Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
- Jmriusers
- Messages
Search
|
Re: Signal Mast Logic Translation Latency
#sml
Sorry for the trouble you’re having.
Getting "the same result running the layout in simulation” pretty much rules out problems with the physical C/MRI network and LocoNet. So we need to look at what’s happening within JMRI itself. The timescale of "changing the signal aspect from the mast table will choke up and take anywhere from seconds to several minutes to change” is very long to explain by the computer merely being busy. There’s probably some explicit delays in there. It’s not about input timing, debouncing, etc, as you’re seeing it when directly driving the mast aspect from the mast table. Let’s try to get a bit more information which might narrow this down. When testing with the simulator: A) Are you seeing the problem on all masts, or just some? B) Does it happen consistently once it starts, or does it come and go? If it’s consistent, perhaps some resource is getting used up that eventually slows down the operation. C) When delay is happening, do other things seem slow too? E.g. selecting another row in the table, windows moving, pulling down a menu, etc? D) This comment seems to indicate that there are no Logix involved in the signaling: I use logix and a few custom scripts that only run during operations (rarely). The logix is primarily for telling the system a Digitrax LT switch is supposed to correspond to a CMRI CT switch. I also have some logix rules that can disable all turnouts to digitrax users and selectively "unlock" switches by the dispatcher. But nothing directly interacts with signal masts in logix.It would be good to confirm that. There’s a brief time during PanelPro startup where you can press F8 to disable Logix. Could you please try that and see if it makes any difference? E) Similarly, if you _temporarily_ disable any scripts you’re loading in the Preferences -> Startup Pane, does that change anything? F) Finally, could you please open the Memory Usage Monitor from the Debug menu, click “Update”, and let me know what the three numbers say? Then click “Collect Memory”, which will give you three new numbers, please include them in the reply. Thanks! Bob — Bob Jacobsen rgj1927@... |
|
Re: Signal Mast Logic Translation Latency
#sml
I use logix and a few custom scripts that only run during operations (rarely). The logix is primarily for telling the system a Digitrax LT switch is supposed to correspond to a CMRI CT switch. I also have some logix rules that can disable all turnouts to digitrax users and selectively "unlock" switches by the dispatcher. But nothing directly interacts with signal masts in logix. We run at the minimum baud of 9800 for now until our network is complete, then we will consider raising the rate. We are getting no initialization messages, I have monitored the network metrics closely and get a poll time of about 80ms on average. We probably have about 200 ft of cable in the network connecting node to node. We use a RS485 serial with 3 pins (A, B, Ground). Changing how many pins we use is not an option as our custom boards will not allow it. As far as I can tell the CMRI network is running as usual. Some other possibly relevant info: we were running JMRI 5.8 till yesterday when I pushed us to 5.10. We are using the recommended Java version 17. We use output mast matrix "signal masts" for our configuration. We run the NS-2008 system.?? |
|
Re: Difference Between Compare and Reset
#decoderpro
Thomas,
?
While I use a Digitrax EVOXD for main track power, on the programming track where I do all my programming, I use a Sprog 3.
?
Would the possibility of a slot issue affect there?
?
And bluntly, your suggested procedure, while once again cumbersome and time consuming, would not explain why a CVs tab compare would miss the "bad" CV.
?
Regards |
|
Re: Arrival Track & Switcher
#operationspro
Thanks Dan.? Keep forgetting that 1 train restriction.? Had my Arrival track set for pickups "any"
?Doug |
|
Re: Paragon4 (400a) Decoder Programming issues
Joe,
?
I've also posted before about my own experience with CV 217 and Paragon3s. I've mentioned the values that have worked for me with various models (20-70), and that the trick on the programming track seems to be to write the new value, and then read it back to confirm. If the the new value did write, you've found your setting.
?
Regards |
|
Re: Signal Mast Logic Translation Latency
#sml
On 4/10/2025 11:30 PM, Hunter via groups.io wrote:
I am convinced it does not have to do with the CMRI network as I get the same result running the layout in simulation at home on a very powerful computer.Are you using ANY "Logix", "LogixNG", or "Jython Scripting" which can cause a signal mast to change its indication? That could cause the "SML logic" to "oscillate" between indications - one from JMRI's SML logic, and another from the other "logic". I would suggest that you look at the JMRI "Signal Masts" table, and look for one or more masts that are changing in odd ways. What Baud rate are the CPNodes running at? Can you run the network at a higher Baud rate reliably? How much cable exists in your RS-422.RS-485 network? Do you see _any_ problems where JMRI must re-initialize _any_ CMRI nodes? If so, you will need to resolve the problems that cause the "re-initialization" problems. "Re-initialization" should NOT be necessary on a well-architected RS422/RS-485 network. If you have "Re-initialization" problems, then the problem is often a hardware problem. I would suggest that the "4-wire" RS-422/RS-485 connection is likely a problem, and that a properly-installed 5-wire cable, with a "hack" to connect each "fifth wire" to the "ground" _at each end_ will likely reduce/resolve the "re-initialization" problem. But that is not a JMRI problem or a JMRI solution, so I won't go into that any further. There are other "issues" with RS-422/RS-485 networks, but those are not JMRI problems, so I won't go into those any further. |
|
Re: Chaining transits with a different locomotive
#dispatcher
Steve, There is nothing in the log using a basic level.? Does it work if using a simulated connection? I'm using a DCC EX command station and the simulation mode is not very reliable. Can you have a look ? Thanks. Jean-Louis. 09:18:50,153 apps.util.Log4JUtil?????????????????? INFO? - * JMRI log ** [main] 09:18:50,174 apps.util.Log4JUtil?????????????????? INFO? - This log is stored in file: C:\Users\JeanL\JMRI\log\session.log [main] 09:18:50,175 apps.util.Log4JUtil?????????????????? INFO? - This log is appended to file: C:\Users\JeanL\JMRI\log\messages.log [main] 09:18:50,194 apps.Apps???????????????????????????? INFO? - PanelPro version 5.11.4plus+jenkins+20250401T2239Z+R6f2b769ddd3 starts under Java 17.0.14 on Windows 10 amd64 v10.0 at Fri Apr 11 09:18:50 CEST 2025 [main] 09:18:50,322 t.permission.DefaultPermissionManager INFO? - Permission file: C:\Users\JeanL\JMRI\.permissions.xml [main] 09:18:50,332 t.permission.DefaultPermissionManager INFO? - Permission system is enabled: no [main] 09:18:51,815 apps.Apps???????????????????????????? INFO? - Starting with profile JLDModel.3e42cedd [main] 09:18:51,960 jmri.util.node.NodeIdentity?????????? INFO? - Using c45ffa6d-e3ad-4df3-8572-6b22ef38a992 as the JMRI storage identity for profile id 3e42cedd [AWT-EventQueue-0] 09:18:52,061 xml.AbstractSerialConnectionConfigXml INFO? - Starting to connect for "DCC++" [main] 09:18:52,105 jmri.jmrix.dccpp.serial.DCCppAdapter? INFO? - Connecting DCC++ to COM10 USB Serial [main] 09:18:52,108 jmri.jmrix.dccpp.serial.DCCppAdapter? INFO? - DCC++: Port USB-SERIAL CH340 (COM10) opened at 115200 baud, sees DTR: true RTS: true DSR: false CTS: false DCD: false flow: NONE [main] 