¿ªÔÆÌåÓý

  1. Jmriusers
  2. Messages
Expanded Topics Messages Polls
Date
Locked Re: Unable to load jmri 4.17.4

 

Every time a new version is released, the various anti malware and anti virus programs think it is contaminated. Hundreds of posts in this forum to that effect. You need to first make sure you are downloading the files from ? then temporarily disable or tell your virus program to ignore the warning about the program. After enough users download it, it gets added to the various programs safe list.

Tom Wilson

Colorado Springs, CO

On Wed, Sep 11, 2019, 9:13 AM MICHAEL PAYNE via Groups.Io <mikepayne1402=[email protected]> wrote:

Yesterday(10th) I was able to install 4.17.4 on one of my Win7 PCs ( I have 4 and 2 laptops.) Today I am continuing to upgrade but I am prevented by my Avast security system. It is telling me that? 4.17.4 is contaminated with FileRepMalware. Your comments will be appreciated.
I'm running Windows 10. Yesterday's download was on a Win 7 PC.
Thanks, Mike.
Locked Unable to load jmri 4.17.4

 

Yesterday(10th) I was able to install 4.17.4 on one of my Win7 PCs ( I have 4 and 2 laptops.) Today I am continuing to upgrade but I am prevented by my Avast security system. It is telling me that? 4.17.4 is contaminated with FileRepMalware. Your comments will be appreciated.
I'm running Windows 10. Yesterday's download was on a Win 7 PC.
Thanks, Mike.
Locked Re: Operations files

 

A folder called "operations" with all your other user files unless you have moved them.

The easiest way to locate your user files is to click on help within JMRI and then click on Locations.

--
Peter Ulvestad

JMRI Users Group Moderator - ( )
Tam Valley Group Moderator - ( )
Sprog-DCC Group Moderator - ( )
Edmonton Model Railroad Association -

Locked Re: NCE USB Help

[email protected]
 

I did not see any LED activity with the first test.

The power cab working great.?

With the second test i noticed a quick flash when i plugged in the cable from the PowerCab. But no more activity.

Here are my logs for both 19200 and 9600 baudrate.

2019-09-11 10:59:03,298 util.Log4JUtil? ? ? ? ? ? ? ? ? ? ? ? INFO? - * JMRI log ** [main]

2019-09-11 10:59:03,310 util.Log4JUtil? ? ? ? ? ? ? ? ? ? ? ? INFO? - This log is appended to file: C:\Users\Heavy\JMRI\log\messages.log [main]

2019-09-11 10:59:03,310 util.Log4JUtil? ? ? ? ? ? ? ? ? ? ? ? INFO? - This log is stored in file: C:\Users\Heavy\JMRI\log\session.log [main]

2019-09-11 10:59:03,321 apps.AppsBase? ? ? ? ? ? ? ? ? ? ? ? ?INFO? - DecoderPro version 4.16+R6f9aced starts under Java 1.8.0_45 on Windows 8.1 amd64 v6.3 at Wed Sep 11 10:59:03 EDT 2019 [main]

2019-09-11 10:59:03,527 gui3.Apps3? ? ? ? ? ? ? ? ? ? ? ? ? ? INFO? - Starting with profile My_JMRI_Railroad.3f4675c3 [main]

2019-09-11 10:59:03,795 node.NodeIdentity? ? ? ? ? ? ? ? ? ? ?INFO? - Using jmri-kYhD5Lo3uvljafAGMxHvlr-3f4675c3 as the JMRI storage identity for profile id 3f4675c3 [AWT-EventQueue-0]

2019-09-11 10:59:03,910 xml.AbstractSerialConnectionConfigXml INFO? - Starting to connect for "NCE" [main]

2019-09-11 10:59:04,360 usbdriver.UsbDriverAdapter? ? ? ? ? ? INFO? - NCE USB COM10 port opened at 19200 baud [main]

2019-09-11 10:59:04,652 util.FileUtilSupport? ? ? ? ? ? ? ? ? INFO? - File path program: is C:\Program Files (x86)\JMRI\ [main]

2019-09-11 10:59:04,652 util.FileUtilSupport? ? ? ? ? ? ? ? ? INFO? - File path preference: is C:\Users\Heavy\JMRI\My_JMRI_Railroad.jmri\ [main]

2019-09-11 10:59:04,652 util.FileUtilSupport? ? ? ? ? ? ? ? ? INFO? - File path profile: is C:\Users\Heavy\JMRI\My_JMRI_Railroad.jmri\ [main]

2019-09-11 10:59:04,653 util.FileUtilSupport? ? ? ? ? ? ? ? ? INFO? - File path settings: is C:\Users\Heavy\JMRI\ [main]

2019-09-11 10:59:04,653 util.FileUtilSupport? ? ? ? ? ? ? ? ? INFO? - File path home: is C:\Users\Heavy\ [main]

2019-09-11 10:59:04,653 util.FileUtilSupport? ? ? ? ? ? ? ? ? INFO? - File path scripts: is C:\Program Files (x86)\JMRI\jython\ [main]

