On Wed, Sep 4, 2024 at 01:49 PM, Gord King wrote:
but the roster files in the backup still haven't been modified since 24-07-30.?
There's a directory under operations called "backups" not "backup".? Is that the directory you are searching?? Note that the "backups" directory is only updated when you press the "Backup" button in the Settings window.??
?
When you start OperationsPro it automatically loads the last set of files saved by you.? You don't need to do a "Restore" or a load.
?
Under the "operations" directory, you should find the six operation files with an "Date Modified" the last time you did a save.
Dan
|
Hi Dan,
?
I have to go back to the email I sent on Aug 30th.
?
I completed your instructions setting up a new config and data file, but contrary to my previous response, the program is not performing properly.? Here's what is happening.? I will 'set' a car or a locomotive, and the new 'set' appears to be accepted, and they appear on the 'preview' as expected.? However when I 'save' and exit the program, then restart, the new settings have reverted to the previous settings, yet the 'new' setting still appear on the 'preview' until I make another change in settings.
?
When I go into my data file, none of? car, engine, location, or route rosters files have been modified since 24-07-30 which is when my problem appeared.? The program auto backups are up to date, but the roster files in the backup still haven't been modified since 24-07-30.? It appears the program is not saving changes made.? Any ideas???
?
Gord
|
Version 2.07.21 is ready for prime time.
?
New Features in version 2.07
-
This version of MR SLAM Formatter introduces a significant new capability to the program; the ability to insert car images into manifest and switch lists. This capability is fully described in manual section XII.C.? If you don't wish to include images in your documents, you can continue to use the program in text mode.
Bug Fixes
-
Fixed an issue where the missing car report was shown on the first manifest or switch list created during a program session, but it was not shown on subsequent documents. This bug crept into version 2.04 but has now been exterminated.
-
Resolved an issue where in 2 column/page mode, the dashed line that separates the 2 columns, was not the correct height when switching between landscape and portrait format.
?
The program is free to download and use.? It runs on Window's, Macintosh, and it should run under Linux (as yet untested).? The program doesn't require Excel or other costly programs, just Java and Adobe Acrobat (both are free).? The program comes with a very detailed manual and several instructional videos are available.? Visit the program's website at ? ? to learn more, see examples of documents, and to download the program.
|
Thank you Dave. I will put on my stupid cap and sit in the corner now. I loaded Daniel's password patch to test it on my Laptop and forgot about doing that, when near the same time, the layout computer had suffered a communications issue shutting down the railroad, that distracted me. When I got back to the development Laptop, I forgot, "I Didn¡¯t Setup Permissions."?
If you forget why you¡¯ve walked into a room ¡ ?wait ¡ ?what was I talking about? ?
John ?Bauchiero
- D&H Model Railroad -?NCE PH-Pro & PowerCab, Pi4b, DCC-EX - JMRI current test version
toggle quoted message
Show quoted text
On Sep 4, 2024, at 11:21?AM, Dave Sand via groups.io <ds@...> wrote:
John,
Edit?/Users/enduser/Library/Preferences/JMRI/.permissions.xml
? <Settings>
??? <Enabled>no</Enabled>
? </Settings>
Change Enabled to no.
For details about the new Permissions feature in JMRI, see?
Dave Sand
----- Original message -----
Subject: Re: [jmriusers] Mac Java 17 upgrade caused permission issue
Date: Wednesday, September 04, 2024 10:13 AM
There are other errors in the log of my own doing. The significant line(s) ?highlighted (user Guest has not permission). My question is how and what changed my permission? Is it because I am using a patched 5.9.2?
2024-09-04T10:51:01,624 util.Log4JUtil ? ? ? ? ? ? ? ? ? ? ? ?INFO ?- * JMRI log ** [main]
2024-09-04T10:51:01,629 util.Log4JUtil ? ? ? ? ? ? ? ? ? ? ? ?INFO ?- This log is stored in file: /Users/enduser/Library/Preferences/JMRI/log/session.log [main]
2024-09-04T10:51:01,630 util.Log4JUtil ? ? ? ? ? ? ? ? ? ? ? ?INFO ?- This log is appended to file: /Users/enduser/Library/Preferences/JMRI/log/messages.log [main]
