Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
- Jmriusers
- Messages
Search
|
Locked
Re: Roco Zimo decoder question
Hi
It should not matter which Zimo small scale sound decoder it is, they should all behave the same re mapping. It all depends which socket you have in the loco as to which decoder is fitted:- PluX-22 - MX645 most likely in new H0 locos. PluX-16 - MX648 most likely but could be MX645, MTC-21 - MX644, Next-18S - MX658 NEM651 6-pin - MX649, NEM652 8-pin - Could be anything! Be sure to read the CVs from the decoder before changing the relavent CVs and just writing the changes because some CVs determine the decoder type (I believe it is possible to turn a MX644C in to an MX644D and vice versa just by changing CVs!) Suzie x |
|
Locked
Re: Slot monitor is blank
Terry,
Are you referring to LocoNet Slot Monitor? If so, what do you mean by "all tabs"? There aren't any "tabs", at least "tabs" as I know them. What command station? If DCS240, are you using "expanded slots"? JMRI does not understand expanded slots, and will not display them. Regards, Billybob - Remember: providing the information requested in "How to ask your question" can expedite the solution to your question. |
|
Locked
Re: Roco Zimo decoder question
Thomas, in JMRI click on identify which should give you the address after that you should be able to read the decoder type. I don't have JMRI near me to give you the exact steps but you can see what you need what you need to do.
toggle quoted message
Show quoted text
Al Babinsky Sent from Alto On Saturday, August 12, 2017 at 16:21 thomas_applink <jmriusers@...> wrote:
? My nice new Roco BR85 comes with a Zimo decoder. JMRI has a long list of decoders to select from. I have no idea which decoder in in the Lok. And the Roco documentation just says "sound decoder". SO which do I select? What I actually need to do so map the smoke function off of function 2, as all US DCC systems have F2 as horn/whistle, and it does not latch on. (momentary) As an alternative, how do I set F2 as not momentary in the throttle for this Lok? (It was there in a past version, but I cannot find it now) Whistle on this Lok is F3 and F4. This would be with WII Throttle and Engine Driver. Note that 95% of My Loks are Loksound and Tsunami (of some flavor) and this is my first Zimo. Thanks. Thomas DeSoto, TX P.S., the Lok runs great. Just that weird function mapping! [Non-text portions of this message have been removed] #AOLMsgPart_2_8627a730-d68c-44b5-b62a-3cdf179a3415 td{color: black;} .aolReplacedBody #aolmail_ygrp-mkp { border: 1px solid #d8d8d8; font-family: Arial; margin: 10px 0; padding: 0 10px;}.aolReplacedBody #aolmail_ygrp-mkp hr { border: 1px solid #d8d8d8;}.aolReplacedBody #aolmail_ygrp-mkp #aolmail_hd { color: #628c2a; font-size: 85%; font-weight: 700; line-height: 122%; margin: 10px 0;}.aolReplacedBody #aolmail_ygrp-mkp #aolmail_ads { margin-bottom: 10px;}.aolReplacedBody #aolmail_ygrp-mkp .aolmail_ad { padding: 0 0;}.aolReplacedBody #aolmail_ygrp-mkp .aolmail_ad p { margin: 0;}.aolReplacedBody #aolmail_ygrp-mkp .aolmail_ad a { color: #0000ff; text-decoration: none;} .aolReplacedBody #aolmail_ygrp-sponsor #aolmail_ygrp-lc { font-family: Arial;}.aolReplacedBody #aolmail_ygrp-sponsor #aolmail_ygrp-lc #aolmail_hd { margin: 10px 0px; font-weight: 700; font-size: 78%; line-height: 122%;}.aolReplacedBody #aolmail_ygrp-sponsor #aolmail_ygrp-lc .aolmail_ad { margin-bottom: 10px; padding: 0 0;} .aolReplacedBody #aolmail_actions { font-family: Verdana; font-size: 11px; padding: 10px 0; } .aolReplacedBody #aolmail_activity { background-color: #e0ecee; float: left; font-family: Verdana; font-size: 10px; padding: 10px; } .aolReplacedBody #aolmail_activity span { font-weight: 700; } .aolReplacedBody #aolmail_activity span:first-child { text-transform: uppercase; } .aolReplacedBody #aolmail_activity span a { color: #5085b6; text-decoration: none; } .aolReplacedBody #aolmail_activity span span { color: #ff7900; } .aolReplacedBody #aolmail_activity span .aolmail_underline { text-decoration: underline; } .aolReplacedBody .aolmail_attach { clear: both; display: table; font-family: Arial; font-size: 12px; padding: 10px 0; width: 400px; } .aolReplacedBody .aolmail_attach div a { text-decoration: none; } .aolReplacedBody .aolmail_attach img { border: none; padding-right: 5px; } .aolReplacedBody .aolmail_attach label { display: block; margin-bottom: 5px; } .aolReplacedBody .aolmail_attach label a { text-decoration: none; } .aolReplacedBody blockquote { margin: 0 0 0 4px; } .aolReplacedBody .aolmail_bold { font-family: Arial; font-size: 13px; font-weight: 700; } .aolReplacedBody .aolmail_bold a { text-decoration: none; } .aolReplacedBody dd.aolmail_last p a { font-family: Verdana; font-weight: 700; } .aolReplacedBody dd.aolmail_last p span { margin-right: 10px; font-family: Verdana; font-weight: 700; } .aolReplacedBody dd.aolmail_last p span.aolmail_yshortcuts { margin-right: 0; } .aolReplacedBody div.aolmail_attach-table div div a { text-decoration: none; } .aolReplacedBody div.aolmail_attach-table { width: 400px; } .aolReplacedBody div.aolmail_file-title a,.aolReplacedBody div.aolmail_file-title a:active,.aolReplacedBody div.aolmail_file-title a:hover,.aolReplacedBody div.aolmail_file-title a:visited { text-decoration: none; } .aolReplacedBody div.aolmail_photo-title a,.aolReplacedBody div.aolmail_photo-title a:active,.aolReplacedBody div.aolmail_photo-title a:hover,.aolReplacedBody div.aolmail_photo-title a:visited { text-decoration: none; } .aolReplacedBody div#aolmail_ygrp-mlmsg #aolmail_ygrp-msg p a span.aolmail_yshortcuts { font-family: Verdana; font-size: 10px; font-weight: normal; } .aolReplacedBody .aolmail_green { color: #628c2a; } .aolReplacedBody .aolmail_MsoNormal { margin: 0 0 0 0; } .aolReplacedBody o { font-size: 0; } .aolReplacedBody #aolmail_photos div { float: left; width: 72px; } .aolReplacedBody #aolmail_photos div div { border: 1px solid #666666; height: 62px; overflow: hidden; width: 62px; } .aolReplacedBody #aolmail_photos div label { color: #666666; font-size: 10px; overflow: hidden; text-align: center; white-space: nowrap; width: 64px; } .aolReplacedBody #aolmail_reco-category { font-size: 77%; } .aolReplacedBody #aolmail_reco-desc { font-size: 77%; } .aolReplacedBody .aolmail_replbq { margin: 4px; } .aolReplacedBody #aolmail_ygrp-actbar div a:first-child { margin-right: 2px; padding-right: 5px; } .aolReplacedBody #aolmail_ygrp-mlmsg { font-size: 13px; font-family: Arial, helvetica,clean, sans-serif; *font-size: small; *font: x-small; } .aolReplacedBody #aolmail_ygrp-mlmsg table { font-size: inherit; font: 100%; } .aolReplacedBody #aolmail_ygrp-mlmsg select,.aolReplacedBody input,.aolReplacedBody textarea { font: 99% Arial, Helvetica, clean, sans-serif; } .aolReplacedBody #aolmail_ygrp-mlmsg pre,.aolReplacedBody code { font:115% monospace; *font-size:100%; } .aolReplacedBody #aolmail_ygrp-mlmsg * { line-height: 1.22em; } .aolReplacedBody #aolmail_ygrp-mlmsg #aolmail_logo { padding-bottom: 10px; } .aolReplacedBody #aolmail_ygrp-msg p a { font-family: Verdana; } .aolReplacedBody #aolmail_ygrp-msg p#aolmail_attach-count span { color: #1E66AE; font-weight: 700; } .aolReplacedBody #aolmail_ygrp-reco #aolmail_reco-head { color: #ff7900; font-weight: 700; } .aolReplacedBody #aolmail_ygrp-reco { margin-bottom: 20px; padding: 0px; } .aolReplacedBody #aolmail_ygrp-sponsor #aolmail_ov li a { font-size: 130%; text-decoration: none; } .aolReplacedBody #aolmail_ygrp-sponsor #aolmail_ov li { font-size: 77%; list-style-type: square; padding: 6px 0; } .aolReplacedBody #aolmail_ygrp-sponsor #aolmail_ov ul { margin: 0; padding: 0 0 0 8px; } .aolReplacedBody #aolmail_ygrp-text { font-family: Georgia; } .aolReplacedBody #aolmail_ygrp-text p { margin: 0 0 1em 0; } .aolReplacedBody #aolmail_ygrp-text tt { font-size: 120%; } .aolReplacedBody #aolmail_ygrp-vital ul li:last-child { border-right: none !important; } [Non-text portions of this message have been removed] |
|
Locked
Roco Zimo decoder question
My nice new Roco BR85 comes with a Zimo decoder.