09:18:52,164 mrix.dccpp.DCCppInitializationManager INFO? - DCC++ Initialization Complete [main] 09:18:52,729 jmri.jmrit.roster.Roster????????????? INFO? - Reading roster file with rootFromName(D:\Documents\JL\JRMI\JLDModel\JLDModel.jmri\roster.xml) [main] 09:18:53,376 jmri.util.startup.PerformFileModel??? INFO? - Loading file D:\Documents\JL\JRMI\JLDModel\JLDModel.jmri\Tables.xml [main] 09:18:58,385 jmri.util.startup.PerformScriptModel? INFO? - Running script D:\Documents\JL\JRMI\JLDModel\JLDModel.jmri\PowerOn.py [main] 09:18:58,402 jmri.jmrix.dccpp.DCCppCommandStation? INFO? - Station Type set to 'DCC-EX' [AWT-EventQueue-0] 09:18:58,403 jmri.jmrix.dccpp.DCCppCommandStation? INFO? - Build set to 'c389fe9' [AWT-EventQueue-0] 09:18:58,403 jmri.jmrix.dccpp.DCCppCommandStation? INFO? - Version set to '5.4.6' [AWT-EventQueue-0] 09:18:58,441 jmri.jmrix.dccpp.DCCppCommandStation? INFO? - changing maxNumSlots from 12 to 50 [AWT-EventQueue-0] 09:18:58,909 jmri.web.server.WebServer???????????? INFO? - Starting Web Server on port 12080 [WebServer] 09:18:59,722 jmri.web.server.WebServer???????????? INFO? - Starting ZeroConfService _http._tcp.local for Web Server with properties {path=/, json=5.4.0} [WebServer] 09:19:02,220 jmri.util.FileUtilSupport???????????? INFO? - File path program: is C:\Program Files (x86)\JMRI\ [main] 09:19:02,221 jmri.util.FileUtilSupport???????????? INFO? - File path preference: is D:\Documents\JL\JRMI\JLDModel\JLDModel.jmri\ [main] 09:19:02,221 jmri.util.FileUtilSupport???????????? INFO? - File path profile: is D:\Documents\JL\JRMI\JLDModel\JLDModel.jmri\ [main] 09:19:02,221 jmri.util.FileUtilSupport???????????? INFO? - File path settings: is C:\Users\JeanL\JMRI\ [main] 09:19:02,221 jmri.util.FileUtilSupport???????????? INFO? - File path home: is C:\Users\JeanL\ [main] 09:19:02,222 jmri.util.FileUtilSupport???????????? INFO? - File path scripts: is C:\Program Files (x86)\JMRI\jython\ [main] 09:19:02,533 t.display.layoutEditor.BlockValueFile INFO? - 2 of 2 block values restored. Rule=RESTOREALWAYS, Power=ON [main] 09:19:02,836 apps.PanelPro.PanelPro??????????????? INFO? - Main initialization done [main] 09:20:07,443 jmri.jmrit.dispatcher.AutoTrainAction INFO? - Section[[IY:AUTO:0021( Spur )] LoadTrain [Spur_Bypass.xml] [Monitor Train Transit Action 3] 09:20:31,581 jmri.jmrit.dispatcher.AutoTrainAction INFO? - Section[[IY:AUTO:0003( Bypass )] LoadTrain [Station_station.xml] [Monitor Train Transit Action 3] 09:21:04,731 jmri.jmrit.dispatcher.AutoTrainAction INFO? - Section[[IY:AUTO:0001( Station )] LoadTrain [Bypass_Spur_.xml] [Monitor Train Transit Action 5] 09:21:25,044 jmri.jmrit.dispatcher.AutoTrainAction INFO? - Section[[IY:AUTO:0021( Spur )] LoadTrain [Spur_Bypass.xml] [Monitor Train Transit Action 3] 09:23:10,860 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[45.520813] remaining. [Allocated Section Block Change on MainEast] 09:23:19,949 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[13.595825] remaining. [Allocated Section Block Change on MainEast] 09:23:31,439 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[45.520813] remaining. [Allocated Section Block Change on MainEast] 09:23:44,372 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[13.595825] remaining. [Allocated Section Block Change on MainEast] 09:23:56,697 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[45.520813] remaining. [Allocated Section Block Change on MainEast] 09:24:09,549 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[13.595825] remaining. [Allocated Section Block Change on MainEast] 09:24:16,964 jmri.jmrit.audio.JoalAudioFactory???? INFO? - Initialised JOAL using OpenAL: vendor - OpenAL Community version - 1.1 ALSOFT 1.23.1 [Listed Table Generation] 09:24:16,992 s.configurexml.DefaultIdTagManagerXml INFO? - Using PanelProIdTags.xml for tag storage [Listed Table Generation] 09:24:17,003 s.configurexml.DefaultIdTagManagerXml INFO? - Using PanelProRailComIdTags.xml for tag storage [Listed Table Generation] 09:24:22,021 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[45.520813] remaining. [Allocated Section Block Change on MainEast] 09:24:34,967 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[13.595825] remaining. [Allocated Section Block Change on MainEast] 09:24:47,241 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[45.520813] remaining. [Allocated Section Block Change on MainEast] 09:24:51,082 jmri.jmrit.consisttool.ConsistFile??? INFO? - Consist file does not exist.? One will be created if necessary. [AWT-EventQueue-0] 09:24:58,951 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[13.595825] remaining. [Allocated Section Block Change on MainEast] 09:25:12,064 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[45.520813] remaining. [Allocated Section Block Change on MainEast] 09:25:24,933 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[13.595825] remaining. [Allocated Section Block Change on MainEast] 09:25:37,292 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[45.520813] remaining. [Allocated Section Block Change on MainEast] 09:25:50,033 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[13.595825] remaining. [Allocated Section Block Change on MainEast] 09:26:02,326 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[45.520813] remaining. [Allocated Section Block Change on MainEast] 09:26:15,033 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[13.595825] remaining. [Allocated Section Block Change on MainEast] 09:26:27,412 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[45.520813] remaining. [Allocated Section Block Change on MainEast] 09:26:40,046 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[13.595825] remaining. [Allocated Section Block Change on MainEast] 09:26:52,373 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[45.520813] remaining. [Allocated Section Block Change on MainEast] 09:27:05,153 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[13.595825] remaining. [Allocated Section Block Change on MainEast] 09:27:17,241 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[45.520813] remaining. [Allocated Section Block Change on MainEast] 09:27:29,729 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[13.595825] remaining. [Allocated Section Block Change on MainEast] 09:27:42,057 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[45.520813] remaining. [Allocated Section Block Change on MainEast] 09:27:54,564 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[13.595825] remaining. [Allocated Section Block Change on MainEast] 09:28:06,962 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[45.520813] remaining. [Allocated Section Block Change on MainEast] 09:28:19,558 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[13.595825] remaining. [Allocated Section Block Change on MainEast] 09:28:31,982 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[45.520813] remaining. [Allocated Section Block Change on MainEast] 09:28:44,504 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[13.595825] remaining. [Allocated Section Block Change on MainEast] 09:28:56,819 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[45.520813] remaining. [Allocated Section Block Change on MainEast] 09:29:09,492 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[13.595825] remaining. [Allocated Section Block Change on MainEast] 09:29:21,774 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[45.520813] remaining. [Allocated Section Block Change on MainEast] 09:29:34,135 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[13.595825] remaining. [Allocated Section Block Change on MainEast] 09:29:46,446 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[45.520813] remaining. [Allocated Section Block Change on MainEast] 09:29:58,997 