2024-09-04T10:51:01,632 apps.Apps ? ? ? ? ? ? ? ? ? ? ? ? ? ? INFO ?- PanelPro version 5.9.2plus+jenkins+20240815T0713Z+Rb2a88be98b starts under Java 17.0.12 on Mac OS X aarch64 v14.6.1 at Wed Sep 04 10:51:01 EDT 2024 [main]
2024-09-04T10:51:02,159 permission.DefaultPermissionManager ? INFO ?- Permission file: /Users/enduser/Library/Preferences/JMRI/.permissions.xml [main]
2024-09-04T10:51:02,162 permission.DefaultPermissionManager ? INFO ?- Permission system is enabled: yes [main]
2024-09-04T10:51:03,773 apps.Apps ? ? ? ? ? ? ? ? ? ? ? ? ? ? INFO ?- Starting with profile New_Profile.3f6317b2 [main]
2024-09-04T10:51:03,793 node.NodeIdentity ? ? ? ? ? ? ? ? ? ? INFO ?- Using aeff0b20-6eef-11e9-8000-9801a7bc11cb as the JMRI storage identity for profile id 3f6317b2 [AWT-EventQueue-0]
2024-09-04T10:51:03,852 dccpp.DCCppInitializationManager ? ? ?INFO ?- DCC++ Initialization Complete [main]
2024-09-04T10:51:03,970 roster.Roster ? ? ? ? ? ? ? ? ? ? ? ? INFO ?- Reading roster file with rootFromName(/Users/enduser/Library/Preferences/JMRI/roster.xml) [main]
2024-09-04T10:51:04,051 withrottle.FacelessServer ? ? ? ? ? ? INFO ?- Published ZeroConf service for 'my jmri railroad._withrottle._tcp.local.' on 192.168.1.33:12090 [WiThrottleServer]
2024-09-04T10:51:04,053 withrottle.FacelessServer ? ? ? ? ? ? INFO ?- Creating new WiThrottle DeviceServer(socket) on port 12090, waiting for incoming connection... [WiThrottleServer]
2024-09-04T10:51:04,187 startup.PerformFileModel ? ? ? ? ? ? ?INFO ?- Loading file /Users/enduser/Library/Preferences/JMRI/New_Profile.jmri/Pi_DCC_EX.xml [main]
2024-09-04T10:51:04,925 util.FileUtilSupport ? ? ? ? ? ? ? ? ?INFO ?- File path program: is /Applications/JMRI/ [main]
2024-09-04T10:51:04,925 util.FileUtilSupport ? ? ? ? ? ? ? ? ?INFO ?- File path preference: is /Users/enduser/Library/Preferences/JMRI/ [main]
2024-09-04T10:51:04,925 util.FileUtilSupport ? ? ? ? ? ? ? ? ?INFO ?- File path profile: is /Users/enduser/Library/Preferences/JMRI/New_Profile.jmri/ [main]
2024-09-04T10:51:04,925 util.FileUtilSupport ? ? ? ? ? ? ? ? ?INFO ?- File path settings: is /Users/enduser/Library/Preferences/JMRI/ [main]
2024-09-04T10:51:04,925 util.FileUtilSupport ? ? ? ? ? ? ? ? ?INFO ?- File path home: is /Users/enduser/ [main]
2024-09-04T10:51:04,926 util.FileUtilSupport ? ? ? ? ? ? ? ? ?INFO ?- File path scripts: is /Applications/JMRI/jython/ [main]
2024-09-04T10:51:05,515 dccpp.DCCppCommandStation ? ? ? ? ? ? INFO ?- Station Type set to 'DCC-EX' [AWT-EventQueue-0]
2024-09-04T10:51:05,515 dccpp.DCCppCommandStation ? ? ? ? ? ? INFO ?- Build set to '9db6d36' [AWT-EventQueue-0]
2024-09-04T10:51:05,516 dccpp.DCCppCommandStation ? ? ? ? ? ? INFO ?- Version set to '4.0.1' [AWT-EventQueue-0]
2024-09-04T10:51:05,901 PanelPro.PanelPro ? ? ? ? ? ? ? ? ? ? INFO ?- Main initialization done [main]
2024-09-04T10:51:51,293 permission.DefaultUser ? ? ? ? ? ? ? ?WARN ?- User Guest has not permission Store table content and panels file [AWT-EventQueue-0]
2024-09-04T10:51:58,170 configurexml.StoreAndCompare ? ? ? ? ?WARN ?- Match failed in StoreAndCompare: [AWT-EventQueue-0]
2024-09-04T10:51:58,171 configurexml.StoreAndCompare ? ? ? ? ?WARN ?- ? ? file1:line 10: " ?<sensors class="jmri.jmrix.dccpp.configurexml.DCCppSensorManagerXml">" [AWT-EventQueue-0]
2024-09-04T10:51:58,171 configurexml.StoreAndCompare ? ? ? ? ?WARN ?- ? ? file2:line 10: " ?<sensors class="jmri.jmrix.internal.configurexml.InternalSensorManagerXml">" [AWT-EventQueue-0]
2024-09-04T10:51:58,171 configurexml.StoreAndCompare ? ? ? ? ?WARN ?- ? comparing file1:"/Users/enduser/Library/Preferences/JMRI/New_Profile.jmri/Pi_DCC_EX.xml" [AWT-EventQueue-0]
2024-09-04T10:51:58,171 configurexml.StoreAndCompare ? ? ? ? ?WARN ?- ? ? ? ? ?to file2:"/var/folders/st/y6_9p_yj0xvcmvfxzz53p8q80000gn/T/8f1a16a6-378a-4baf-9b16-517d65115afc.xml" [AWT-EventQueue-0]
2024-09-04T10:52:00,799 permission.DefaultUser ? ? ? ? ? ? ? ?WARN ?- User Guest has not permission Store table content and panels file [AWT-EventQueue-0]
2024-09-04T10:52:04,195 managers.DefaultShutDownManager ? ? ? INFO ?- Normal termination complete [Thread-32]
John ?Bauchiero
- D&H Model Railroad
-?NCE PH-Pro & PowerCab, Pi4b, DCC-EX
- JMRI current test version 5.9.2
On Sep 3, 2024, at 11:26?PM, Dave Sand via ??< ds@...> wrote:
John,
After you get the error upload the session.log file located at /Users/<username>/Library/Preferences/JMRI/log.