JMRI has a long list of decoders to select from. I have no idea which decoder in in the Lok. And the Roco documentation just says "sound decoder". SO which do I select? What I actually need to do so map the smoke function off of function 2, as all US DCC systems have F2 as horn/whistle, and it does not latch on. (momentary) As an alternative, how do I set F2 as not momentary in the throttle for this Lok? (It was there in a past version, but I cannot find it now) Whistle on this Lok is F3 and F4. This would be with WII Throttle and Engine Driver. Note that 95% of My Loks are Loksound and Tsunami (of some flavor) and this is my first Zimo. Thanks. Thomas DeSoto, TX P.S., the Lok runs great. Just that weird function mapping! |
|
Locked
Re: connection
Jon Miller
/On 8/12/2017 1:02 PM, Nick Kulp cornwall9@... [jmriusers] wrote://
/ /it was the very FIRST Loco buffer designed by the originalWell I guess 20+ years is good usage. Probably should get something new. Am thinking about doing that. -- Jon Miller For me time stopped in 1941 Digitrax Chief/Zephyr systems, JMRI User NMRA Life member #2623 Member SFRH&MS |
|
Locked
Re: connection
Nick Kulp
Jon,
Yep, you and I and hundreds more bought and built these. When Digitrax came out with their horrible PR1 with no software to use, it was the very FIRST Loco buffer designed by the original "Loconet-Hackers" group way before yahoo groups . The large 25-pin serial connector was part of current technology back then. Most of us had 25-9-pin adapters for the comm ports. It required a separate power supply and you could even add on I/O boards for signaling. The CMOS chip could be programmed for outputs or inputs but the software was either COBOL or DOS-based Basic . If you are using it with a USB / serial converter that is probably where W7 is looking for a driver. I still used mine with Windows 7 at my old workbench. It will work fine if you get a new converter. When rr-cirkits took over with the Locobuffer II, they became "rare and collectible" . I still have the schematics and instructions if you need copies. Thanks for the walk down Memory Lane,Nick Kulp ?"Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes...Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than to prevent homicides, for an unarmed man may be attacked with greater confidence than an armed man." -Thomas Jefferson ? ? Found the PC board at . I may have built this, don't remember. -- Jon Miller For me time stopped in 1941 Digitrax? Chief/Zephyr systems, JMRI User NMRA Life member #2623 Member SFRH&MS [Non-text portions of this message have been removed] |
|
Locked
Re: UPgrade to 4.8
This is a typical symptom of an antivirus program quarantining LaunchJMRI.exe on Windows.
toggle quoted message
Show quoted text
-- Dave in Australia On 13 Aug 2017, at 4:30 AM, Bob Jacobsen jacobsen@... [jmriusers] <jmriusers@...> wrote:On Aug 12, 2017, at 6:56 AM, Gary Heimerl red16lund@... [jmriusers] <jmriusers@...> wrote:You have to find out why the JMRI installer isn¡¯t able to put the LaunchJMRI.exe file into the C:/program files (x86)\JMRI directory. It¡¯s not going to work until that problem is solved. |
|
Locked
Re: UPgrade to 4.8
On Aug 12, 2017, at 6:56 AM, Gary Heimerl red16lund@... [jmriusers] <jmriusers@...> wrote:You have to find out why the JMRI installer isn¡¯t able to put the LaunchJMRI.exe file into the C:/program files (x86)\JMRI directory. It¡¯s not going to work until that problem is solved. I¡¯m not a Windows expert, so can only make vague suggestions. Is there perhaps a permissions problem for that directory? Is there an anti-virus program that¡¯s keeping you from changing it? Bob -- Bob Jacobsen jacobsen@... +1-510-708-5988 AIM, Skype JacobsenRG |
|
Locked
Re: UPgrade to 4.8
Walt,I did check to make sure JMRI isn't running as you suggested. I continue to have the same problems I listed above. Thanks so much for your time.?Is there anything else I can do?
toggle quoted message
Show quoted text
Gary On Saturday, August 12, 2017 10:21 AM, "walter.stanley.thompson.3@... [jmriusers]" <jmriusers@...> wrote:
? Gary: JMRI can not be running when you do the upgrade. I dup you problem by having JMRI running and trying to install the upgrade. Walt [Non-text portions of this message have been removed] #yiv3644766915 #yiv3644766915 -- #yiv3644766915ygrp-mkp {border:1px solid #d8d8d8;font-family:Arial;margin:10px 0;padding:0 10px;}#yiv3644766915 #yiv3644766915ygrp-mkp hr {border:1px solid #d8d8d8;}#yiv3644766915 #yiv3644766915ygrp-mkp #yiv3644766915hd {color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px 0;}#yiv3644766915 #yiv3644766915ygrp-mkp #yiv3644766915ads {margin-bottom:10px;}#yiv3644766915 #yiv3644766915ygrp-mkp .yiv3644766915ad {padding:0 0;}#yiv3644766915 #yiv3644766915ygrp-mkp .yiv3644766915ad p {margin:0;}#yiv3644766915 #yiv3644766915ygrp-mkp .yiv3644766915ad a {color:#0000ff;text-decoration:none;}#yiv3644766915 #yiv3644766915ygrp-sponsor #yiv3644766915ygrp-lc {font-family:Arial;}#yiv3644766915 #yiv3644766915ygrp-sponsor #yiv3644766915ygrp-lc #yiv3644766915hd {margin:10px 0px;font-weight:700;font-size:78%;line-height:122%;}#yiv3644766915 #yiv3644766915ygrp-sponsor #yiv3644766915ygrp-lc .yiv3644766915ad {margin-bottom:10px;padding:0 0;}#yiv3644766915 #yiv3644766915actions {font-family:Verdana;font-size:11px;padding:10px 0;}#yiv3644766915 #yiv3644766915activity {background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;}#yiv3644766915 #yiv3644766915activity span {font-weight:700;}#yiv3644766915 #yiv3644766915activity span:first-child {text-transform:uppercase;}#yiv3644766915 #yiv3644766915activity span a {color:#5085b6;text-decoration:none;}#yiv3644766915 #yiv3644766915activity span span {color:#ff7900;}#yiv3644766915 #yiv3644766915activity span .yiv3644766915underline {text-decoration:underline;}#yiv3644766915 .yiv3644766915attach {clear:both;display:table;font-family:Arial;font-size:12px;padding:10px 0;width:400px;}#yiv3644766915 .yiv3644766915attach div a {text-decoration:none;}#yiv3644766915 .yiv3644766915attach img {border:none;padding-right:5px;}#yiv3644766915 .yiv3644766915attach label {display:block;margin-bottom:5px;}#yiv3644766915 .yiv3644766915attach label a {text-decoration:none;}#yiv3644766915 blockquote {margin:0 0 0 4px;}#yiv3644766915 .yiv3644766915bold {font-family:Arial;font-size:13px;font-weight:700;}#yiv3644766915 .yiv3644766915bold a {text-decoration:none;}#yiv3644766915 dd.yiv3644766915last p a {font-family:Verdana;font-weight:700;}#yiv3644766915 dd.yiv3644766915last p span {margin-right:10px;font-family:Verdana;font-weight:700;}#yiv3644766915 dd.yiv3644766915last p span.yiv3644766915yshortcuts {margin-right:0;}#yiv3644766915 div.yiv3644766915attach-table div div a {text-decoration:none;}#yiv3644766915 div.yiv3644766915attach-table {width:400px;}#yiv3644766915 div.yiv3644766915file-title a, #yiv3644766915 div.yiv3644766915file-title a:active, #yiv3644766915 div.yiv3644766915file-title a:hover, #yiv3644766915 div.yiv3644766915file-title a:visited {text-decoration:none;}#yiv3644766915 div.yiv3644766915photo-title a, #yiv3644766915 div.yiv3644766915photo-title a:active, #yiv3644766915 div.yiv3644766915photo-title a:hover, #yiv3644766915 div.yiv3644766915photo-title a:visited {text-decoration:none;}#yiv3644766915 div#yiv3644766915ygrp-mlmsg #yiv3644766915ygrp-msg p a span.yiv3644766915yshortcuts {font-family:Verdana;font-size:10px;font-weight:normal;}#yiv3644766915 .yiv3644766915green {color:#628c2a;}#yiv3644766915 .yiv3644766915MsoNormal {margin:0 0 0 0;}#yiv3644766915 o {font-size:0;}#yiv3644766915 #yiv3644766915photos div {float:left;width:72px;}#yiv3644766915 #yiv3644766915photos div div {border:1px solid #666666;min-height:62px;overflow:hidden;width:62px;}#yiv3644766915 #yiv3644766915photos div label {color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;}#yiv3644766915 #yiv3644766915reco-category {font-size:77%;}#yiv3644766915 #yiv3644766915reco-desc {font-size:77%;}#yiv3644766915 .yiv3644766915replbq {margin:4px;}#yiv3644766915 #yiv3644766915ygrp-actbar div a:first-child {margin-right:2px;padding-right:5px;}#yiv3644766915 #yiv3644766915ygrp-mlmsg {font-size:13px;font-family:Arial, helvetica, clean, sans-serif;}#yiv3644766915 #yiv3644766915ygrp-mlmsg table {font-size:inherit;font:100%;}#yiv3644766915 #yiv3644766915ygrp-mlmsg select, #yiv3644766915 input, #yiv3644766915 textarea {font:99% Arial, Helvetica, clean, sans-serif;}#yiv3644766915 #yiv3644766915ygrp-mlmsg pre, #yiv3644766915 code {font:115% monospace;}#yiv3644766915 #yiv3644766915ygrp-mlmsg * {line-height:1.22em;}#yiv3644766915 #yiv3644766915ygrp-mlmsg #yiv3644766915logo {padding-bottom:10px;}#yiv3644766915 #yiv3644766915ygrp-msg p a {font-family:Verdana;}#yiv3644766915 #yiv3644766915ygrp-msg p#yiv3644766915attach-count span {color:#1E66AE;font-weight:700;}#yiv3644766915 #yiv3644766915ygrp-reco #yiv3644766915reco-head {color:#ff7900;font-weight:700;}#yiv3644766915 #yiv3644766915ygrp-reco {margin-bottom:20px;padding:0px;}#yiv3644766915 #yiv3644766915ygrp-sponsor #yiv3644766915ov li a {font-size:130%;text-decoration:none;}#yiv3644766915 #yiv3644766915ygrp-sponsor #yiv3644766915ov li {font-size:77%;list-style-type:square;padding:6px 0;}#yiv3644766915 #yiv3644766915ygrp-sponsor #yiv3644766915ov ul {margin:0;padding:0 0 0 8px;}#yiv3644766915 #yiv3644766915ygrp-text {font-family:Georgia;}#yiv3644766915 #yiv3644766915ygrp-text p {margin:0 0 1em 0;}#yiv3644766915 #yiv3644766915ygrp-text tt {font-size:120%;}#yiv3644766915 #yiv3644766915ygrp-vital ul li:last-child {border-right:none !important;}#yiv3644766915 [Non-text portions of this message have been removed] |
|
Locked
(No subject)
Is the connection not happening, or does it show as connected and you can't control anything? The reason I ask is I had a problem where it would connect, but I couldn't control my locos. In the preferences section there is a tab for default. Under this tab you will see which system controls different parts of your system. My throttle control had been switched to internal instead of NCE.