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[13.595825] remaining. [Allocated Section Block Change on MainEast] 09:30:11,280 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[45.520813] remaining. [Allocated Section Block Change on MainEast] 09:30:24,013 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[13.595825] remaining. [Allocated Section Block Change on MainEast] 09:30:36,364 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[45.520813] remaining. [Allocated Section Block Change on MainEast] 09:30:48,887 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[13.595825] remaining. [Allocated Section Block Change on MainEast] 09:31:01,354 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[45.520813] remaining. [Allocated Section Block Change on MainEast] 09:31:13,888 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[13.595825] remaining. [Allocated Section Block Change on MainEast] 09:31:26,237 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[45.520813] remaining. [Allocated Section Block Change on MainEast] 09:31:38,730 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[13.595825] remaining. [Allocated Section Block Change on MainEast] 09:31:51,050 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[45.520813] remaining. [Allocated Section Block Change on MainEast] 09:32:03,696 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[13.595825] remaining. [Allocated Section Block Change on MainEast] 09:32:16,089 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[45.520813] remaining. [Allocated Section Block Change on MainEast] 09:32:28,722 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[13.595825] remaining. [Allocated Section Block Change on MainEast] 09:32:41,099 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[45.520813] remaining. [Allocated Section Block Change on MainEast] 09:32:53,554 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[13.595825] remaining. [Allocated Section Block Change on MainEast] 09:33:05,994 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[45.520813] remaining. [Allocated Section Block Change on MainEast] 09:33:18,323 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[13.595825] remaining. [Allocated Section Block Change on MainEast] 09:33:30,706 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[45.520813] remaining. [Allocated Section Block Change on MainEast] 09:33:43,529 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[13.595825] remaining. [Allocated Section Block Change on MainEast] 09:33:55,933 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[45.520813] remaining. [Allocated Section Block Change on MainEast] 09:34:08,631 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[13.595825] remaining. [Allocated Section Block Change on MainEast] 09:34:21,130 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[45.520813] remaining. [Allocated Section Block Change on MainEast] 09:34:33,788 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[13.595825] remaining. [Allocated Section Block Change on MainEast] 09:34:46,298 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[45.520813] remaining. [Allocated Section Block Change on MainEast] 09:34:58,886 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[13.595825] remaining. [Allocated Section Block Change on MainEast] 09:35:11,341 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[45.520813] remaining. [Allocated Section Block Change on MainEast] 09:35:24,108 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[13.595825] remaining. [Allocated Section Block Change on MainEast] 09:35:36,473 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[45.520813] remaining. [Allocated Section Block Change on MainEast] 09:35:49,178 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[13.595825] remaining. [Allocated Section Block Change on MainEast] 09:36:01,582 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[45.520813] remaining. [Allocated Section Block Change on MainEast] 09:36:14,315 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[13.595825] remaining. [Allocated Section Block Change on MainEast] 09:36:26,794 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[45.520813] remaining. [Allocated Section Block Change on MainEast] 09:36:39,377 jmri.jmrit.roster.RosterSpeedProfile? WARN? - Throttle destroyed before zero length[13.595825] remaining. [Allocated Section Block Change on MainEast] 09:37:53,570 jmri.jmrit.dispatcher.AutoTrainAction INFO? - Section[[IY:AUTO:0001( Station )] LoadTrain [Bypass_Spur_.xml] [Monitor Train Transit Action 5] 09:38:11,162 jmri.jmrit.dispatcher.AutoTrainAction INFO? - Section[[IY:AUTO:0021( Spur )] LoadTrain [Spur_Bypass.xml] [Monitor Train Transit Action 3] 09:39:38,606 ri.jmrit.beantable.TransitTableAction WARN? - Unhandled transit section action When code: 0 [AWT-EventQueue-0] 09:40:08,586 ri.jmrit.beantable.TransitTableAction WARN? - Unhandled transit section action When code: 0 [AWT-EventQueue-0] 09:40:08,697 ri.jmrit.beantable.TransitTableAction WARN? - Unhandled transit section action When code: 0 [AWT-EventQueue-0] 09:40:36,023 ri.jmrit.beantable.TransitTableAction WARN? - Unhandled transit section action When code: 0 [AWT-EventQueue-0] 09:41:25,123 jmri.jmrit.dispatcher.AutoTrainAction INFO? - Section[[IY:AUTO:0021( Spur )] LoadTrain [Spur_Bypass.xml] [Monitor Train Transit Action 3] 09:41:49,754 jmri.jmrit.dispatcher.AutoTrainAction INFO? - Section[[IY:AUTO:0003( Bypass )] LoadTrain [Station_station.xml] [Monitor Train Transit Action 3] 09:42:22,657 jmri.jmrit.dispatcher.AutoTrainAction INFO? - Section[[IY:AUTO:0001( Station )] LoadTrain [Bypass_Spur_.xml] [Monitor Train Transit Action 5] 09:42:42,503 jmri.jmrit.dispatcher.AutoTrainAction INFO? - Section[[IY:AUTO:0021( Spur )] LoadTrain [Spur_Bypass.xml] [Monitor Train Transit Action 3] 09:43:06,978 jmri.jmrit.dispatcher.AutoTrainAction INFO? - Section[[IY:AUTO:0003( Bypass )] LoadTrain [Station_station.xml] [Monitor Train Transit Action 3] 09:43:39,849 jmri.jmrit.dispatcher.AutoTrainAction INFO? - Section[[IY:AUTO:0001( Station )] LoadTrain [Bypass_Spur_.xml] [Monitor Train Transit Action 5] 09:43:59,759 jmri.jmrit.dispatcher.AutoTrainAction INFO? - Section[[IY:AUTO:0021( Spur )] LoadTrain [Spur_Bypass.xml] [Monitor Train Transit Action 3] 09:45:12,836 ri.jmrit.beantable.TransitTableAction WARN? - Unhandled transit section action When code: 0 [AWT-EventQueue-0] 09:45:25,647 ri.jmrit.beantable.TransitTableAction WARN? - Unhandled transit section action When code: 0 [AWT-EventQueue-0] 09:45:25,655 ri.jmrit.beantable.TransitTableAction WARN? - Unhandled transit section action When code: 0 [AWT-EventQueue-0] 09:45:25,662 ri.jmrit.beantable.TransitTableAction WARN? - Unhandled transit section action When code: 0 [AWT-EventQueue-0] 09:45:25,671 ri.jmrit.beantable.TransitTableAction WARN? - Unhandled transit section action When code: 0 [AWT-EventQueue-0] 09:45:25,678 ri.jmrit.beantable.TransitTableAction WARN? - Unhandled transit section action When code: 0 [AWT-EventQueue-0] 09:45:25,895 ri.jmrit.beantable.TransitTableAction WARN? - Unhandled transit section action When code: 0 [AWT-EventQueue-0] 09:45:25,902 ri.jmrit.beantable.TransitTableAction WARN? - Unhandled transit section action When code: 0 [AWT-EventQueue-0] 09:45:25,911 ri.jmrit.beantable.TransitTableAction WARN? - Unhandled transit section action When code: 0 [AWT-EventQueue-0] 09:45:25,919 ri.jmrit.beantable.TransitTableAction WARN? - Unhandled transit section action When code: 0 [AWT-EventQueue-0] 09:45:25,927 ri.jmrit.beantable.TransitTableAction WARN? - Unhandled transit section action When code: 0 [AWT-EventQueue-0] 09:45:27,089 ri.jmrit.beantable.TransitTableAction WARN? - Unhandled transit section