2019-09-11 10:59:14,465 jmrix.AbstractMRTrafficController? ? ?WARN? - Timeout on reply to message: AA consecutive timeouts = 0 in nce.NceTrafficController [nce.NceTrafficController Transmit thread]

2019-09-11 10:59:14,566 nce.NceConnectionStatus? ? ? ? ? ? ? ?WARN? - Incorrect or no response from NCE command station [nce.NceTrafficController Transmit thread]

?
Now? 9600
2019-09-11 10:59:54,841 util.Log4JUtil? ? ? ? ? ? ? ? ? ? ? ? INFO? - * JMRI log ** [main]
2019-09-11 10:59:54,852 util.Log4JUtil? ? ? ? ? ? ? ? ? ? ? ? INFO? - This log is appended to file: C:\Users\Heavy\JMRI\log\messages.log [main]
2019-09-11 10:59:54,853 util.Log4JUtil? ? ? ? ? ? ? ? ? ? ? ? INFO? - This log is stored in file: C:\Users\Heavy\JMRI\log\session.log [main]
2019-09-11 10:59:54,864 apps.AppsBase? ? ? ? ? ? ? ? ? ? ? ? ?INFO? - DecoderPro version 4.16+R6f9aced starts under Java 1.8.0_45 on Windows 8.1 amd64 v6.3 at Wed Sep 11 10:59:54 EDT 2019 [main]
2019-09-11 10:59:55,066 gui3.Apps3? ? ? ? ? ? ? ? ? ? ? ? ? ? INFO? - Starting with profile My_JMRI_Railroad.3f4675c3 [main]
2019-09-11 10:59:55,334 node.NodeIdentity? ? ? ? ? ? ? ? ? ? ?INFO? - Using jmri-kYhD5Lo3uvljafAGMxHvlr-3f4675c3 as the JMRI storage identity for profile id 3f4675c3 [AWT-EventQueue-0]
2019-09-11 10:59:55,447 xml.AbstractSerialConnectionConfigXml INFO? - Starting to connect for "NCE" [main]
2019-09-11 10:59:55,825 usbdriver.UsbDriverAdapter? ? ? ? ? ? INFO? - NCE USB COM10 port opened at 9600 baud [main]
2019-09-11 10:59:56,120 util.FileUtilSupport? ? ? ? ? ? ? ? ? INFO? - File path program: is C:\Program Files (x86)\JMRI\ [main]
2019-09-11 10:59:56,121 util.FileUtilSupport? ? ? ? ? ? ? ? ? INFO? - File path preference: is C:\Users\Heavy\JMRI\My_JMRI_Railroad.jmri\ [main]
2019-09-11 10:59:56,121 util.FileUtilSupport? ? ? ? ? ? ? ? ? INFO? - File path profile: is C:\Users\Heavy\JMRI\My_JMRI_Railroad.jmri\ [main]
2019-09-11 10:59:56,121 util.FileUtilSupport? ? ? ? ? ? ? ? ? INFO? - File path settings: is C:\Users\Heavy\JMRI\ [main]
2019-09-11 10:59:56,122 util.FileUtilSupport? ? ? ? ? ? ? ? ? INFO? - File path home: is C:\Users\Heavy\ [main]
2019-09-11 10:59:56,122 util.FileUtilSupport? ? ? ? ? ? ? ? ? INFO? - File path scripts: is C:\Program Files (x86)\JMRI\jython\ [main]
2019-09-11 11:00:05,931 jmrix.AbstractMRTrafficController? ? ?WARN? - Timeout on reply to message: AA consecutive timeouts = 0 in nce.NceTrafficController [nce.NceTrafficController Transmit thread]
2019-09-11 11:00:06,031 nce.NceConnectionStatus? ? ? ? ? ? ? ?WARN? - Incorrect or no response from NCE command station [nce.NceTrafficController Transmit thread]
I don't see a version report. that can't be good!?
I did not see any LED Activity with these test.
?
Locked Re: Tutorial #operationspro

 

I learned quite a bit by going on YouTube and searching ¡®JMRI Operations¡¯. There are quite a few videos, some much better than others.
--
Mike Heintzman
Modeling the P&PU since 1953
Locked Operations files

 

Hi All, I have transferred my JMRI files across to my Rasberry Pi but
cannot seem find the operations file for my Wagons, can anyone tell me
where to find them on my win10 machine.
Thank you
Brian
Locked Re: Complete Raspberry PI source question

 

Running with the Pi 3B+.? ?I have a heat sink on mine and noticed it running hot so I added a fan on the case.? I have another 3B+ runing Retropie for games.? Dont have to use a fan on it.? I'm assuming it is JMRI looking at all the SML masts and logix constantly causing the heat build up.

Roger
Locked Re: Complete Raspberry PI source question

 

Bob:

This is the link I used to try to reduce the temps on my very early score of a Pi4...



