开云体育

This sounds like a communications problem between JMRI and the layout. How do you have them connected? Check the JMRI preferences to make sure that they’re still set to the ri

I've got three questions here: 1. I select an entry from my Roster, and then do a Print / Print Preview Selection and no print preview occurs. Am I missing a step? 2. Speed table - what a kewl way to

I have no choice here if I can not get the thing to work or find out why it won't work!

Using the PR3 with a MacBook Pro and a program track and have been doing so for years. No Command system involved

Nick: I don't know what your RFID set up is: our (MRCS) system uses ID12 readers and glasstag (kitty chips) mounted on the trucks, we get very reliable reads up to about 30 scale mph in HO, above that

Thank you for your reply Dave .There was also some one on you-tube that had done this, but could not remember how he done it.and advised me to ask on JMRI.Andrew.

Dave, The schema change for the sensors will be included in the 4.7.7 test release and the 4.8 production release. After upgrading you will no longer need the script to disable schema validation. Dave

Obviously you can throw out JMRI, that is your choice. Thing is JMRI is not the cause of your issue. Kinda like waking up and finding the internet not working so throwing away the modem even though a

Rolling Thunder definition only for programing the Rolling Thunder receiver, the box that connects to a sub-woofer. http://www.broadway-limited.com/1596-rollingthundertmreceiveronly.aspx Michael

Are you using the PR3 as an interface to a Digitrax command station or as a standalone programmer? http://jmri.org/help/en/html/hardware/loconet/PR3.shtml

I posted this message because we could not get JMRI to work on a MacBookPro-Digitrx PR3-track combo that it worked on just last week and for years previously. Since that time, I have gotten some

Peter and Bob, Thanks for the clarification. To me it didn't seem the ops portion need any improvement. I have had some issues but these were my mistakes. Thanks for the continued support and updates

Hello, Curious if anyone has implemented this new detection device from Digitrax. Also, will JMRI have specific support for this device in an upcoming release, or is the current LocoNet support for

If I can ask, what type of RFID system are you using?

Hi Andrew, I produced several hundred of these in both Upper Quadrant and Lower Quadrant, of different lengths and types as well as on Dolls and Gantries. I was using Layout Editor but then finished

Question How do you get a Semaphore signal icon or Semaphore Head for Panel Pro.Andrew.

Richard, Well the log shows things starting up, but then silently dying. No errors showing, no 'normal exit' type message either. So some form of real crash is happening. I'm hoping somebody else

Don, Generally building the tables of the parts (turnouts, sensor, signals) is a good method when you have the hardware first. This lets you quickly test all the parts to make sure things work. Then

It's actually pretty simple: The PR3 has two modes of operation - One is "talk to the LocoNet" (MS100) mode, and the other is "use my (the PR3's) programming outputs" (Stand-alone Programming) mode.

I have never been able to make complete sense out of the Digitrax instructions on "correct mode".