action When code: 0 [AWT-EventQueue-0] 09:49:14,865 jmri.jmrit.dispatcher.AutoTrainAction INFO? - Section[[IY:AUTO:0021( Spur )] LoadTrain [Spur_Bypass.xml] [Monitor Train Transit Action 3] 09:49:39,907 jmri.jmrit.dispatcher.AutoTrainAction INFO? - Section[[IY:AUTO:0003( Bypass )] LoadTrain [Station_station.xml] [Monitor Train Transit Action 3] 09:50:12,839 jmri.jmrit.dispatcher.AutoTrainAction INFO? - Section[[IY:AUTO:0001( Station )] LoadTrain [Bypass_Spur_.xml] [Monitor Train Transit Action 5] 09:50:33,131 jmri.jmrit.dispatcher.AutoTrainAction INFO? - Section[[IY:AUTO:0021( Spur )] LoadTrain [Spur_Bypass.xml] [Monitor Train Transit Action 3] 11:16:56,067 t.display.layoutEditor.BlockValueFile INFO? - 2 of 2 block values restored. Rule=RESTOREALWAYS, Power=ON [Thread-40] 11:25:54,941 apps.jmrit.log.Log4JTreePane????????? INFO? - changing Logging for jmri.jmrit.dispatcher to DEBUG [AWT-EventQueue-0] 11:26:02,645 apps.jmrit.log.Log4JTreePane????????? INFO? - changing Logging for jmri.jmrit.dispatcher to DEBUG [AWT-EventQueue-0] 11:27:02,919 jmri.jmrit.dispatcher.TrainInfoFile?? DEBUG - entered readTrainInfo for TrainInfoDefaultTemplate.xml [AWT-EventQueue-0] 11:27:02,948 jmri.jmrit.dispatcher.TrainInfoFile?? DEBUG - directory of TrainInfoFiles is D:\Documents\JL\JRMI\JLDModel\JLDModel.jmri\dispatcher\traininfo\ [AWT-EventQueue-0] 11:27:04,620 jmri.jmrit.dispatcher.TrainInfoFile?? DEBUG - directory of TrainInfoFiles is D:\Documents\JL\JRMI\JLDModel\JLDModel.jmri\dispatcher\traininfo\ [AWT-EventQueue-0] 11:27:04,621 jmri.jmrit.dispatcher.TrainInfoFile?? DEBUG - entered readTrainInfo for Bypass_Bypass_.xml [AWT-EventQueue-0] 11:27:04,623 jmri.jmrit.dispatcher.TrainInfoFile?? DEBUG - entered readTrainInfo for Bypass_Bypass_CW_D.xml [AWT-EventQueue-0] 11:27:04,626 jmri.jmrit.dispatcher.TrainInfoFile?? DEBUG - entered readTrainInfo for Bypass_Bypass_via_Station.xml [AWT-EventQueue-0] 11:27:04,629 jmri.jmrit.dispatcher.TrainInfoFile?? DEBUG - entered readTrainInfo for Bypass_Spur_.xml [AWT-EventQueue-0] 11:27:04,632 jmri.jmrit.dispatcher.TrainInfoFile?? DEBUG - entered readTrainInfo for Spur_Bypass.xml [AWT-EventQueue-0] 11:27:04,634 jmri.jmrit.dispatcher.TrainInfoFile?? DEBUG - entered readTrainInfo for Spur_Station_CCW.xml [AWT-EventQueue-0] 11:27:04,637 jmri.jmrit.dispatcher.TrainInfoFile?? DEBUG - entered readTrainInfo for Station_Spur.xml [AWT-EventQueue-0] 11:27:04,640 jmri.jmrit.dispatcher.TrainInfoFile?? DEBUG - entered readTrainInfo for Station_Station_CW_D.xml [AWT-EventQueue-0] 11:27:04,643 jmri.jmrit.dispatcher.TrainInfoFile?? DEBUG - entered readTrainInfo for Station_Station_via_Bypass.xml [AWT-EventQueue-0] 11:27:04,645 jmri.jmrit.dispatcher.TrainInfoFile?? DEBUG - entered readTrainInfo for Station_station.xml [AWT-EventQueue-0] 11:27:10,106 jmri.jmrit.dispatcher.TrainInfoFile?? DEBUG - entered readTrainInfo for Bypass_Spur_.xml [AWT-EventQueue-0] 11:27:15,741 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - loading train:, startblockname:Bypass-1, destinationBlockName:Spur [AWT-EventQueue-0] 11:27:15,741 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - trainID:BR-218, tSource:1, startBlockName:Bypass, startBlockSectionSequenceNumber:1, endBlockName:Spur, endBlockSectionSequenceNumber:5 [AWT-EventQueue-0] 11:27:15,742 jmri.jmrit.dispatcher.AutoTrainsFrame DEBUG - Adding ActiveTrain[BR-218 / Bypass-Spur CW] [AWT-EventQueue-0] 11:27:15,750 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: New AutoEngineer, address=3(S), length (mm)=2296, factor=1.0, useSpeedProfile=false [AWT-EventQueue-0] 11:27:15,750 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: requested roster entry 'BR-218', address=3, use speed profile requested=true usespeedprofile set=true [AWT-EventQueue-0] 11:27:15,751 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - First allocation returned null, normal for auotallocate [AWT-EventQueue-0] 11:27:15,751 jmri.jmrit.dispatcher.AutoTrainAction DEBUG - Adding TransitSection[IY:AUTO:0003( Bypass )] [Auto Allocator ] 11:27:15,751 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218 / Bypass-Spur CW:Next Section Expected[true] [Auto Allocator ] 11:27:15,752 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: new current signalmast SM-T1D (IF$shsm:basic:one-low(T1-D))(Stop) for section Bypass (IY:AUTO:0003) [Auto Allocator ] 11:27:15,752 jmri.jmrit.dispatcher.AutoTrainsFrame DEBUG - NewStatus[1] [Auto Allocator ] 11:27:15,752 jmri.jmrit.dispatcher.AutoTrainsFrame DEBUG - [BR-218 / Bypass-Spur CW]:Set new throttle [Auto Allocator ] 11:27:15,757 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - BR-218: Allocated section [Bypass (IY:AUTO:0003)] [Auto Allocator ] 11:27:15,758 jmri.jmrit.dispatcher.AutoAllocate??? DEBUG - BR-218: auto allocating Section T1 (IY:AUTO:0018) [Auto Allocator ] 11:27:15,758 jmri.jmrit.dispatcher.AutoTurnouts??? DEBUG - BR-218: turnout T1 commanded to Thrown (+) [Auto Allocator ] 11:27:15,859 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - BR-218: Allocated section [T1 (IY:AUTO:0018)] [Auto Allocator ] 11:27:15,859 jmri.jmrit.dispatcher.AutoAllocate??? DEBUG - BR-218: auto allocating Section MainEast (IY:AUTO:0002) [Auto Allocator ] 11:27:15,865 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - BR-218: Allocated section [MainEast (IY:AUTO:0002)] [Auto Allocator ] 11:27:15,865 jmri.jmrit.dispatcher.AutoAllocate??? DEBUG - BR-218: auto allocating Section T2 (IY:AUTO:0019) [Auto Allocator ] 11:27:15,865 jmri.jmrit.dispatcher.AutoTurnouts??? DEBUG - BR-218: turnout T2 commanded to Thrown (+) [Auto Allocator ] 11:27:15,968 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - BR-218: Allocated section [T2 (IY:AUTO:0019)] [Auto Allocator ] 11:27:16,252 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - [BR-218 / Bypass-Spur CW]flipping direction was [false] now [true] [AWT-EventQueue-0] 11:27:16,252 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - 3(S): _speedIncrement=Infinity [AWT-EventQueue-0] 11:27:16,252 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: stopping for signal [SM-T1D (IF$shsm:basic:one-low(T1-D))]? [AWT-EventQueue-0] 11:27:16,252 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: StopInCurrentSection called for Bypass (IY:AUTO:0003) task[0] targetspeed[0.0] [AWT-EventQueue-0] 11:27:16,253 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: train is already stopped or stopping. [AWT-EventQueue-0] 11:27:16,537 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: SM-T1D (IF$shsm:basic:one-low(T1-D))(Approach) Medium(50), Dest: SM-T2TC (IF$shsm:basic:one-low(T2-TC)), path max: 100 [AWT-EventQueue-0] 11:27:16,537 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: Signal SM-T1D (IF$shsm:basic:one-low(T1-D)) setting speed to 50.0 for next [AWT-EventQueue-0] 11:27:16,537 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: setTargetSpeedValue: Speed[50.0] [AWT-EventQueue-0] 11:27:16,537 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: setTargetSpeedByProfile: 0.5 SpeedState[50.0] [AWT-EventQueue-0] 11:27:16,538 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - setTargetSpeed: Set Speed[0.5] adjusted to TargetSpeed[0.5]? [AWT-EventQueue-0] 11:27:16,891 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: SM-T1D (IF$shsm:basic:one-low(T1-D))(Clear) Normal(100), Dest: SM-T2TC (IF$shsm:basic:one-low(T2-TC)), path max: 100 [AWT-EventQueue-0] 11:27:16,891 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: Signal SM-T1D (IF$shsm:basic:one-low(T1-D)) setting speed to 100.0 for previous [AWT-EventQueue-0] 11:27:16,891 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: setTargetSpeedValue: Speed[50.0] [AWT-EventQueue-0] 11:27:16,891 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: setTargetSpeedByProfile: 0.5 SpeedState[50.0] [AWT-EventQueue-0] 11:27:16,892 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - setTargetSpeed: Set Speed[0.5] adjusted to TargetSpeed[0.5]? [AWT-EventQueue-0] 11:27:21,686 jmri.jmrit.dispatcher.AutoTrainAction DEBUG - Adding TransitSection[IY:AUTO:0018( T1 )] [AWT-EventQueue-0] 11:27:21,686 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218 / Bypass-Spur CW:Next Section Expected[true] [AWT-EventQueue-0] 11:27:21,687 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: handleBlockStateChange to OCCUPIED section T1 (IY:AUTO:0018), block T1 (IB:AUTO:0006), length 150 [Allocated Section Block Change on T1] 11:27:21,687 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: new current signalmast is null for section T1 (IY:AUTO:0018) - sometimes OK [Allocated Section Block Change on T1] 11:27:21,688 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - BR-218: Allocated section [Spur (IY:AUTO:0021)] [Auto Allocator ] 11:27:22,504 jmri.jmrit.dispatcher.AutoTrainAction DEBUG - Adding TransitSection[IY:AUTO:0002( MainEast )] [AWT-EventQueue-0] 11:27:22,504 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218 / Bypass-Spur CW:Next Section Expected[true] [AWT-EventQueue-0] 11:27:22,505 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: handleBlockStateChange to OCCUPIED section MainEast (IY:AUTO:0002), block MainEast (IB:AUTO:0002), length 450 [Allocated Section Block Change on MainEast] 11:27:22,506 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: new current signalmast SM-T2TC (IF$shsm:basic:one-low(T2-TC))(Approach) for section MainEast (IY:AUTO:0002) [Allocated Section Block Change on MainEast] 11:27:22,506 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: SM-T2TC (IF$shsm:basic:one-low(T2-TC))(Approach) Medium(50), Dest: Spur (IF$vsm:basic:one-searchlight($0006)), path max: 50 [Allocated Section Block Change on MainEast] 11:27:22,506 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: Signal SM-T2TC (IF$shsm:basic:one-low(T2-TC)) setting speed to 50.0 for next [Allocated Section Block Change on MainEast] 11:27:22,506 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: setTargetSpeedValue: Speed[50.0] [Allocated Section Block Change on MainEast] 11:27:22,507 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: setTargetSpeedByProfile: 0.5 SpeedState[50.0] [Allocated Section Block Change on MainEast] 11:27:22,507 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - setTargetSpeed: Set Speed[0.5] adjusted to TargetSpeed[0.5]? [Allocated Section Block Change on MainEast] 11:27:23,405 jmri.jmrit.dispatcher.AutoTrainAction DEBUG - Remove TransitSection[IY:AUTO:0003( Bypass )] [AWT-EventQueue-0] 11:27:23,405 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - BR-218: sectionNotRequiredByHeadOnly Stopping at Secion [T1] excluding from length. [Auto Allocator ] 11:27:23,406 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - [BR-218]:Release Section [Bypass] by Length allocated [2000] release [2000] train [2296] [Auto Allocator ] 11:27:23,406 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: handleBlockStateChange to UNOCCUPIED - Section Bypass (IY:AUTO:0003), Block Bypass (IB:AUTO:0001), speed 0.5 [Allocated Section Block Change on Bypass] 11:27:24,275 jmri.jmrit.dispatcher.AutoTrainAction DEBUG - Remove TransitSection[IY:AUTO:0018( T1 )] [AWT-EventQueue-0] 11:27:24,275 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - BR-218: sectionNotRequiredByHeadOnly Stopping at Secion [MainEast] excluding from length. [Auto Allocator ] 11:27:24,275 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - [BR-218]:Release Section [Bypass] by Length allocated [2150] release [2000] train [2296] [Auto Allocator ] 11:27:24,276 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: handleBlockStateChange to UNOCCUPIED - Section T1 (IY:AUTO:0018), Block T1 (IB:AUTO:0006), speed 0.5 [Allocated Section Block Change on T1] 11:27:25,000 jmri.jmrit.dispatcher.AutoTrainAction DEBUG - Adding TransitSection[IY:AUTO:0019( T2 )] [AWT-EventQueue-0] 11:27:25,001 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218 / Bypass-Spur CW:Next Section Expected[true] [AWT-EventQueue-0] 11:27:25,001 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - BR-218: sectionNotRequiredByHeadOnly Stopping at Secion [MainEast] excluding from length. [Auto Allocator ] 11:27:25,001 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - [BR-218]:Release Section [Bypass] by Length allocated [2150] release [2000] train [2296] [Auto Allocator ] 11:27:25,002 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: handleBlockStateChange to OCCUPIED section T2 (IY:AUTO:0019), block T2 (IB:AUTO:0008), length 150 [Allocated Section Block Change on T2] 11:27:25,002 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: new current signalmast is null for section T2 (IY:AUTO:0019) - sometimes OK [Allocated Section Block Change on T2] 11:27:25,901 jmri.jmrit.dispatcher.AutoTrainAction DEBUG - Remove TransitSection[IY:AUTO:0002( MainEast )] [AWT-EventQueue-0] 11:27:25,902 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - BR-218: sectionNotRequiredByHeadOnly Stopping at Secion [T2] excluding from length. [Auto Allocator ] 11:27:25,902 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - [BR-218]:Release Section [Bypass] by Length allocated [2600] release [2000] train [2296] [Auto Allocator ] 11:27:25,902 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: handleBlockStateChange to UNOCCUPIED - Section MainEast (IY:AUTO:0002), Block MainEast (IB:AUTO:0002), speed 0.5 [Allocated Section Block Change on MainEast] 11:27:25,909 jmri.jmrit.dispatcher.AutoTrainAction DEBUG - Adding TransitSection[IY:AUTO:0021( Spur )] [AWT-EventQueue-0] 11:27:25,910 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218 / Bypass-Spur CW:Next Section Expected[false] [AWT-EventQueue-0] 11:27:25,910 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - BR-218: sectionNotRequiredByHeadOnly Stopping at Secion [T2] excluding from length. [Auto Allocator ] 11:27:25,910 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - [BR-218]:Release Section [Bypass] by Length allocated [2600] release [2000] train [2296] [Auto Allocator ] 11:27:25,910 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: handleBlockStateChange to OCCUPIED section Spur (IY:AUTO:0021), block Spur (IB:AUTO:0004), length 1100 [Allocated Section Block Change on Spur] 11:27:25,911 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: Trip end, stop in Current Section, Block= Spur (IB:AUTO:0004) [Allocated Section Block Change on Spur] 11:27:25,911 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: StopInCurrentSection called for Spur (IY:AUTO:0021) task[4] targetspeed[0.5] [Allocated Section Block Change on Spur] 11:27:25,911 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: Section [Spur (IY:AUTO:0021)] Section Length[1100] Max Train Length [2296] StopBySpeedProfile [true]. setStopNow [Allocated Section Block Change on Spur] 11:27:25,911 mri.jmrit.dispatcher.AllocatedSection DEBUG - Remaining length in section[Spur] is [1100.0] [Allocated Section Block Change on Spur] 11:27:25,911 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - Set Target Speed[0.0] with distance{1100.0] from speed[0.5] [Allocated Section Block Change on Spur] 11:27:27,682 jmri.jmrit.dispatcher.AutoTrainAction DEBUG - Remove TransitSection[IY:AUTO:0019( T2 )] [AWT-EventQueue-0] 11:27:27,682 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - BR-218: sectionNotRequiredByHeadOnly Stopping at Secion [Spur] excluding from length. [Auto Allocator ] 11:27:27,682 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - [BR-218]:Release Section [Bypass] by Length