Dave Sand
----- Original message -----
Subject: [jmriusers] Mac Java 17 upgrade caused permission issue
Date: Tuesday, September 03, 2024 8:57 PM
My railroad's Pi/JMRI computer uses Java 17 included with MSteveTodd¡¯s compilation. That works with no problems. This is noted as a reference only.
The issue I¡¯m having is a Permission Denied issue when saving the PanelPro .xml file(s), I use a MacBook for developing JMRI files, which was using Java 11 JDK. With 5.9.x uses Java 17 and future releases will require 17, I upgraded to Java 17 JRE. and removed the zulu-11.jdk directory as per the JMRI method. It upgraded without any problems and worked as expected, maybe even faster? Re-boot done between each change.?
After adding AZUL 17 JRE and removing the 11 directory when quitting JMRI and saving changes a dialog box pops up with Panel Pro ¡°Permission Denied¡±. Clicking OK allows the program to close, as expected. Upon re-starting JMRI the changes saved are there, as expected. No matter if I replace Java 11 as long as Java 17 exists the the error exists.
Question: Did I do something wrong during the upgrade process? ?Or is this a bug with the Mac JMRI version? ?Or is it a Zulu Java 17 issue? ? ?
John ?Bauchiero
- D&H Model Railroad
-?NCE PH-Pro & PowerCab, Pi4b, DCC-EX
- JMRI current test version 5.9.2
|
use translator
--
Petr ?¨ªdlo
Czech Republic
|
John,
Edit?/Users/enduser/Library/Preferences/JMRI/.permissions.xml
? <Settings>
??? <Enabled>no</Enabled>
? </Settings>
Change Enabled to no.
For details about the new Permissions feature in JMRI, see?
Dave Sand
----- Original message -----
Subject: Re: [jmriusers] Mac Java 17 upgrade caused permission issue
Date: Wednesday, September 04, 2024 10:13 AM
There are other errors in the log of my own doing. The significant line(s) ?highlighted (user Guest has not permission). My question is how and what changed my permission? Is it because I am using a patched 5.9.2?
2024-09-04T10:51:01,624 util.Log4JUtil ? ? ? ? ? ? ? ? ? ? ? ?INFO ?- * JMRI log ** [main]
2024-09-04T10:51:01,629 util.Log4JUtil ? ? ? ? ? ? ? ? ? ? ? ?INFO ?- This log is stored in file: /Users/enduser/Library/Preferences/JMRI/log/session.log [main]
2024-09-04T10:51:01,630 util.Log4JUtil ? ? ? ? ? ? ? ? ? ? ? ?INFO ?- This log is appended to file: /Users/enduser/Library/Preferences/JMRI/log/messages.log [main]
2024-09-04T10:51:01,632 apps.Apps ? ? ? ? ? ? ? ? ? ? ? ? ? ? INFO ?- PanelPro version 5.9.2plus+jenkins+20240815T0713Z+Rb2a88be98b starts under Java 17.0.12 on Mac OS X aarch64 v14.6.1 at Wed Sep 04 10:51:01 EDT 2024 [main]
2024-09-04T10:51:02,159 permission.DefaultPermissionManager ? INFO ?- Permission file: /Users/enduser/Library/Preferences/JMRI/.permissions.xml [main]
2024-09-04T10:51:02,162 permission.DefaultPermissionManager ? INFO ?- Permission system is enabled: yes [main]
2024-09-04T10:51:03,773 apps.Apps ? ? ? ? ? ? ? ? ? ? ? ? ? ? INFO ?- Starting with profile New_Profile.3f6317b2 [main]
2024-09-04T10:51:03,793 node.NodeIdentity ? ? ? ? ? ? ? ? ? ? INFO ?- Using aeff0b20-6eef-11e9-8000-9801a7bc11cb as the JMRI storage identity for profile id 3f6317b2 [AWT-EventQueue-0]
2024-09-04T10:51:03,852 dccpp.DCCppInitializationManager ? ? ?INFO ?- DCC++ Initialization Complete [main]
2024-09-04T10:51:03,970 roster.Roster ? ? ? ? ? ? ? ? ? ? ? ? INFO ?- Reading roster file with rootFromName(/Users/enduser/Library/Preferences/JMRI/roster.xml) [main]
2024-09-04T10:51:04,051 withrottle.FacelessServer ? ? ? ? ? ? INFO ?- Published ZeroConf service for 'my jmri railroad._withrottle._tcp.local.' on 192.168.1.33:12090 [WiThrottleServer]
2024-09-04T10:51:04,053 withrottle.FacelessServer ? ? ? ? ? ? INFO ?- Creating new WiThrottle DeviceServer(socket) on port 12090, waiting for incoming connection... [WiThrottleServer]
