开云体育

Are there any plans to add LDt LS Accessory decoders to the Roster? If not, can anyone suggest where they should be stored for now? Rgds Joff

Did you do New Loco->Read Type from decoder? BTW almost all modern ESU motor decoders identify to a unique JMRI model (if your JMRI version is current). The only exception is the "LokSound Select

Actually, you need to do New Loco->Read Type from decoder. Identify is only for existing roster entries and mainly looks at loco address (I can't remember offhand but it may also check

It's a Dell laptop running xp I've used it on all previous versions of DP going way back I made no preference changes when I up graded to 4.8 Just downloaded and installed 4.8 Everything works fine

Terry: What is the Computer system you are using, the OS may be important. Alos in the Preference under Display what do you have set? I changed my Preference connection to ZephyrXtra and do not see

The command station is a zephyr extra the headings across the top that say unused/show all slots are what I am calling tabs And yes it's loco net slot monitor in production ver 4.8 [Non-text portions

Bill The PR3 will not connect you tp the MRC command station! It is to connect to a digitrax command station of to be used as a stand alone programmer of decoders. Walt

The Roco documents with the Lok say PLUx22. (With sound and smoke.) JMRI gives a list of dozens of decoders. Sort of like Tsunami or Loksound. My first ZIMO, so I do not want to do something bad.

Hi It should not matter which Zimo small scale sound decoder it is, they should all behave the same re mapping. It all depends which socket you have in the loco as to which decoder is fitted:- PluX-22

Terry, Are you referring to LocoNet Slot Monitor? If so, what do you mean by "all tabs"? There aren't any "tabs", at least "tabs" as I know them. What command station? If DCS240, are you using

Thomas, in JMRI click on identify which should give you the address after that you should be able to read the decoder type. I don't have JMRI near me to give you the exact steps but you can see what

My nice new Roco BR85 comes with a Zimo decoder. JMRI has a long list of decoders to select from. I have no idea which decoder in in the Lok. And the Roco documentation just says "sound decoder". SO

/On 8/12/2017 1:02 PM, Nick Kulp cornwall9@... [jmriusers] wrote:// / Well I guess 20+ years is good usage. Probably should get something new. Am thinking about doing that. -- Jon Miller For me

Jon, Yep, you and I and hundreds more bought and built these. When Digitrax came out with their horrible PR1 with no software to use, it was the very FIRST Loco buffer designed by the original

This is a typical symptom of an antivirus program quarantining LaunchJMRI.exe on Windows. -- Dave in Australia

You have to find out why the JMRI installer isn’t able to put the LaunchJMRI.exe file into the C:/program files (x86)\JMRI directory. It’s not going to work until that problem is solved. I’m

Walt,I did check to make sure JMRI isn't running as you suggested. I continue to have the same problems I listed above. Thanks so much for your time.?Is there anything else I can do? Gary

Is the connection not happening, or does it show as connected and you can't control anything? The reason I ask is I had a problem where it would connect, but I couldn't control my locos. In the

I have been reading up on other interfaces and I am reasonable sure the problem is the interface. ?Thank you for your time. ?I ordered a DIGITRAX PC3 XTRA today. ?I think this will do what I want

Gary: JMRI can not be running when you do the upgrade. I dup you problem by having JMRI running and trying to install the upgrade. Walt