allocated [2750] release [2000] train [2296] [Auto Allocator ] 11:27:27,683 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: handleBlockStateChange to UNOCCUPIED - Section T2 (IY:AUTO:0019), Block T2 (IB:AUTO:0008), speed 0.0 [Allocated Section Block Change on T2] 11:27:33,465 jmri.jmrit.dispatcher.AutoTrainAction INFO? - Section[[IY:AUTO:0021( Spur )] LoadTrain [Spur_Bypass.xml] [Monitor Train Transit Action 3] 11:27:33,465 jmri.jmrit.dispatcher.AutoTrainAction DEBUG - Spinning off load of Spur_Bypass.xml, using Roster entry BR-218 [Monitor Train Transit Action 3] 11:27:33,465 jmri.jmrit.dispatcher.AutoTrainAction DEBUG - Delay Starting for Code [18] in Section [IY:AUTO:0021( Spur )] for [1500] [Monitor Train Transit Action 3] 11:27:33,499 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - BR-218: sectionNotRequiredByHeadOnly Stopping at Secion [Spur] including in length. [Auto Allocator ] 11:27:33,499 jmri.jmrit.dispatcher.AutoTrainsFrame DEBUG - NewStatus[64] [Wait for stop BR-218 / Bypass-Spur CW] 11:27:33,499 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - [BR-218]:Release Section [Bypass] by Length allocated [3850] release [2000] train [2296] [Auto Allocator ] 11:27:33,502 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - Section[Spur] State [4] [Wait for stop BR-218 / Bypass-Spur CW] 11:27:35,466 jmri.jmrit.dispatcher.TrainInfoFile?? DEBUG - entered readTrainInfo for Spur_Bypass.xml [AWT-EventQueue-0] 11:27:35,471 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - loading train:, startblockname:Spur-1, destinationBlockName:Bypass [AWT-EventQueue-0] 11:27:35,471 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - trainID:BR-218, tSource:1, startBlockName:Spur, startBlockSectionSequenceNumber:1, endBlockName:Bypass, endBlockSectionSequenceNumber:5 [AWT-EventQueue-0] 11:27:35,473 jmri.jmrit.dispatcher.AutoTrainsFrame DEBUG - Adding ActiveTrain[BR-218 / Spur-Bypass CCW] [AWT-EventQueue-0] 11:27:35,478 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: New AutoEngineer, address=3(S), length (mm)=2296, factor=1.0, useSpeedProfile=false [AWT-EventQueue-0] 11:27:35,479 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: requested roster entry 'BR-218', address=3, use speed profile requested=true usespeedprofile set=true [AWT-EventQueue-0] 11:27:35,479 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - First allocation returned null, normal for auotallocate [AWT-EventQueue-0] 11:27:35,479 jmri.jmrit.dispatcher.AutoTrainAction DEBUG - Adding TransitSection[IY:AUTO:0021( Spur )] [Auto Allocator ] 11:27:35,479 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218 / Spur-Bypass CCW:Next Section Expected[true] [Auto Allocator ] 11:27:35,480 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: new current signalmast SM-T2D (IF$shsm:basic:one-low(T2-D))(Clear) for section Spur (IY:AUTO:0021) [Auto Allocator ] 11:27:35,480 jmri.jmrit.dispatcher.AutoTrainsFrame DEBUG - NewStatus[1] [Auto Allocator ] 11:27:35,480 jmri.jmrit.dispatcher.AutoTrainsFrame DEBUG - [BR-218 / Spur-Bypass CCW]:Set new throttle [Auto Allocator ] 11:27:35,489 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - BR-218: Allocated section [Spur (IY:AUTO:0021)] [Auto Allocator ] 11:27:35,489 jmri.jmrit.dispatcher.AutoAllocate??? DEBUG - BR-218: auto allocating Section T2 (IY:AUTO:0019) [Auto Allocator ] 11:27:35,489 jmri.jmrit.dispatcher.AutoTurnouts??? DEBUG - BR-218: turnout T2 (DT201) already Thrown (+), skipping [Auto Allocator ] 11:27:35,491 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - BR-218: Allocated section [T2 (IY:AUTO:0019)] [Auto Allocator ] 11:27:35,491 jmri.jmrit.dispatcher.AutoAllocate??? DEBUG - BR-218: auto allocating Section MainEast (IY:AUTO:0002) [Auto Allocator ] 11:27:35,492 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - BR-218: Allocated section [MainEast (IY:AUTO:0002)] [Auto Allocator ] 11:27:35,493 jmri.jmrit.dispatcher.AutoAllocate??? DEBUG - BR-218: auto allocating Section T1 (IY:AUTO:0018) [Auto Allocator ] 11:27:35,493 jmri.jmrit.dispatcher.AutoTurnouts??? DEBUG - BR-218: turnout T1 (DT200) already Thrown (+), skipping [Auto Allocator ] 11:27:35,493 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - BR-218: Allocated section [T1 (IY:AUTO:0018)] [Auto Allocator ] 11:27:35,494 jmri.jmrit.dispatcher.AutoAllocate??? DEBUG - BR-218: auto allocating Section Bypass (IY:AUTO:0003) [Auto Allocator ] 11:27:35,496 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - BR-218: Allocated section [Bypass (IY:AUTO:0003)] [Auto Allocator ] 11:27:35,981 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - [BR-218 / Spur-Bypass CCW]flipping direction was [true] now [false] [AWT-EventQueue-0] 11:27:35,981 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - 3(S): _speedIncrement=Infinity [AWT-EventQueue-0] 11:27:35,981 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: SM-T2D (IF$shsm:basic:one-low(T2-D))(Clear) Normal(100), Dest: SM-T1TC (IF$shsm:basic:one-low(T1-TC)), path max: 100 [AWT-EventQueue-0] 11:27:35,981 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: Signal SM-T2D (IF$shsm:basic:one-low(T2-D)) setting speed to 100.0 for next [AWT-EventQueue-0] 11:27:35,981 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: setTargetSpeedValue: Speed[100.0] [AWT-EventQueue-0] 11:27:35,981 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: setTargetSpeedByProfile: 1.0 SpeedState[100.0] [AWT-EventQueue-0] 11:27:35,982 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - setTargetSpeed: Set Speed[1.0] adjusted to TargetSpeed[0.8]? [AWT-EventQueue-0] 11:27:40,067 jmri.jmrit.dispatcher.AutoTrainAction DEBUG - Adding TransitSection[IY:AUTO:0019( T2 )] [AWT-EventQueue-0] 11:27:40,068 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218 / Spur-Bypass CCW:Next Section Expected[true] [AWT-EventQueue-0] 11:27:40,068 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: handleBlockStateChange to OCCUPIED section T2 (IY:AUTO:0019), block T2 (IB:AUTO:0008), length 150 [Allocated Section Block Change on T2] 11:27:40,068 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: new current signalmast is null for section T2 (IY:AUTO:0019) - sometimes OK [Allocated Section Block Change on T2] 11:27:40,780 jmri.jmrit.dispatcher.AutoTrainAction DEBUG - Adding TransitSection[IY:AUTO:0002( MainEast )] [AWT-EventQueue-0] 11:27:40,780 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218 / Spur-Bypass CCW:Next Section Expected[true] [AWT-EventQueue-0] 11:27:40,781 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: handleBlockStateChange to OCCUPIED section MainEast (IY:AUTO:0002), block MainEast (IB:AUTO:0002), length 450 [Allocated Section Block Change on MainEast] 11:27:40,782 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: new current signalmast SM-T1TC (IF$shsm:basic:one-low(T1-TC))(Approach) for section MainEast (IY:AUTO:0002) [Allocated Section Block Change on MainEast] 11:27:40,782 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: SM-T1TC (IF$shsm:basic:one-low(T1-TC))(Approach) Medium(50), Dest: SM-T3D (IF$shsm:basic:one-low(T3-D)), path max: 100 [Allocated Section Block Change on MainEast] 11:27:40,782 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: Signal SM-T1TC (IF$shsm:basic:one-low(T1-TC)) setting speed to 50.0 for next [Allocated Section Block Change on MainEast] 11:27:40,782 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: setTargetSpeedValue: Speed[50.0] [Allocated Section Block Change on MainEast] 11:27:40,782 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: setTargetSpeedByProfile: 0.5 SpeedState[50.0] [Allocated Section Block Change on MainEast] 11:27:40,782 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - setTargetSpeed: Set