Re: Panel selection doesn't work
#rpi
Dale, I see the same thing with my RPi-JMRI image, up-to-date Bookworm with 5.11.4. Have you tried it with earlier versions of either JMRI or Android OS? It would be helpful to know when this started.
Also, I suspect this is the same issue as you mentioned regarding Linking Labels.
?
Do any of the developers know where in the code this action is handled? I assume there is a call to some OS function for bringing a window into foreground/focus. I could do some debugging if I knew where to look.
?
Dale, you may find this gets more developer attention if you create a JMRI GitHub Issue.
?
--SteveT
|
Re: LogixNG extracting multiple values from table
#logixng
George,
Try something like this.
The current name of a turnout is in the turnout local variable. ?The row is selected from the table using the turnout name and then the specified state is selected from the State column for the selected row.
Dave Sand
----- Original message -----
Subject: [jmriusers] LogixNG extracting multiple values from table #logixng
Date: Saturday, March 22, 2025 5:49 PM
JMRI 5.10
Windows 11
?
I've been bending my pick trying to figure this out all afternoon.
I want to set a collection of turnouts to individual states. I have a table with two columns, turnout name and desired state. I can extract the turnout names to a local variable in a for-each statement and I can set each of those turnouts to some constant state like THROWN. But I can't figure how to extract the target state from that second column and apply it to the current turnout from the same row.?
?
Must be simple but I don't get it.
?
George
|
Re: Editing a layout panel
AD, ? Normal case when a train leaves a block, it goes inactive and erasing the content makes for normal movement. But when that content hasn’t moved to any other block, it becomes lost. What else could it do? ? -Ken Cameron, Member JMRI Dev Team
? ?
|
LogixNG extracting multiple values from table
#logixng
JMRI 5.10
Windows 11
?
I've been bending my pick trying to figure this out all afternoon.
I want to set a collection of turnouts to individual states. I have a table with two columns, turnout name and desired state. I can extract the turnout names to a local variable in a for-each statement and I can set each of those turnouts to some constant state like THROWN. But I can't figure how to extract the target state from that second column and apply it to the current turnout from the same row.?
?
Must be simple but I don't get it.
?
George
|
Re: Next jmri non test version
Tony,
?
I've been running the test versions for 22+ years, since JMRI 1.something. (ISTR they were ALL test versions back then!) I've even installed non-released nightly builds on a few occasions to take advantage of a fix/enhancement.
?
That's never caused a problem, so if you need 5.11.2 to use ghosts, go for it!
?
Steve
"Breezlys"
|
Re: Editing a layout panel
Tony,
When a block becomes unoccupied, the block content is no longer valid so it is erased.
Dave Sand
----- Original message -----
Subject: Re: [jmriusers] Editing a layout panel
Date: Saturday, March 22, 2025 2:30 PM
Ps:
?
why does setting block sensors to inactive cause the block content in the block table to be erased.
?
tony
|
The stop sign is to "EStop all JMRI managed throttles". I have never used it and don't see that being the issue Next to the stop sign should be track power indication, is showing green ? -- Peter Ulvestad Linux Mint 22.1, JMRI 5.11.3plus, Java 21.0.5 JMRI Users Group Moderator ( /g/jmriusers ) JMRI Developers Group Moderator ( ) Tam Valley Group Moderator ( ) Sprog-DCC Group Moderator ( ) Edmonton Model Railroad Association ( )
|
Re: Editing a layout panel
Tony,
Select "Options -> Show Help Bar in Edit Mode". ?This will show you the mouse/key actions.
Note: ?Make sure nothing is selected by clicking in a blank area.
Dave Sand
----- Original message -----
Subject: [jmriusers] Editing a layout panel
Date: Saturday, March 22, 2025 2:23 PM
Dear Dave
?
I have done these things over a billion times but have no memory of what to do and no matter what i try nothing works.. i cant find the info in the manual in the edit layout panel area.
using jmri 5.10 on windows 11 with a pad-no mouse.
?
in edit mode i select block content and select block 39
i place cursor in upper left corner and click space bar-the selection menu at the top now starts going crazy selecting one item after the other. ?
?
This is new-why does that happen?
?
shift click gets the block content in the upper left corner
i select the object and try to move it. I combine the arrow with every key possible and nothing moves it as i move the cursor
?
how do i move an object?
?
tony
|
Re: Editing a layout panel
I am in process of editing the panel at a stand still. Can anyone online help
Tony
toggle quoted message
Show quoted text
On Mar 22, 2025, at 3:23?PM, AD <bklyns_baseball_club@...> wrote:
? Dear Dave
?
I have done these things over a billion times but have no memory of what to do and no matter what i try nothing works.. i cant find the info in the manual in the edit layout panel area.
using jmri 5.10 on windows 11 with a pad-no mouse.
?
in edit mode i select block content and select block 39
i place cursor in upper left corner and click space bar-the selection menu at the top now starts going crazy selecting one item after the other. ?
?
This is new-why does that happen?
?
shift click gets the block content in the upper left corner
i select the object and try to move it. I combine the arrow with every key possible and nothing moves it as i move the cursor
?
how do i move an object?
?
tony
|
I am showing a red stop signal on the WiThrottle Panel. The Panel shows my phone connected to the system, but nothing works. I must have something turned off, blocked or not activated. Haven't found the right reference in the help. What should I check?
?