|
|
Locked
(No subject)
Sharpy
I have been reading up on other interfaces and I am reasonable sure the problem is the interface. ?Thank you for your time. ?I ordered a DIGITRAX PC3 XTRA today. ?I think this will do what I want to do.
From: "walter.stanley.thompson.3@... [jmriusers]" <jmriusers@...> To: jmriusers@... Sent: Saturday, August 12, 2017 1:10 AM Subject: [jmriusers] Re: ? Sharpy We assume you are using a windows system. Is that correct? If windows open the JMRI program folder and run the install test. Let us know the results. More info would help you . What is theinterface you are using, What is the MRC command station type, How do you have the connection preferences set up. Walt #yiv4391248911 #yiv4391248911 -- #yiv4391248911ygrp-mkp {border:1px solid #d8d8d8;font-family:Arial;margin:10px 0;padding:0 10px;}#yiv4391248911 #yiv4391248911ygrp-mkp hr {border:1px solid #d8d8d8;}#yiv4391248911 #yiv4391248911ygrp-mkp #yiv4391248911hd {color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px 0;}#yiv4391248911 #yiv4391248911ygrp-mkp #yiv4391248911ads {margin-bottom:10px;}#yiv4391248911 #yiv4391248911ygrp-mkp .yiv4391248911ad {padding:0 0;}#yiv4391248911 #yiv4391248911ygrp-mkp .yiv4391248911ad p {margin:0;}#yiv4391248911 #yiv4391248911ygrp-mkp .yiv4391248911ad a {color:#0000ff;text-decoration:none;}#yiv4391248911 #yiv4391248911ygrp-sponsor #yiv4391248911ygrp-lc {font-family:Arial;}#yiv4391248911 #yiv4391248911ygrp-sponsor #yiv4391248911ygrp-lc #yiv4391248911hd {margin:10px 0px;font-weight:700;font-size:78%;line-height:122%;}#yiv4391248911 #yiv4391248911ygrp-sponsor #yiv4391248911ygrp-lc .yiv4391248911ad {margin-bottom:10px;padding:0 0;}#yiv4391248911 #yiv4391248911actions {font-family:Verdana;font-size:11px;padding:10px 0;}#yiv4391248911 #yiv4391248911activity {background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;}#yiv4391248911 #yiv4391248911activity span {font-weight:700;}#yiv4391248911 #yiv4391248911activity span:first-child {text-transform:uppercase;}#yiv4391248911 #yiv4391248911activity span a {color:#5085b6;text-decoration:none;}#yiv4391248911 #yiv4391248911activity span span {color:#ff7900;}#yiv4391248911 #yiv4391248911activity span .yiv4391248911underline {text-decoration:underline;}#yiv4391248911 .yiv4391248911attach {clear:both;display:table;font-family:Arial;font-size:12px;padding:10px 0;width:400px;}#yiv4391248911 .yiv4391248911attach div a {text-decoration:none;}#yiv4391248911 .yiv4391248911attach img {border:none;padding-right:5px;}#yiv4391248911 .yiv4391248911attach label {display:block;margin-bottom:5px;}#yiv4391248911 .yiv4391248911attach label a {text-decoration:none;}#yiv4391248911 blockquote {margin:0 0 0 4px;}#yiv4391248911 .yiv4391248911bold {font-family:Arial;font-size:13px;font-weight:700;}#yiv4391248911 .yiv4391248911bold a {text-decoration:none;}#yiv4391248911 dd.yiv4391248911last p a {font-family:Verdana;font-weight:700;}#yiv4391248911 dd.yiv4391248911last p span {margin-right:10px;font-family:Verdana;font-weight:700;}#yiv4391248911 dd.yiv4391248911last p span.yiv4391248911yshortcuts {margin-right:0;}#yiv4391248911 div.yiv4391248911attach-table div div a {text-decoration:none;}#yiv4391248911 div.yiv4391248911attach-table {width:400px;}#yiv4391248911 div.yiv4391248911file-title a, #yiv4391248911 div.yiv4391248911file-title a:active, #yiv4391248911 div.yiv4391248911file-title a:hover, #yiv4391248911 div.yiv4391248911file-title a:visited {text-decoration:none;}#yiv4391248911 div.yiv4391248911photo-title a, #yiv4391248911 div.yiv4391248911photo-title a:active, #yiv4391248911 