Re: Cannot start to read decoders
..thats a funny one - will try it this evening and report back !
|
Re: Unable to Delete a Sensor; Then a Java Error Displays when Storing the XML
Hi Bob,
?
Thanks for reporting this, also jmrilog.txt which provided me with the stack trace required.
The issue could potentially occur with a few other JMRI resources ( e.g. WiThrottle server ) upon deleting the Route alignment Sensor.
?
I've gradually been tweaking Routes for increased reliability in future JMRI versions, i.e.
?
- Route - add CheckForNull annotation
- update wiThrottle RouteController
- AbstractXmlAdapter / AbstractNamedBeanManagerConfigXML string constants
- update RouteExportToLogix
- update DefaultRouteManager Xml
- RouteTable output table listeners
- Route Add / Edit Frame lint
?
?
Again thanks for reporting !
?
Steve.
--
Steve Young,
Member JMRI Dev Team
|
Re: Automatic Dispatching
Hi Bill
?
I don’t suppose you are up for trying a totally different approach? But I too was trying a few different aproaches to automate trains via JMRI 10 years ago on my very small layout.
?
I ended up creating signal controlled warrants and a Jython script.
?
You can see the history on my homepage. Use the translate button to the lower left, if your Danish is a bit rusty.
?
?
The past few years, I did not have a layout. But now that I am setting up a new layout (on shelves and with a train elevator in the middle - but that is a different story), I realized that the pages above did not really tell me, how I actually had been setting it all up. Hence I tried to document that here:
?
If you are interested in the latest version of the Jython script including control og the train elevator (not fully tested yet), you can find it here:
?
BR
KJ
|
Re: Lock Control Panel Position on Tablet
Attached showing what happens when I swipe up and left. I want the panel to be locked so that accidental swiping does not move the panel on the tablet's viewport.
|
Re: DecoderPro Opens every time as a new install
George,
?
As a long delayed afterthought, it should be said that this windows 11 laptop is almost always carried to the club and requires the login process when opened while there.?
?
We are developing a large expansion to our layout and my team is responsible for installing and testing the LCC electronics.? Much of that is done from home, but the critical work has to be verified while connected to the LCC network.??
?
My password cannot be verified via the internet while there.??
?
Tomorrow while getting ready to go home, I will shut it off and restart it to see if I can duplicate your problem.
?
Cliff
|
Re: PanelPro New Feature - Panel Swipe Navigation on Tablet
I do not want to randomly navigate. My existing linking labels work fine however I am proposing that attributes be added to the panel, let's call them "Swipe_R" and "Swipe_L". If panel1 Swipe_R = panelA and panel1 Swipe_L = panelB then when I'm on panel1 and I swipe right then panelA will be on top and if I'm on panel1 and I swipe left then panelB will be on top. Linking labels would not be needed to navigate. Is this feasible?
|
Re: Lock Control Panel Position on Tablet
Ok, now the "powered by jmri" footer is gone but I think my panels are just a little too big for the tablet viewport because I am still able to move the whole panel about 1/4" down and 1/4" to the right on the tablet.
|
Re: Lock Control Panel Position on Tablet
I just noticed I have */ instead of /* at the beginning of the 2 comments. Let me go change that.
|
Re: Lock Control Panel Position on Tablet
Steve, attachment1 shows my user files location and the location of my new user.css file. Attachment2 shows the contents of the new user.css file.
The footer "powered by jmri" still shows on my panels after clearing the tablet cache. I am using the fully kiosk browser. My indentation is 2 spaces. I am missing something.
|
Re: Cannot start to read decoders
Erik, I suspect we'll hear from others on this, but I noticed what I believe is the same behavior on my system, and perhaps it was a change made during a recent update.? When you open your Roster, click on any entry and you'll see that the buttons at the bottom right will transition from "greyed out" to "active."? It was a head-scratcher for me until I found the solution, and I recall restarting JMRI several times before I discovered it.? HTH!
John?
|
I remover JAVA 11 and installed JAVA 17 then JMRI 5.10, Would not open or start. Then JMRI 5.11.4 Would not open or start.
?
I have used windows JMRI for loading a new JMRI. I been using JMRI for years. Due to getting hit by fraud my CU had me clear every thing off this computer and reload the applications and files.
?
What to do?
?
Jerry F
|
On 3/27/2025 10:24 PM, David Olesen via groups.io wrote: Is there a way to keep my model board “as-is” while reconfiguring some of the columns? I am not currently a user of JMRI's newer "CTC" tools, but I have experimented with it, before deciding to "do it myself" without the JMRI newer CTC tool. But I have to ask, what "reconfiguration" do you want to do - that does not affect the "model board"? Understanding that seems important to get a usable answer for your question(s)...
|
Oops. Having it in the 5.9.7 release note was my mistake. Sorry. Being fixed now. Bob On Mar 28, 2025, at 5:20?PM, Henk via groups.io <henk_persoon@...> wrote:
Ok, it has me confused a little but if the 5.11 test version has it I can give that one a try.
To complete the reason why I thought it already was implemented was because I saw the dark mode used on the JMRI.org webpage already, for example these 2 places:
The images in these 2 links are in the dark mode.