2024-09-04T10:51:04,187 startup.PerformFileModel ? ? ? ? ? ? ?INFO ?- Loading file /Users/enduser/Library/Preferences/JMRI/New_Profile.jmri/Pi_DCC_EX.xml [main]
2024-09-04T10:51:04,925 util.FileUtilSupport ? ? ? ? ? ? ? ? ?INFO ?- File path program: is /Applications/JMRI/ [main]
2024-09-04T10:51:04,925 util.FileUtilSupport ? ? ? ? ? ? ? ? ?INFO ?- File path preference: is /Users/enduser/Library/Preferences/JMRI/ [main]
2024-09-04T10:51:04,925 util.FileUtilSupport ? ? ? ? ? ? ? ? ?INFO ?- File path profile: is /Users/enduser/Library/Preferences/JMRI/New_Profile.jmri/ [main]
2024-09-04T10:51:04,925 util.FileUtilSupport ? ? ? ? ? ? ? ? ?INFO ?- File path settings: is /Users/enduser/Library/Preferences/JMRI/ [main]
2024-09-04T10:51:04,925 util.FileUtilSupport ? ? ? ? ? ? ? ? ?INFO ?- File path home: is /Users/enduser/ [main]
2024-09-04T10:51:04,926 util.FileUtilSupport ? ? ? ? ? ? ? ? ?INFO ?- File path scripts: is /Applications/JMRI/jython/ [main]
2024-09-04T10:51:05,515 dccpp.DCCppCommandStation ? ? ? ? ? ? INFO ?- Station Type set to 'DCC-EX' [AWT-EventQueue-0]
2024-09-04T10:51:05,515 dccpp.DCCppCommandStation ? ? ? ? ? ? INFO ?- Build set to '9db6d36' [AWT-EventQueue-0]
2024-09-04T10:51:05,516 dccpp.DCCppCommandStation ? ? ? ? ? ? INFO ?- Version set to '4.0.1' [AWT-EventQueue-0]
2024-09-04T10:51:05,901 PanelPro.PanelPro ? ? ? ? ? ? ? ? ? ? INFO ?- Main initialization done [main]
2024-09-04T10:51:51,293 permission.DefaultUser ? ? ? ? ? ? ? ?WARN ?- User Guest has not permission Store table content and panels file [AWT-EventQueue-0]
2024-09-04T10:51:58,170 configurexml.StoreAndCompare ? ? ? ? ?WARN ?- Match failed in StoreAndCompare: [AWT-EventQueue-0]
2024-09-04T10:51:58,171 configurexml.StoreAndCompare ? ? ? ? ?WARN ?- ? ? file1:line 10: " ?<sensors class="jmri.jmrix.dccpp.configurexml.DCCppSensorManagerXml">" [AWT-EventQueue-0]
2024-09-04T10:51:58,171 configurexml.StoreAndCompare ? ? ? ? ?WARN ?- ? ? file2:line 10: " ?<sensors class="jmri.jmrix.internal.configurexml.InternalSensorManagerXml">" [AWT-EventQueue-0]
2024-09-04T10:51:58,171 configurexml.StoreAndCompare ? ? ? ? ?WARN ?- ? comparing file1:"/Users/enduser/Library/Preferences/JMRI/New_Profile.jmri/Pi_DCC_EX.xml" [AWT-EventQueue-0]
2024-09-04T10:51:58,171 configurexml.StoreAndCompare ? ? ? ? ?WARN ?- ? ? ? ? ?to file2:"/var/folders/st/y6_9p_yj0xvcmvfxzz53p8q80000gn/T/8f1a16a6-378a-4baf-9b16-517d65115afc.xml" [AWT-EventQueue-0]
2024-09-04T10:52:00,799 permission.DefaultUser ? ? ? ? ? ? ? ?WARN ?- User Guest has not permission Store table content and panels file [AWT-EventQueue-0]
2024-09-04T10:52:04,195 managers.DefaultShutDownManager ? ? ? INFO ?- Normal termination complete [Thread-32]
John ?Bauchiero
- D&H Model Railroad
-?NCE PH-Pro & PowerCab, Pi4b, DCC-EX
- JMRI current test version 5.9.2
On Sep 3, 2024, at 11:26?PM, Dave Sand via groups.io <ds@...> wrote:
John,
After you get the error upload the session.log file located at /Users/<username>/Library/Preferences/JMRI/log.
Dave Sand
----- Original message -----
Subject: [jmriusers] Mac Java 17 upgrade caused permission issue
Date: Tuesday, September 03, 2024 8:57 PM
My railroad's Pi/JMRI computer uses Java 17 included with MSteveTodd¡¯s compilation. That works with no problems. This is noted as a reference only.
The issue I¡¯m having is a Permission Denied issue when saving the PanelPro .xml file(s), I use a MacBook for developing JMRI files, which was using Java 11 JDK. With 5.9.x uses Java 17 and future releases will require 17, I upgraded to Java 17 JRE. and removed the zulu-11.jdk directory as per the JMRI method. It upgraded without any problems and worked as expected, maybe even faster? Re-boot done between each change.?