Speed[0.5] adjusted to TargetSpeed[0.5]? [Allocated Section Block Change on MainEast] 11:27:41,712 jmri.jmrit.dispatcher.AutoTrainAction DEBUG - Remove TransitSection[IY:AUTO:0021( Spur )] [AWT-EventQueue-0] 11:27:41,712 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - BR-218: sectionNotRequiredByHeadOnly Stopping at Secion [T2] excluding from length. [Auto Allocator ] 11:27:41,712 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - [BR-218]:Release Section [Spur] by Length allocated [1100] release [1100] train [2296] [Auto Allocator ] 11:27:41,713 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: handleBlockStateChange to UNOCCUPIED - Section Spur (IY:AUTO:0021), Block Spur (IB:AUTO:0004), speed 0.5 [Allocated Section Block Change on Spur] 11:27:42,379 jmri.jmrit.dispatcher.AutoTrainAction DEBUG - Remove TransitSection[IY:AUTO:0019( T2 )] [AWT-EventQueue-0] 11:27:42,379 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - BR-218: sectionNotRequiredByHeadOnly Stopping at Secion [MainEast] excluding from length. [Auto Allocator ] 11:27:42,379 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - [BR-218]:Release Section [Spur] by Length allocated [1250] release [1100] train [2296] [Auto Allocator ] 11:27:42,380 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: handleBlockStateChange to UNOCCUPIED - Section T2 (IY:AUTO:0019), Block T2 (IB:AUTO:0008), speed 0.5 [Allocated Section Block Change on T2] 11:27:43,003 jmri.jmrit.dispatcher.AutoTrainAction DEBUG - Adding TransitSection[IY:AUTO:0018( T1 )] [AWT-EventQueue-0] 11:27:43,003 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218 / Spur-Bypass CCW:Next Section Expected[true] [AWT-EventQueue-0] 11:27:43,004 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - BR-218: sectionNotRequiredByHeadOnly Stopping at Secion [MainEast] excluding from length. [Auto Allocator ] 11:27:43,004 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - [BR-218]:Release Section [Spur] by Length allocated [1250] release [1100] train [2296] [Auto Allocator ] 11:27:43,004 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: handleBlockStateChange to OCCUPIED section T1 (IY:AUTO:0018), block T1 (IB:AUTO:0006), length 150 [Allocated Section Block Change on T1] 11:27:43,004 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: new current signalmast is null for section T1 (IY:AUTO:0018) - sometimes OK [Allocated Section Block Change on T1] 11:27:43,854 jmri.jmrit.dispatcher.AutoTrainAction DEBUG - Adding TransitSection[IY:AUTO:0003( Bypass )] [AWT-EventQueue-0] 11:27:43,854 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218 / Spur-Bypass CCW:Next Section Expected[false] [AWT-EventQueue-0] 11:27:43,855 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - BR-218: sectionNotRequiredByHeadOnly Stopping at Secion [MainEast] excluding from length. [Auto Allocator ] 11:27:43,855 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - [BR-218]:Release Section [Spur] by Length allocated [1250] release [1100] train [2296] [Auto Allocator ] 11:27:43,855 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: handleBlockStateChange to OCCUPIED section Bypass (IY:AUTO:0003), block Bypass (IB:AUTO:0001), length 2000 [Allocated Section Block Change on Bypass] 11:27:43,855 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: Trip end, stop in Current Section, Block= Bypass (IB:AUTO:0001) [Allocated Section Block Change on Bypass] 11:27:43,855 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: StopInCurrentSection called for Bypass (IY:AUTO:0003) task[4] targetspeed[0.5] [Allocated Section Block Change on Bypass] 11:27:43,855 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: Section [Bypass (IY:AUTO:0003)] Section Length[2000] Max Train Length [2296] StopBySpeedProfile [true]. setStopNow [Allocated Section Block Change on Bypass] 11:27:43,855 mri.jmrit.dispatcher.AllocatedSection DEBUG - Remaining length in section[Bypass] is [2000.0] [Allocated Section Block Change on Bypass] 11:27:43,856 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - Set Target Speed[0.0] with distance{2000.0] from speed[0.5] [Allocated Section Block Change on Bypass] 11:27:43,926 jmri.jmrit.dispatcher.AutoTrainAction DEBUG - Remove TransitSection[IY:AUTO:0002( MainEast )] [AWT-EventQueue-0] 11:27:43,926 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - BR-218: sectionNotRequiredByHeadOnly Stopping at Secion [T1] excluding from length. [Auto Allocator ] 11:27:43,926 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - [BR-218]:Release Section [Spur] by Length allocated [1700] release [1100] train [2296] [Auto Allocator ] 11:27:43,927 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: handleBlockStateChange to UNOCCUPIED - Section MainEast (IY:AUTO:0002), Block MainEast (IB:AUTO:0002), speed 0.0 [Allocated Section Block Change on MainEast] 11:27:45,624 jmri.jmrit.dispatcher.AutoTrainAction DEBUG - Remove TransitSection[IY:AUTO:0018( T1 )] [AWT-EventQueue-0] 11:27:45,624 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - BR-218: sectionNotRequiredByHeadOnly Stopping at Secion [Bypass] excluding from length. [Auto Allocator ] 11:27:45,625 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - [BR-218]:Release Section [Spur] by Length allocated [1850] release [1100] train [2296] [Auto Allocator ] 11:27:45,625 jmri.jmrit.dispatcher.AutoActiveTrain DEBUG - BR-218: handleBlockStateChange to UNOCCUPIED - Section T1 (IY:AUTO:0018), Block T1 (IB:AUTO:0006), speed 0.0 [Allocated Section Block Change on T1] 11:27:58,560 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - BR-218: sectionNotRequiredByHeadOnly Stopping at Secion [Bypass] including in length. [Auto Allocator ] 11:27:58,560 jmri.jmrit.dispatcher.AutoTrainsFrame DEBUG - NewStatus[64] [Wait for stop BR-218 / Spur-Bypass CCW] 11:27:58,560 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - [BR-218]:Release Section [Spur] by Length allocated [3850] release [1100] train [2296] [Auto Allocator ] 11:27:58,560 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - BR-218: releasing section [Spur (IY:AUTO:0021)] [Auto Allocator ] 11:27:58,564 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - BR-218: sectionNotRequiredByHeadOnly Stopping at Secion [Bypass] including in length. [Auto Allocator ] 11:27:58,564 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - [BR-218]:Release Section [T2] by Length allocated [2750] release [150] train [2296] [Auto Allocator ] 11:27:58,564 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - BR-218: releasing section [T2 (IY:AUTO:0019)] [Auto Allocator ] 11:27:58,566 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - BR-218: sectionNotRequiredByHeadOnly Stopping at Secion [Bypass] including in length. [Auto Allocator ] 11:27:58,567 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - [BR-218]:Release Section [MainEast] by Length allocated [2600] release [450] train [2296] [Auto Allocator ] 11:27:58,567 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - BR-218: sectionNotRequiredByHeadOnly Stopping at Secion [Bypass] including in length. [Auto Allocator ] 11:27:58,567 jmri.jmrit.dispatcher.DispatcherFrame DEBUG - [BR-218]:Release Section [MainEast] by Length allocated [2600] release [450] train [2296] [Auto Allocator ] 11:27:58,572 jmri.jmrit.dispatcher.ActiveTrain???? ERROR - Attempt to remove an unallocated Section T2 (IY:AUTO:0019) [Auto Allocator ] JeanLouisDelestre@... De: "Steve_G via groups.io" <RailRodder22@...> ?: [email protected] 贰苍惫辞测é: Jeudi 10 Avril 2025 23:50:45 Objet: Re: [jmriusers] Chaining transits with a different locomotive #dispatcher Jean
See if there's anything in the logs. Also, in the debug menu you can up the logging level of the dispatcher to debug or trace.?