The mentioning of the dark-mode was in the release notes of the 5.9.7, I assumed it was part of all releases after that but it seems I was wrong.
I'll go give the 5.11 a try soon. — Bob Jacobsen rgj1927@...
|
On Fri, Mar 28, 2025 at 03:22 PM, Henk wrote:
Ok, it has me confused a little but if the 5.11 test version has it I can give
that one a try.
5.11.5 will have it (it should be released in a week or so) or you can wait until 5.12 to be released sometime around June. That mention in 5.9.7 is a mistake and I will pass it on to be fixed -- Peter Ulvestad Linux Mint 22.1, JMRI 5.11.4plus, Java 21.0.6 JMRI Users Group Moderator ( /g/jmriusers ) JMRI Developers Group Moderator ( ) Tam Valley Group Moderator ( ) Sprog-DCC Group Moderator ( ) Edmonton Model Railroad Association ( )
|
Re: SML for Reversing Loops
Ralph,
The track plan violates the poorly documented rule that there can only be one direct connection between two neighbor blocks.
In your example, the loop blocks at each end have two connections to the turnout blocks via the normal and diverging legs.
The each loop needs at least two blocks. ?You also need intermediate signals at the new block boundaries.
Dave Sand
----- Original message -----
Subject: [jmriusers] SML for Reversing Loops
Date: Friday, March 28, 2025 3:52 PM
I constructed a simple layout editor panel with two back to back reverse loops. The "auto generate signaling pairs" only created 1 pair. I created the other 7 manually and did enough sanity checks (occupancy and turnout states) to convince myself that the signal aspects work as expected. Is there a problem for JMRI signal pair recognition in this somewhat strange configuration or am I approaching the problem incorrectly?
?
I uploaded the panel file to a problems being worked on folder, Snorkel, if someone is interested.
?
--
-Ralph
|
Ok, it has me confused a little but if the 5.11 test version has it I can give that one a try.
To complete the reason why I thought it already was implemented was because I saw the dark mode used on the JMRI.org webpage already, for example these 2 places:
The images in these 2 links are in the dark mode.
The mentioning of the dark-mode was in the release notes of the 5.9.7, I assumed it was part of all releases after that but it seems I was wrong.
I'll go give the 5.11 a try soon.
|
Re: DecoderPro Opens every time as a new install
Thanks Cliff,
I suspected that the login password not having access to the internet for Windows to confirm the account has something to do with this.
George
On Fri, Mar 28, 2025 at 2:03 PM Cliff Anderson via <cliffaa= [email protected]> wrote: George,
?
"Quick question, are you using a password on the windows 10 log in?"
?
Neither of our computers require a password to log in.? Any member who gets there first, just turns on the computer.??
?
Both computers have OS batch files from the DOS era that automatically start the appropriate app and handle a few housekeeping chores,??
?
The entire building is powered down when the last member leaves to save on the electric bill.
?
"Windows puts up a message after it accepts the login password that it is creating a temporary profile."
?
That is not something that I have ever seen on any windows computer.? I seem that it might be your most important clue as to where to search for the root cause of the problem.? A quick search for windows creates a temp user profile yielded too many hits to resolve here, but the first one led to:
?
Good luck deciphering that.
?
Cliff
|
I constructed a simple layout editor panel with two back to back reverse loops. The "auto generate signaling pairs" only created 1 pair. I created the other 7 manually and did enough sanity checks (occupancy and turnout states) to convince myself that the signal aspects work as expected. Is there a problem for JMRI signal pair recognition in this somewhat strange configuration or am I approaching the problem incorrectly?
?
I uploaded the panel file to a problems being worked on folder, Snorkel, if someone is interested.
?
--
-Ralph
|
Cannot start to read decoders
Hi, I am running DecoderPro since many years without any Problem. I recently got another Laptop with win11Pro preinstalled - Version 24H2. After installation DecoderPro ask me to get started by checking in with a new Loco placed on the programming track. It comes back with the correct decoder and I store it in the Roster.
?
When I exit and restart DecoderPro I click NEW+ to get a new Loco and decoder? recognized, but the field at the bottom left ( Read decoder type) is greyed out.?
After deinstallation i even deleted all remnants from JMRI and even cleaned the registry as far as I could.
?
I reinstalled? - did no new Lokomotive, but tried to import a complete Lokpark/Roster from my second laptop - all 104 locos appeared correctly, but I cannot add a new locomotive/decoder because? in the new locomotive Window the button at the bottom left (read decoder Type) is still greyd out. And no - I am not Read only....
?
I red several JMRI topics, I tried to rebuild the coplete Lokpar/Roster (which did nothing) and so I am stuck.
?
I am working with DR5000/Yamorc YD7001 and Z21, I can work with the Throttle without any Problem, so the connection to my centralStation is ok (over WIFI by the way)
?
I am currently on 5.10.4 Release but tried also the? 5.11.4 TestRelease with same result.
Can I ask to help me ?
Vest regards?
Erik
|
Following.
?
Didn't realize darkmode was a thing! Would love to enable it myself too.
?
Isaac
|
Swanny
Bob Jacobsen
Peter Ulvestad
Glikestrains