After adding AZUL 17 JRE and removing the 11 directory when quitting JMRI and saving changes a dialog box pops up with Panel Pro ¡°Permission Denied¡±. Clicking OK allows the program to close, as expected. Upon re-starting JMRI the changes saved are there, as expected. No matter if I replace Java 11 as long as Java 17 exists the the error exists.
Question: Did I do something wrong during the upgrade process? ?Or is this a bug with the Mac JMRI version? ?Or is it a Zulu Java 17 issue? ? ?
John ?Bauchiero
- D&H Model Railroad
-?NCE PH-Pro & PowerCab, Pi4b, DCC-EX
- JMRI current test version 5.9.2
|
There are other errors in the log of my own doing. The significant line(s) ?highlighted (user Guest has not permission). My question is how and what changed my permission? Is it because I am using a patched 5.9.2?
2024-09-04T10:51:01,624 util.Log4JUtil ? ? ? ? ? ? ? ? ? ? ? ?INFO ?- * JMRI log ** [main] 2024-09-04T10:51:01,629 util.Log4JUtil ? ? ? ? ? ? ? ? ? ? ? ?INFO ?- This log is stored in file: /Users/enduser/Library/Preferences/JMRI/log/session.log [main] 2024-09-04T10:51:01,630 util.Log4JUtil ? ? ? ? ? ? ? ? ? ? ? ?INFO ?- This log is appended to file: /Users/enduser/Library/Preferences/JMRI/log/messages.log [main] 2024-09-04T10:51:01,632 apps.Apps ? ? ? ? ? ? ? ? ? ? ? ? ? ? INFO ?- PanelPro version 5.9.2plus+jenkins+20240815T0713Z+Rb2a88be98b starts under Java 17.0.12 on Mac OS X aarch64 v14.6.1 at Wed Sep 04 10:51:01 EDT 2024 [main] 2024-09-04T10:51:02,159 permission.DefaultPermissionManager ? INFO ?- Permission file: /Users/enduser/Library/Preferences/JMRI/.permissions.xml [main] 2024-09-04T10:51:02,162 permission.DefaultPermissionManager ? INFO ?- Permission system is enabled: yes [main] 2024-09-04T10:51:03,773 apps.Apps ? ? ? ? ? ? ? ? ? ? ? ? ? ? INFO ?- Starting with profile New_Profile.3f6317b2 [main] 2024-09-04T10:51:03,793 node.NodeIdentity ? ? ? ? ? ? ? ? ? ? INFO ?- Using aeff0b20-6eef-11e9-8000-9801a7bc11cb as the JMRI storage identity for profile id 3f6317b2 [AWT-EventQueue-0] 2024-09-04T10:51:03,852 dccpp.DCCppInitializationManager ? ? ?INFO ?- DCC++ Initialization Complete [main] 2024-09-04T10:51:03,970 roster.Roster ? ? ? ? ? ? ? ? ? ? ? ? INFO ?- Reading roster file with rootFromName(/Users/enduser/Library/Preferences/JMRI/roster.xml) [main] 2024-09-04T10:51:04,051 withrottle.FacelessServer ? ? ? ? ? ? INFO ?- Published ZeroConf service for 'my jmri railroad._withrottle._tcp.local.' on 192.168.1.33:12090 [WiThrottleServer] 2024-09-04T10:51:04,053 withrottle.FacelessServer ? ? ? ? ? ? INFO ?- Creating new WiThrottle DeviceServer(socket) on port 12090, waiting for incoming connection... [WiThrottleServer] 2024-09-04T10:51:04,187 startup.PerformFileModel ? ? ? ? ? ? ?INFO ?- Loading file /Users/enduser/Library/Preferences/JMRI/New_Profile.jmri/Pi_DCC_EX.xml [main] 2024-09-04T10:51:04,925 util.FileUtilSupport ? ? ? ? ? ? ? ? ?INFO ?- File path program: is /Applications/JMRI/ [main] 2024-09-04T10:51:04,925 util.FileUtilSupport ? ? ? ? ? ? ? ? ?INFO ?- File path preference: is /Users/enduser/Library/Preferences/JMRI/ [main] 2024-09-04T10:51:04,925 util.FileUtilSupport ? ? ? ? ? ? ? ? ?INFO ?- File path profile: is /Users/enduser/Library/Preferences/JMRI/New_Profile.jmri/ [main] 2024-09-04T10:51:04,925 util.FileUtilSupport ? ? ? ? ? ? ? ? ?INFO ?- File path settings: is /Users/enduser/Library/Preferences/JMRI/ [main] 2024-09-04T10:51:04,925 util.FileUtilSupport ? ? ? ? ? ? ? ? ?INFO ?- File path home: is /Users/enduser/ [main] 2024-09-04T10:51:04,926 util.FileUtilSupport ? ? ? ? ? ? ? ? ?INFO ?- File path scripts: is /Applications/JMRI/jython/ [main] 2024-09-04T10:51:05,515 dccpp.DCCppCommandStation ? ? ? ? ? ? INFO ?- Station Type set to 'DCC-EX' [AWT-EventQueue-0] 2024-09-04T10:51:05,515 dccpp.DCCppCommandStation ? ? ? ? ? ? INFO ?- Build set to '9db6d36' [AWT-EventQueue-0] 2024-09-04T10:51:05,516 dccpp.DCCppCommandStation ? ? ? ? ? ? INFO ?- Version set to '4.0.1' [AWT-EventQueue-0] 2024-09-04T10:51:05,901 PanelPro.PanelPro ? ? ? ? ? ? ? ? ? ? INFO ?- Main initialization done [main] 2024-09-04T10:51:51,293 permission.DefaultUser ? ? ? ? ? ? ? ?WARN ?