开云体育

Peter,? If you plan to eventually use the Engine Driver app on an Android smartphone, then you can force ED to use the default function labels. Those defaults in turn can be set/changed on each

There is a memory field in the lower left wher you type BCT in the memory field below and push the sensor button above the memory field. That makes the panel to be in local mode and the panel sensors

Benny, Thanks for the added files. The panel xml file now loads without any errors. The 40 to U2 appears to be a NX problem. The 31 to 33 turnout issue applies to both NX and signal mast logic.

Ken: ?I was able to get rid of the ones that had to do with the switches "SW??" but the ones that have to do with the yellow aspects I am having trouble with. PJ

PJ, There are a number of odd turnout numbers that don't match the single node. Examples include: CS412 and CS436 Any CT above CT203, like CT1904, CT321, CT323, CT324, CT329, CT606, CT609, CT610,

Hi! I'm sorry, I forgot to add this. It is hitting the motor during programming. It cheeps at every write. Now, it seems to be programming even with the 308 error. I put it on my layout, select it,

Dave:? I was able to eliminate the SW's but the ones that control Yellow Signals I haven't figured how to eliminate.? PJ

George, I have never heard of an "automatic sensor”. There is an option in Layout Editor to create "automatic blocks”. I have not, and never will, use that option. In my opinion it creates

I have ziped it now. /Benny Den l?r 1 sep. 2018 kl 18:57 skrev Dave Sand <ds@...>:

Dave: ? The file is uploaded "RVR 8-2018-3" PJ

Hi Allen Things to check. Start DecoderPro. Edit->preferences->Connection->Loconet tab.?? ? ? System Connection: "Loconet PR3" ? ? Command Station type: "PR3 standalone

How do I know what an automatic sensor is used for? I have a lot of automatic sensors that were placed when I had to edit the track on the layout, but I do not know what they are used for or where

Benny, I am also going to need the custom components located in the resources folder, and maybe the jython folder. These are located in the same directory as the panel xml file. It works best if

Hi Wouter, Thank you. I will try it. Gordon

OOPs I forgot to say I have plenty of room in my hard drive. More than 350 gig free. George

Hi Dan I have several folders under JMRI that have my layout in them. I am trying to clean up the folders that contain my layouts by getting rid of some of the layouts that are old and not used any

The xml file and the picture are uploaded now. /Benny Den l?r 1 sep. 2018 kl 18:13 skrev Dave Sand <ds@...>:

PJ, The "console window" is at Help >> System Console. I looked at your latest debug upload. Bob has already mentioned some of the errors. It appears that you have an internal turnout with the

Dave, Your a Genius, I think you nailed it in your reply, thank you, thank you, thank you. As I read through your thoughtful and educational reply I can only appreciate you taking the time to sort

Benny, Attachments are removed from postings. You will need to upload your picture to the photos section. It would also be helpful if you could upload the panel xml file to the