div.yiv4391248911photo-title a:hover, #yiv4391248911 div.yiv4391248911photo-title a:visited {text-decoration:none;}#yiv4391248911 div#yiv4391248911ygrp-mlmsg #yiv4391248911ygrp-msg p a span.yiv4391248911yshortcuts {font-family:Verdana;font-size:10px;font-weight:normal;}#yiv4391248911 .yiv4391248911green {color:#628c2a;}#yiv4391248911 .yiv4391248911MsoNormal {margin:0 0 0 0;}#yiv4391248911 o {font-size:0;}#yiv4391248911 #yiv4391248911photos div {float:left;width:72px;}#yiv4391248911 #yiv4391248911photos div div {border:1px solid #666666;min-height:62px;overflow:hidden;width:62px;}#yiv4391248911 #yiv4391248911photos div label {color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;}#yiv4391248911 #yiv4391248911reco-category {font-size:77%;}#yiv4391248911 #yiv4391248911reco-desc {font-size:77%;}#yiv4391248911 .yiv4391248911replbq {margin:4px;}#yiv4391248911 #yiv4391248911ygrp-actbar div a:first-child {margin-right:2px;padding-right:5px;}#yiv4391248911 #yiv4391248911ygrp-mlmsg {font-size:13px;font-family:Arial, helvetica, clean, sans-serif;}#yiv4391248911 #yiv4391248911ygrp-mlmsg table {font-size:inherit;font:100%;}#yiv4391248911 #yiv4391248911ygrp-mlmsg select, #yiv4391248911 input, #yiv4391248911 textarea {font:99% Arial, Helvetica, clean, sans-serif;}#yiv4391248911 #yiv4391248911ygrp-mlmsg pre, #yiv4391248911 code {font:115% monospace;}#yiv4391248911 #yiv4391248911ygrp-mlmsg * {line-height:1.22em;}#yiv4391248911 #yiv4391248911ygrp-mlmsg #yiv4391248911logo {padding-bottom:10px;}#yiv4391248911 #yiv4391248911ygrp-msg p a {font-family:Verdana;}#yiv4391248911 #yiv4391248911ygrp-msg p#yiv4391248911attach-count span {color:#1E66AE;font-weight:700;}#yiv4391248911 #yiv4391248911ygrp-reco #yiv4391248911reco-head {color:#ff7900;font-weight:700;}#yiv4391248911 #yiv4391248911ygrp-reco {margin-bottom:20px;padding:0px;}#yiv4391248911 #yiv4391248911ygrp-sponsor #yiv4391248911ov li a {font-size:130%;text-decoration:none;}#yiv4391248911 #yiv4391248911ygrp-sponsor #yiv4391248911ov li {font-size:77%;list-style-type:square;padding:6px 0;}#yiv4391248911 #yiv4391248911ygrp-sponsor #yiv4391248911ov ul {margin:0;padding:0 0 0 8px;}#yiv4391248911 #yiv4391248911ygrp-text {font-family:Georgia;}#yiv4391248911 #yiv4391248911ygrp-text p {margin:0 0 1em 0;}#yiv4391248911 #yiv4391248911ygrp-text tt {font-size:120%;}#yiv4391248911 #yiv4391248911ygrp-vital ul li:last-child {border-right:none !important;}#yiv4391248911 [Non-text portions of this message have been removed] |
|
Locked
Re: UPgrade to 4.8
Gary: JMRI can not be running when you do the upgrade. I dup you problem by having JMRI running and trying to install the upgrade.
Walt |
|
Locked
Slot monitor is blank
Ver 4.8 every thing else works but the slot monitor is totally blank for all tabs
|
|
Locked
connection
Jon Miller
Got the roster problem solved but now can't connect. This is a
Windows 7 machine to a DCS100, via a LocoBuffer? Not sure what version of LocoBuffer I have. It's just a PC board with a large serial? connector to a USB connector* and separate power supply and a LocoNet connector. Is this a LocoBuffer-II. Anyway it was working with the XP computer but seems not to work with the Win7. At one point it seemed to want a driver but not sure what I did to cause that message on screen. The "splash"? screen says it's connected to com 4! *serial connector to USB cable -- Jon Miller For me time stopped in 1941 Digitrax Chief/Zephyr systems, JMRI User NMRA Life member #2623 Member SFRH&MS |
|
Locked
Re: Still not printing readable pages
Rick, Can you confirm that you uninstalled Java and reinstalled it?