- User Guest has not permission Store table content and panels file [AWT-EventQueue-0] 2024-09-04T10:51:58,170 configurexml.StoreAndCompare ? ? ? ? ?WARN ?- Match failed in StoreAndCompare: [AWT-EventQueue-0] 2024-09-04T10:51:58,171 configurexml.StoreAndCompare ? ? ? ? ?WARN ?- ? ? file1:line 10: " ?<sensors class="jmri.jmrix.dccpp.configurexml.DCCppSensorManagerXml">" [AWT-EventQueue-0] 2024-09-04T10:51:58,171 configurexml.StoreAndCompare ? ? ? ? ?WARN ?- ? ? file2:line 10: " ?<sensors class="jmri.jmrix.internal.configurexml.InternalSensorManagerXml">" [AWT-EventQueue-0] 2024-09-04T10:51:58,171 configurexml.StoreAndCompare ? ? ? ? ?WARN ?- ? comparing file1:"/Users/enduser/Library/Preferences/JMRI/New_Profile.jmri/Pi_DCC_EX.xml" [AWT-EventQueue-0] 2024-09-04T10:51:58,171 configurexml.StoreAndCompare ? ? ? ? ?WARN ?- ? ? ? ? ?to file2:"/var/folders/st/y6_9p_yj0xvcmvfxzz53p8q80000gn/T/8f1a16a6-378a-4baf-9b16-517d65115afc.xml" [AWT-EventQueue-0] 2024-09-04T10:52:00,799 permission.DefaultUser ? ? ? ? ? ? ? ?WARN ?- User Guest has not permission Store table content and panels file [AWT-EventQueue-0] 2024-09-04T10:52:04,195 managers.DefaultShutDownManager ? ? ? INFO ?- Normal termination complete [Thread-32]
John ?Bauchiero
- D&H Model Railroad -?NCE PH-Pro & PowerCab, Pi4b, DCC-EX - JMRI current test version 5.9.2
toggle quoted message
Show quoted text
On Sep 3, 2024, at 11:26?PM, Dave Sand via groups.io <ds@...> wrote:
John,
After you get the error upload the session.log file located at /Users/<username>/Library/Preferences/JMRI/log.
Dave Sand
----- Original message -----
Subject: [jmriusers] Mac Java 17 upgrade caused permission issue
Date: Tuesday, September 03, 2024 8:57 PM
My railroad's Pi/JMRI computer uses Java 17 included with MSteveTodd¡¯s compilation. That works with no problems. This is noted as a reference only.
The issue I¡¯m having is a Permission Denied issue when saving the PanelPro .xml file(s), I use a MacBook for developing JMRI files, which was using Java 11 JDK. With 5.9.x uses Java 17 and future releases will require 17, I upgraded to Java 17 JRE. and removed the zulu-11.jdk directory as per the JMRI method. It upgraded without any problems and worked as expected, maybe even faster? Re-boot done between each change.?
After adding AZUL 17 JRE and removing the 11 directory when quitting JMRI and saving changes a dialog box pops up with Panel Pro ¡°Permission Denied¡±. Clicking OK allows the program to close, as expected. Upon re-starting JMRI the changes saved are there, as expected. No matter if I replace Java 11 as long as Java 17 exists the the error exists.
Question: Did I do something wrong during the upgrade process? ?Or is this a bug with the Mac JMRI version? ?Or is it a Zulu Java 17 issue? ? ?
John ?Bauchiero
- D&H Model Railroad
-?NCE PH-Pro & PowerCab, Pi4b, DCC-EX
- JMRI current test version 5.9.2
|
I've researched many posts about using the "D" command to send a hex packet to the command station. From posts I have read through, it appears that the HEX packet should be a basic or extended NMRA DCC packet. It is my understanding that the data from the command station to the rails is formatted as per the MFGR like digitrax e.g., or DCC EX etc.
?
Is this a basically correct understanding, and is there any way to monitor the "D" command hex packet in the system console?
?
Thanks
?
John Blizman
|
Locked
Re: JMRI 5.8 hangs when opening panels-tables automatically on startup.
#startup
I think the Mac downloads from builds.jmri.org <> should now be OK starting with #2004. Sorry for the trouble. The problem was that our Jython library was so old it was no longer passing some security checks in the signing process. The fix was to update the Jython library from 2.7.2 to 2.7.4. That shouldn¡¯t have any effect on the user experience. It would be great if somebody who¡¯s seeing the original "JMRI 5.8 hangs when opening panels-tables automatically on startup¡± could test one of these and let me know if it¡¯s fixed: Bob On Sep 3, 2024, at 8:06?PM, Fred Dalzell via groups.io <dalzellf@...> wrote:
Peter - I wasn't. Bob had asked to have Gil try a Development build and I was noting that the latest one doesn't work on M1 Mac.