See if it's waiting on an allocation, or signal. The signal issue can be easily checked by running dispatcher with the no signals option.
Does it work if using a simulated connection?
Steve G.
?
?
-- ---------------------------------------------
Jean-Louis Paris-France
---------------------------------------------
JRMI 5.9.5 on Windows
DCC EX? on Arduino Mega
Java version 17.1.12
? |
|
Re: Virtual Signal Masts for End-Blocks
All my spurs are terminated with virtual dwarf masts. All are set to stop and saved. My SML is auto-generated. The mast at the turnout throat rightly displays approach when the turnout is aligned to the ?spur.
--
Ken NYNH&H, Old Colony Division, Cape Cod Branch (1949-1959) Loconet * JMRI 5.11.4 * OSX,Win10,Ubuntu Blog: ?
Youtube:
|
|
Re: Difference Between Compare and Reset
#decoderpro
Did you do the slot monitor test mentioned above?
You did not actually mention which DCC system you are using. From one of your replies, seems to be a Digitraxx system.
Clearing the slots with Slot monitor (or Op switches) can fix lots of issues.
?
One way to find the exact cause:
1, do the reset.
2, do write full sheet for each tab, testing after each tab.
You can then tell which tab has the bad CV setting.
If it is the basic page with long and short addresses, then the CS may be the issue (Slots).
--
--- Thomas DeSoto, TX |
|
Re: Virtual Signal Masts for End-Blocks
Which signal system are you using for the signal masts? ?Have you created the signal mast logic (SML) from Signal-A to Virtual-A? Dave Sand ----- Original message ----- From:?trevor@... Subject: [jmriusers] Virtual Signal Masts for End-Blocks Date: Thursday, April 10, 2025 9:21 PM Running JMRI 5.11 and have created a number of Signal Masts, each using DCC Signal Heads (I use NCE Light-Its). I am wondering if I have setup something wrong, or if someone can some provide some guidance on the following situation.? ? I have a turnout which either continues the mainline, or if thrown diverges to an end track. I setup two rules for my signal mast (Signal-A). The first from Signal-A to Signal-B (both on the mainline) and based on the turnout being set to Closed.? ? For the second rule, it is Signal-A to Virtual-A where the turnout is Thrown.? ? Virtual-A is defined as a Virtual Signal Mast as it is at the end of a track line. However, Signal-A is always at a Stop state because Virtual-A is never set to a state unless I manually set it to Clear. When I do this, and if the Turnout is Thrown, then Signal-A correctly changes to Clear. But otherwise Signal-A is not in the correct state because it is linked to Virtual-A and Virtual- is unset.? ? Am I using the Virtual Signal in the right way for these situations where the track ends?? |
|
Signal Mast Logic Translation Latency
#sml
Over the past few weeks we have started running into a long latency issue between the signal mast logic and the turnouts that controls each LED. We are using a Digitrax system with a CMRI network for Signals and Turnouts. Our network consists of about 17 CPNODES at the moment with a few more later to come. We have just over 100 Signal Masts with about 75%~80% of them in working order. In recent weeks as we continue to expand our CMRI network I started noticing an issue where the nodes are polling correctly with zero errors but signal aspects change slower than usual. With times where the change is so long the signals just give impossible aspects at times. Now the interesting part is our turnouts are on the same network as the signals and have no issues even while the issue is present on the signals. Directly changing the outputs using the turnouts table works just fine for changing the individual outputs, but changing the signal aspect from the mast table will choke up and take anywhere from seconds to several minutes to change. The issue seems to be most prevalent on startup, and waiting 5-10 minutes before running will get the choke out, but if the system is under heavier load such as 5+ trains usually it will start to choke up again. I am convinced it does not have to do with the CMRI network as I get the same result running the layout in simulation at home on a very powerful computer.?
Any help on this issue would be much appreciated Thanks,
- Hunter Shelby? |
|
Virtual Signal Masts for End-Blocks
Running JMRI 5.11 and have created a number of Signal Masts, each using DCC Signal Heads (I use NCE Light-Its). I am wondering if I have setup something wrong, or if someone can some provide some guidance on the following situation.?
?
I have a turnout which either continues the mainline, or if thrown diverges to an end track. I setup two rules for my signal mast (Signal-A). The first from Signal-A to Signal-B (both on the mainline) and based on the turnout being set to Closed.?
?
For the second rule, it is Signal-A to Virtual-A where the turnout is Thrown.?
?
Virtual-A is defined as a Virtual Signal Mast as it is at the end of a track line. However, Signal-A is always at a Stop state because Virtual-A is never set to a state unless I manually set it to Clear. When I do this, and if the Turnout is Thrown, then Signal-A correctly changes to Clear. But otherwise Signal-A is not in the correct state because it is linked to Virtual-A and Virtual- is unset.?
?
Am I using the Virtual Signal in the right way for these situations where the track ends?? |
|
Re: DecoderPro no loco roster
#roster
No just the original JMRI that came on the program for learning.?
--
Mike Swederska Meramec Valley Lines Modeling Mopac equipment in 3/16 |
|
Re: Startup Gets Stuck
#startup
Sounds like a java issue. My Win11 laptop required java 21 to run JMRI 5.4 version last year. Good luck Sincerely, Vincent Marino Vincent Marino On Thu, Apr 10, 2025, 8:56 PM rprdds24 via <rprdds24=[email protected]> wrote:
|
|
Startup Gets Stuck
#startup
Recently it became necessary to reinstall Java and JMRI. First, I checked that both programs were uninstalled. I then installed Java? Version 8 Update 441 and JMRI Version 4.26+R381. Both were problem free installs. I then tried to start JMRI so I could load my roster. The Java icon and the DecoderPro icon appeared in the taskbar and the small JMRI splash screen appeared in the middle of my screen. That's as far as the startup got. I've listed my equipment below. What am I missing? I'd appreciate any help in getting started.?
--
Richard Richter
?
Dell Lattude 3190 2-in-1 Laptop Computer
Microsoft Windows? 11 Pro
RR-CirKits LocoBuffer-NG Rev-a
Digitrax ZephyrXtra DCS 51 Command Station |
|
Re: DecoderPro no loco roster
#roster
Mike,
?
Recreating your roster index shouldn't eliminate the operations part of JMRI.? Something else happened.? Do you have more than one profile?
?
Dan |
|
Re: DecoderPro no loco roster
#roster
I am lost as to why I cannot access my railroad in operation pro. I have been using the switch list almost every day to operate sine 2022. Evrything was fine tuned to fit the railroad. And yesterday after fixing the loco roster in decoder pro the railroad name is showing active without the information of the railroad.?
Do I give up and find another way of creating switch list to operate my railroad??
--
Mike Swederska Meramec Valley Lines Modeling Mopac equipment in 3/16 |
|
Re: jmri 5.10 automation no longer functions
Tony, Warrants have never been in Tools -> Tables. ?You might be thinking of Warrants entry in Preferences. Dave Sand ----- Original message ----- From: AD <bklyns_baseball_club@...> Subject: Re: [jmriusers] jmri 5.10 automation no longer functions Date: Thursday, April 10, 2025 5:13 PM Bxp88’s always powered from the output of a PSX breaker with all 5 breakers getting power from track output of command center. Can anyone tell me what happened to the last table that use to be part of the list of tables Thank you Tony
|
|
Re: jmri 5.10 automation no longer functions
开云体育Any info on how to find any other variables controlling speed during automation.The engines ,3 of them, ?dont run very fast even at 100% speed by ?throttle but the automation is running them at a hardly moving speed when i set speed to max in blocks and 200% in creation. ?Thus they stop when going over switches as they have no momentum to get them past the 1.5 inch throwing mechanism which does not have power. Tony On Apr 10, 2025, at 1:42?PM, AD <bklyns_baseball_club@...> wrote:
|
Bob Jacobsen
Ken Heywood
to navigate to use esc to dismiss