Can you determine if that was the last change before it started printing correctly? Paul |
|
Locked
Re: UPgrade to 4.8
Walt,Thank you for your help. I did try your suggestions and I continue to have problems.?
toggle quoted message
Show quoted text
Which browser do you use when upgrading JMRI? I wonder if that makes a difference. During the upgrade I receive the following error message:"Error opening file for writing.C:/program files (x86)\JMRI\LaunchJMRI.exeabort, retry or ignore" If I chose ignore and click on the short cut I receive the following message:"Windows cannot access the file specified device, path on file. You may not have the appropriate permission to access the item" I have uninstalled JMRI several times and I still get the same messages.?There is probably one step I am missing. Do you have any ideas? Thanks for your time. Gary On Thursday, August 10, 2017 8:41 PM, "walter.stanley.thompson.3@... [jmriusers]" <jmriusers@...> wrote:
? Gary: So you click on the Icon for PP or DP on your desk top and no other screen opens? On the bottom left of your desktop left click on the windows Icon. Scroll down the list of programs to JMRI, expand that and select "installtest" to run, Tell us what then happens. Walt #yiv8894426051 #yiv8894426051 -- #yiv8894426051ygrp-mkp {border:1px solid #d8d8d8;font-family:Arial;margin:10px 0;padding:0 10px;}#yiv8894426051 #yiv8894426051ygrp-mkp hr {border:1px solid #d8d8d8;}#yiv8894426051 #yiv8894426051ygrp-mkp #yiv8894426051hd {color:#628c2a;font-size:85%;font-weight:700;line-height:122%;margin:10px 0;}#yiv8894426051 #yiv8894426051ygrp-mkp #yiv8894426051ads {margin-bottom:10px;}#yiv8894426051 #yiv8894426051ygrp-mkp .yiv8894426051ad {padding:0 0;}#yiv8894426051 #yiv8894426051ygrp-mkp .yiv8894426051ad p {margin:0;}#yiv8894426051 #yiv8894426051ygrp-mkp .yiv8894426051ad a {color:#0000ff;text-decoration:none;}#yiv8894426051 #yiv8894426051ygrp-sponsor #yiv8894426051ygrp-lc {font-family:Arial;}#yiv8894426051 #yiv8894426051ygrp-sponsor #yiv8894426051ygrp-lc #yiv8894426051hd {margin:10px 0px;font-weight:700;font-size:78%;line-height:122%;}#yiv8894426051 #yiv8894426051ygrp-sponsor #yiv8894426051ygrp-lc .yiv8894426051ad {margin-bottom:10px;padding:0 0;}#yiv8894426051 #yiv8894426051actions {font-family:Verdana;font-size:11px;padding:10px 0;}#yiv8894426051 #yiv8894426051activity {background-color:#e0ecee;float:left;font-family:Verdana;font-size:10px;padding:10px;}#yiv8894426051 #yiv8894426051activity span {font-weight:700;}#yiv8894426051 #yiv8894426051activity span:first-child {text-transform:uppercase;}#yiv8894426051 #yiv8894426051activity span a {color:#5085b6;text-decoration:none;}#yiv8894426051 #yiv8894426051activity span span {color:#ff7900;}#yiv8894426051 #yiv8894426051activity span .yiv8894426051underline {text-decoration:underline;}#yiv8894426051 .yiv8894426051attach {clear:both;display:table;font-family:Arial;font-size:12px;padding:10px 0;width:400px;}#yiv8894426051 .yiv8894426051attach div a {text-decoration:none;}#yiv8894426051 .yiv8894426051attach img {border:none;padding-right:5px;}#yiv8894426051 .yiv8894426051attach label {display:block;margin-bottom:5px;}#yiv8894426051 .yiv8894426051attach label a {text-decoration:none;}#yiv8894426051 blockquote {margin:0 0 0 4px;}#yiv8894426051 .yiv8894426051bold {font-family:Arial;font-size:13px;font-weight:700;}#yiv8894426051 .yiv8894426051bold a {text-decoration:none;}#yiv8894426051 dd.yiv8894426051last p a {font-family:Verdana;font-weight:700;}#yiv8894426051 dd.yiv8894426051last p span {margin-right:10px;font-family:Verdana;font-weight:700;}#yiv8894426051 dd.yiv8894426051last p span.yiv8894426051yshortcuts {margin-right:0;}#yiv8894426051 div.yiv8894426051attach-table div div a {text-decoration:none;}#yiv8894426051 div.yiv8894426051attach-table {width:400px;}#yiv8894426051 div.yiv8894426051file-title a, #yiv8894426051 div.yiv8894426051file-title a:active, #yiv8894426051 div.yiv8894426051file-title a:hover, #yiv8894426051 div.yiv8894426051file-title a:visited {text-decoration:none;}#yiv8894426051 div.yiv8894426051photo-title a, #yiv8894426051 div.yiv8894426051photo-title a:active, #yiv8894426051 div.yiv8894426051photo-title a:hover, #yiv8894426051 div.yiv8894426051photo-title a:visited {text-decoration:none;}#yiv8894426051 div#yiv8894426051ygrp-mlmsg #yiv8894426051ygrp-msg p a span.yiv8894426051yshortcuts {font-family:Verdana;font-size:10px;font-weight:normal;}#yiv8894426051 .yiv8894426051green {color:#628c2a;}#yiv8894426051 .yiv8894426051MsoNormal {margin:0 0 0 0;}#yiv8894426051 o {font-size:0;}#yiv8894426051 #yiv8894426051photos div {float:left;width:72px;}#yiv8894426051 #yiv8894426051photos div div {border:1px solid #666666;min-height:62px;overflow:hidden;width:62px;}#yiv8894426051 #yiv8894426051photos div label {color:#666666;font-size:10px;overflow:hidden;text-align:center;white-space:nowrap;width:64px;}#yiv8894426051 #yiv8894426051reco-category {font-size:77%;}#yiv8894426051 #yiv8894426051reco-desc {font-size:77%;}#yiv8894426051 .yiv8894426051replbq {margin:4px;}#yiv8894426051 #yiv8894426051ygrp-actbar div a:first-child {margin-right:2px;padding-right:5px;}#yiv8894426051 #yiv8894426051ygrp-mlmsg {font-size:13px;font-family:Arial, helvetica, clean, sans-serif;}#yiv8894426051 #yiv8894426051ygrp-mlmsg table {font-size:inherit;font:100%;}#yiv8894426051 #yiv8894426051ygrp-mlmsg select, #yiv8894426051 input, #yiv8894426051 textarea {font:99% Arial, Helvetica, clean, sans-serif;}#yiv8894426051 #yiv8894426051ygrp-mlmsg pre, #yiv8894426051 code {font:115% monospace;}#yiv8894426051 #yiv8894426051ygrp-mlmsg * {line-height:1.22em;}#yiv8894426051 #yiv8894426051ygrp-mlmsg #yiv8894426051logo {padding-bottom:10px;}#yiv8894426051 #yiv8894426051ygrp-msg p a {font-family:Verdana;}#yiv8894426051 #yiv8894426051ygrp-msg p#yiv8894426051attach-count span {color:#1E66AE;font-weight:700;}#yiv8894426051 #yiv8894426051ygrp-reco #yiv8894426051reco-head {color:#ff7900;font-weight:700;}#yiv8894426051 #yiv8894426051ygrp-reco {margin-bottom:20px;padding:0px;}#yiv8894426051 #yiv8894426051ygrp-sponsor #yiv8894426051ov li a {font-size:130%;text-decoration:none;}#yiv8894426051 #yiv8894426051ygrp-sponsor #yiv8894426051ov li {font-size:77%;list-style-type:square;padding:6px 0;}#yiv8894426051 #yiv8894426051ygrp-sponsor #yiv8894426051ov ul {margin:0;padding:0 0 0 8px;}#yiv8894426051 #yiv8894426051ygrp-text {font-family:Georgia;}#yiv8894426051 #yiv8894426051ygrp-text p {margin:0 0 1em 0;}#yiv8894426051 #yiv8894426051ygrp-text tt {font-size:120%;}#yiv8894426051 #yiv8894426051ygrp-vital ul li:last-child {border-right:none !important;}#yiv8894426051 [Non-text portions of this message have been removed] |
|
Locked
ADMIN: How To Ask Your Question
======================
HOW to ask your question ====================== One of the most common questions about JMRI is "How do I get it to work?". This isn't really a problem with JMRI itself in most cases, but there are HUGE numbers of possible configurations for DCC systems, and Windows, Linux, and Mac computers out there. Just asking "How do I get it to work" is NOT going to get you any useful help. When asking ANY question, you should utilize a meaningful subject line that indicates the problem and include the following information in the body of the message: + If JMRI has started copy and paste the System Console into the body. (its under help on the start screen) + Has JMRI worked before on this computer? + Computer make and model + if you have just upgraded, from which version + Any other DCC devices in use + Specific details of your difficulty including error messages if any, or what you would like to do with JMRI. Decoder Programming, Signals, Automation, etc. Depending on the nature of the problem, you may need to supply even more information, but this is the absolute required for anyone to give you accurate answers. Signing you post helps keep the group friendly and personable! Your moderators |
|
Locked
(No subject)
Sharpy
We assume you are using a windows system. Is that correct? If windows open the JMRI program folder and run the install test. Let us know the results. More info would help you . What is theinterface you are using, What is the MRC command station type, How do you have the connection preferences set up. Walt |
|
Locked
Re: System Console Warning Message
On 08/09/2017 09:47 AM, Paul Bender wrote:
I've been looking at this over the last couple of days, and the only way I have been able to replicate what you are seeing is by connecting a Roco Z21 command station to the LIUSB-Ethernet.On Aug 8, 2017, at 6:53 PM, wmseapc@... [jmriusers] <jmriusers@...> wrote:That information is also stored in a log file ( see below). So yes that was what I needed. Connecting a version 3.6 LZV100 caused no issues. Can you tell me a little more about your setup? What command station are you using? What software version is the command station? What else is connected to the command station? Have you tried your LIUSB-Ethernet with it being the only thing plugged into the command station? What version of MacOS X do you have installed? Thanks, Paul |
Suzie Tall
Bob Jacobsen
to navigate to use esc to dismiss