Fred Dalzell
On Sep 3, 2024 at 5:57?PM -0600, Peter Ulvestad via groups.io <ulvestad@...>, wrote:
Fred,
You're hijacking someone else's topic. Please start a new topic for your issue.
--
Peter Ulvestad
¡ª Bob Jacobsen rgj1927@...
|
On 9/4/2024 12:22 AM, Doug Wagner via groups.io wrote: Oh no, not this guy, again?!?! I'm learnin' a lot, but still learnin'!!!
An audio question this time concerning PanelPro. Starting to enter the sounds of the relays when you press the Code Button. I noticed on one YouTube video that was demonstrating PanelPro CTC Panel, that when a signal or turnout lever was turned, it made the signal lever sound, when it was turned. I've only been able to get the turnout or signal lever sound in the Action section to play when the Code Button relay is sounding. Is there something special I need to program to get the turnout or signal lever to sound before pressing the Code Button? What is a "turnout" sound? Do you mean to "squeek" caused by rotating a US&S "Switch" lever? Or do you mean the sequence of relay sounds sent when requesting a Switch position change? What is a "signal" sound? Do you mean to "squeek" caused by rotating a US&S "Signal" lever? Or do you mean the sequence of relay sounds sent when requesting a Signal position change? Typically, for a US&S "Time-coded" CTC, the Office machine's "coding" relays "click" when "coding" a request. OR when "something changes" at a field location. Regards, Billybob
|
Steve,
Thank you for your explanation, that is very helpful.
I plan to use a bit of LogixNG for some of the actions like when I want to back two trains into a yard and start and terminate Dispatches triggered by IR-sensors. This is working nicely.
?
I have not managed to get two trains running reliably on different but continuous Transits so I will definitely experiment with the NoSignal option for Dispatcher.
?
The most challenging part of this is what happens around the one crossing I have on my layout. If two trains are too close on the layout one train will switch the crossing for it's Transit and shortly after the second train will switch the crossing back to satisfy it's Transit. Here I'm also working with LogixNG to get one train to stop for the other before changing the crossing.
Jos
|
Oh no, not this guy, again?!?! I'm learnin' a lot, but still learnin'!!!
An audio question this time concerning PanelPro. Starting to enter the sounds of the relays when you press the Code Button. I noticed on one YouTube video that was demonstrating PanelPro CTC Panel, that when a signal or turnout lever was turned, it made the signal lever sound, when it was turned. I've only been able to get the turnout or signal lever sound in the Action section to play when the Code Button relay is sounding. Is there something special I need to program to get the turnout or signal lever to sound before pressing the Code Button?
?
Thank you.
?
Doug Wagner
Golden Empire Historical & Modeling Society
Bakersfield, California
|
John,
After you get the error upload the session.log file located at /Users/<username>/Library/Preferences/JMRI/log.
Dave Sand
----- Original message -----
Subject: [jmriusers] Mac Java 17 upgrade caused permission issue
Date: Tuesday, September 03, 2024 8:57 PM
My railroad's Pi/JMRI computer uses Java 17 included with MSteveTodd¡¯s compilation. That works with no problems. This is noted as a reference only.
The issue I¡¯m having is a Permission Denied issue when saving the PanelPro .xml file(s), I use a MacBook for developing JMRI files, which was using Java 11 JDK. With 5.9.x uses Java 17 and future releases will require 17, I upgraded to Java 17 JRE. and removed the zulu-11.jdk directory as per the JMRI method. It upgraded without any problems and worked as expected, maybe even faster? Re-boot done between each change.?
After adding AZUL 17 JRE and removing the 11 directory when quitting JMRI and saving changes a dialog box pops up with Panel Pro ¡°Permission Denied¡±. Clicking OK allows the program to close, as expected. Upon re-starting JMRI the changes saved are there, as expected. No matter if I replace Java 11 as long as Java 17 exists the the error exists.
Question: Did I do something wrong during the upgrade process? ?Or is this a bug with the Mac JMRI version? ?Or is it a Zulu Java 17 issue? ? ?
John ?Bauchiero
- D&H Model Railroad
-?NCE PH-Pro & PowerCab, Pi4b, DCC-EX
- JMRI current test version 5.9.2
|
Locked
Re: how do I remove JMRI from my PC running MS Windows
Steve,
Thanks for the clarification. ?I should have said use the Windows control panel to uninstall JMRI.
Dave Sand
----- Original message -----
Subject: Re: [jmriusers] how do I remove JMRI from my PC running MS Windows
Date: Tuesday, September 03, 2024 8:45 PM
On Tue, Sep 3, 2024 at 04:10 PM, Dave Sand wrote:
?
Use the Windows control panel to delete the JMRI install. ?There will normally be a left over JMRI directory at C:\Program Files (x86). ?Manually delete that.
?