Larry
|
Re: Next jmri non test version
There’s a little bit about the release philosophy here:
The road map, which gives you an idea of when the first numbers change, is here:
(That needs an update, will work on that)
Bob
—
Bob Jacobsen
rgj1927@...
|
Re: Next jmri non test version
And the scheduled releases / milestones are here: (5.12 is scheduled for the end of June 2025.) At Sat, 22 Mar 2025 11:11:36 -0700 "stevemac" <steveo@...> wrote:
Note the production releases are even numbers.
-- Robert Heller -- Cell: 413-658-7953 GV: 978-633-5364 Deepwoods Software -- Custom Software Services -- Linux Administration Services heller@... -- Webhosting Services
|
Re: Next jmri non test version
I don't know JMRI's developers' "plan", but the usual reason to jump to a new major version number is something like a major rewrite or some other major change. Version numbers are *not* "decimal" numbers (fractions), so there is no partitular reasons for the numbers after the dots to "overflow". Different software projects do different things. JMRI seems to use odd secondary version numbers for [stable] test releases and even numbers for stable production releases, At Sat, 22 Mar 2025 10:22:10 -0700 "AD" <bklyns_baseball_club@...> wrote:
also after reaching 5.10 why wasnt the next non test version 6.0?
tony
-- Robert Heller -- Cell: 413-658-7953 GV: 978-633-5364 Deepwoods Software -- Custom Software Services -- Linux Administration Services heller@... -- Webhosting Services
|
Re: Editing a layout panel
Ps:
?
why does setting block sensors to inactive cause the block content in the block table to be erased.
?
tony
|
Dear Dave
?
I have done these things over a billion times but have no memory of what to do and no matter what i try nothing works.. i cant find the info in the manual in the edit layout panel area.
using jmri 5.10 on windows 11 with a pad-no mouse.
?
in edit mode i select block content and select block 39
i place cursor in upper left corner and click space bar-the selection menu at the top now starts going crazy selecting one item after the other. ?
?
This is new-why does that happen?
?
shift click gets the block content in the upper left corner
i select the object and try to move it. I combine the arrow with every key possible and nothing moves it as i move the cursor
?
how do i move an object?
?
tony
|
On 3/22/2025 0:01 AM11:06 AM, Jim Moomaw wrote: _So, how big is the software?_? The XML file is 12MB, which has 250K lines of code in the file (all generated with PanelPro).? I don't know how this compares to other large layouts.? I'm guessing the final build- out will be 50% larger. I have implemented two GRS Type K Model M Coded CTC implementations, prototypically. One has a 5-column office machine, and was my first attempt at prototypical signaling. I am currently working on a second GRS CTC implementation, with an office machine with 23 populated columns, with 35 CTC-controlled signal masts and 8 ABS signal masts, with about 45 occupancy blocks. It is implemented largely by un-modified JMRI "SML", with some "overrides" of certain signal mast aspects via Logic. The "code line" and "logic" that is nearest the code line is implemented in Jython, much in the same way that GRS had implemented its "boxes" in the "Field" and in the "Office". For my second CTC solution, the JMRI XML file is less than 3 MBytes, and the Jython is another ~400 KBytes. So I might _guess_ that my solution is smaller than your implementation, (This assumes that you do not have any "other" JMRI features that take up lots of space in the XML file...) The idea that (prototype) "signaling is hard" is an understatement! Getting signaling "right" is not for the faint of heart! The second CTC solution I mentioned has taken 2-plus years of development and debugging, so far, and still LOTS of things to "fix"...
|
" ? // infer a background icon from its size "
?
Yeah, that makes perfect sense based on observation.?? It's the 'not expecting that to happen' thing that caught me out.?
?
"importance of background images staying in place..."
?
I'd say that's still important.? The "danger" of grabbing and moving those Lvl1 objects in PE is a downside of that editor (esp with no Ctrl-Z rescue);? that's not an issue for CPE, but also means CPE is useless for Lvl1 stuff.? An OK tradeoff in my eyes.? CPE works fine for most tasks, but then I forget about needing that "special" Lvl1 PE tool since I don't use it much.
?
--
Jim Moomaw
Portland, OR
- Willamette Model Railroad Club (WMRC)
- NMRA, Pacific NW
|
Re: Next jmri non test version
If people don't download and test the test versions, then when the release happens, it is untested software....
If there's a new feature you want to use, then try the test version.? ?If it works, great! (please tell people it does what you need).? ? If there's a problem, report the problem and someone can address it.? ?No problem reports, and any problem will still
be there in the production release.?
And, you'll be waiting until June to find those bugs...
- Nigel
toggle quoted message
Show quoted text
------ Original Message ------
Date 22/03/2025 17:22:10
Subject [jmriusers] Next jmri non test version
we need 5.11.2 to use ghosts.
i dont like downloading test versions.
when will the next non test version expected to be available?
?
also after reaching 5.10 why wasnt the next non test version 6.0?
?
tony
|
Re: Next jmri non test version
On Sat, Mar 22, 2025 at 11:22 AM, AD wrote:
when will the next non test version expected to be available?
Production releases are approximately every 6 months (June and December). also after reaching 5.10 why wasn't the next non test version 6.0?
The only time the first digit is increased is when there is a major change to JMRI, such as the move from Java 8 to 11 for example. -- Peter Ulvestad Linux Mint 22.1, JMRI 5.11.3plus, Java 21.0.5 JMRI Users Group Moderator ( /g/jmriusers ) JMRI Developers Group Moderator ( ) Tam Valley Group Moderator ( ) Sprog-DCC Group Moderator ( ) Edmonton Model Railroad Association ( )
|
Re: Next jmri non test version
Note the production releases are even numbers.
|
Ken Cameron
George Hofmann
Peter Ulvestad
Bob Jacobsen