Please don't try to "delete" anything via the Control Panel - Uninstall it if you want to remove it. Although AFAIK JMRI itself doesn't create any registry entries, I'm pretty sure the Windows install process does. Simply "deleting" JMRI folders will leave those registry entries behind.
?
Having said that, if you really want to get rid of everything JMRI (Java is totally separate) including user files and registry entries, use an uninstaller such as the .
?
HTH,
Steve
"Breezlys"
|
My railroad's Pi/JMRI computer uses Java 17 included with MSteveTodd¡¯s compilation. That works with no problems. This is noted as a reference only.
The issue I¡¯m having is a Permission Denied issue when saving the PanelPro .xml file(s), I use a MacBook for developing JMRI files, which was using Java 11 JDK. With 5.9.x uses Java 17 and future releases will require 17, I upgraded to Java 17 JRE. and removed the zulu-11.jdk directory as per the JMRI method. It upgraded without any problems and worked as expected, maybe even faster? Re-boot done between each change.?
After adding AZUL 17 JRE and removing the 11 directory when quitting JMRI and saving changes a dialog box pops up with Panel Pro ¡°Permission Denied¡±. Clicking OK allows the program to close, as expected. Upon re-starting JMRI the changes saved are there, as expected. No matter if I replace Java 11 as long as Java 17 exists the the error exists.
Question: Did I do something wrong during the upgrade process? ?Or is this a bug with the Mac JMRI version? ?Or is it a Zulu Java 17 issue? ? ?
John ?Bauchiero
- D&H Model Railroad -?NCE PH-Pro & PowerCab, Pi4b, DCC-EX - JMRI current test version 5.9.2
|
Locked
Re: how do I remove JMRI from my PC running MS Windows
On Tue, Sep 3, 2024 at 04:10 PM, Dave Sand wrote:
?
Use the Windows control panel to delete the JMRI install. ?There will normally be a left over JMRI directory at C:\Program Files (x86). ?Manually delete that.
?
Please don't try to "delete" anything via the Control Panel - Uninstall it if you want to remove it. Although AFAIK JMRI itself doesn't create any registry entries, I'm pretty sure the Windows install process does. Simply "deleting" JMRI folders will leave those registry entries behind.
?
Having said that, if you really want to get rid of everything JMRI (Java is totally separate) including user files and registry entries, use an uninstaller such as the .
?
HTH,
Steve
"Breezlys"
|
Locked
Re: JMRI 5.8 hangs when opening panels-tables automatically on startup.
#startup
Peter - I wasn't. Bob had asked to have Gil try a Development build and I was noting that the latest one doesn't work on M1 Mac.
Fred Dalzell
On Sep 3, 2024 at 5:57?PM -0600, Peter Ulvestad via groups.io <ulvestad@...>, wrote:
Fred,
You're hijacking someone else's topic. Please start a new topic for your issue.
--
Peter Ulvestad
JMRI Users Group Moderator ( https://www.jmri.org )
Tam Valley Group Moderator ( https://tamvalleydepot.com/ )
Sprog-DCC Group Moderator ( http://www.sprog-dcc.co.uk/ )
Edmonton Model Railroad Association ( http://www.emra.club/ )
|
Locked
Re: JMRI 5.8 hangs when opening panels-tables automatically on startup.
#startup
Fred,
You're hijacking someone else's topic. Please start a new topic for your issue.
--
Peter Ulvestad
JMRI Users Group Moderator ( )
Tam Valley Group Moderator ( )
Sprog-DCC Group Moderator ( )
Edmonton Model Railroad Association ( )
|
Locked
Re: JMRI 5.8 hangs when opening panels-tables automatically on startup.
#startup
Oops - they're the same. Package 2001??(Build 2303) fails to launch on M1 Mac.
Fred Dalzell
On Sep 3, 2024 at 5:32?PM -0600, Fred Dalzell via groups.io <dalzellf@...>, wrote:
Bob - Build 2001 fails to launch on M1 Mac.
Fred Dalzell
On Sep 3, 2024 at 4:52?PM -0600, Bob Jacobsen via groups.io <rgj1927@...>, wrote:
Gli
There are development installers that should have a fix for the file-dialog exception here:
https://builds.jmri.org/jenkins/job/development/job/packages/
When you get the chance, could you please try one and let us know whether or not that solved your start-up problem? Thanks
Bob
¡ª
Bob Jacobsen
rgj1927@...
|
Locked
Re: JMRI 5.8 hangs when opening panels-tables automatically on startup.
#startup
Bob - Build 2001 fails to launch on M1 Mac.
Fred Dalzell
On Sep 3, 2024 at 4:52?PM -0600, Bob Jacobsen via groups.io <rgj1927@...>, wrote:
Gli
There are development installers that should have a fix for the file-dialog exception here:
https://builds.jmri.org/jenkins/job/development/job/packages/
When you get the chance, could you please try one and let us know whether or not that solved your start-up problem? Thanks
Bob
¡ª
Bob Jacobsen
rgj1927@...
|
mithrander1972
John Bauchiero
Petr ?¨ªdlo
Bob Jacobsen
Jos Smeele
Doug Wagner
Fred Dalzell
Peter Ulvestad