Worked, but I also added heat sinks and fan, a Pi3 case kit no longer available at my local Micro Center.

As far as the fix... I don't know if that's included in the large update I saw last week checking the two display issues that appeared here.

Jim Albanowski
Locked Re: Complete Raspberry PI source question

 

No overheat issues on the Pi4???? I have been holding off given? the buzz on the forums about the thermal issues.

Stretch is a known no-go on the Pi4+? https://raspberrypi.stackexchange.com/questions/101353/can-i-run-raspbian-stretch-on-pi-4
Locked Re: OpenLCB Fast Clock

 

Thanks Stuart.

I have just rewritten the software in my current LCC hardware clock to use the draft time protocol.? I can use a minute change watcher to send the info but as 4.14 and 4.17 release notes indicated the feature was available I wanted to make sure I wasn't missing something that was required to provoke the time broadcasts into action.

Regards
Nom?
Locked Re: HTTPS?

 

Thanks Matt
John
Locked Re: Complete Raspberry PI source question

 

¿ªÔÆÌåÓý

Don

?

The autodetect mode of Steve Todd¡¯s RPi-JMRI image can only detect the DCC system interface, not the command station type, and has a ¡°DCS100 (Chief)¡± command station as default in the profile ¡°LocoBuffer-USB¡± associated with Digitrax system. Open PanelPro, then select from the menu ¡®Edit¡¯ ¨C ¡®Preferences¡¯. Ensure the command station type setting (¡®Connections¡¯ in left window, tab ¡®Loconet¡¯) matches your DCS51.

?

To include commands for execution during each boot of the Pi (f.e. the xset commands in your case), include them in the file ¡°/etc/rc.local¡± at bottom just above the line ¡°exit0¡± (under the line ¡°iptables-restore < /etc/iptables.ipv4.nat¡±). This can be done with the command

sudo leafpad /etc/rc.local

Using the menu of leafpad, ¡°Save¡± the file and to quit this editor.

Alternatively, you can use the ¡°nano¡± text editor ¨C which ever you prefer.

?

?

Daniel Sieber

Zurich, Switzerland

?
Locked Re: NCE USB Help

 

Luke,

On 11 Sep 2019, at 12:49 PM, luketheeminer via Groups.Io <luketheeminer@...> wrote:

Still doesn't work lol! Does not work on 19200 baud either.
When i select the device in device manager it is named (COM10) but in location says Port_#0004.Hub_#0002.
Thanks again Luke B.
The tests have shown that it's not simply a baud rate issue. Make sure the baud rate is back to 19200 to match the jumpers.

Did you notice any LED activity (either one) during the tests? Please report anything you see.

The next test sounds bizarre, but will help diagnose the next likely problem - lack of 12V power to the microprocessor.

- Disconnect the NCE USB from its cab bus cable.
- Power up the DCC system and ensure the Power Cab is illuminated (working).
- Unplug the Power Cab from the end of its flat cable and put the Power Cab away (on the bench, in a drawer...).
- Plug the NCE USB into the floating end of the flat cable. We know that cable had 12V power a few seconds before (otherwise the Power Cab wouldn't have Illuminated).
- Start JMRI and send us the log. We should see a version report. Don't try anything else or the NCE USB will lock up - Cab Bus LED will stick on.
- Observe and report any LED activity at any stage.
- If you don't see any version report (it should be V7.3.7 with a V7 USB with all jumpers on), you could try the other baud rate...

Dave in Australia
Locked Re: Complete Raspberry PI source question

Don Cummings
 

Another issue.? Is there a way to make the xset cmds a permanent setting.? It appears i need to set these each time i boot up.

Don

On Mon, Sep 2, 2019 at 7:23 PM Don Cummings via Groups.Io <dacum47=[email protected]> wrote:
Performed an update to the pi by connecting an ethernet cable to it and them ran the suggested xset commands.? I also installed xscreensaver but removed it when the screens started to display random images.? I do not want the screens to go to "sleep" at all and remain up during the entire session as this is the only feasible way to throw turnouts on the layout, cannot rely on the operators to remember the switch number to throw from the throttle.
.
The xset commands did the trick.? Its been sitting idle for the last 2 hours and the screens have not blanked.

Thanks for the help guys, I appreciate it.? Time to install these at the club.

Don

On Mon, Sep 2, 2019 at 12:05 PM Don Cummings via Groups.Io <dacum47=[email protected]> wrote:
Thanks to all for the suggestions. I Will give them a try and report back.

Don

On Sat, Aug 31, 2019 at 10:07 AM Steve Spence <greentrust@...> wrote:
You absolutely can have both wired and wifi running at same time, but only one can have a default route. I run mine as a wifi hotspot with ethernet uplink.

Steve Spence, KK4HFJ



On Sat, Aug 31, 2019 at 7:59 PM jimalbanowski <jimalbanowski@...> wrote:
Gentlemen:

No... RPi-JMRI can be running it's WiFi server and have a wired ethernet
connection at the same time. It's kinda cool the WiThrottle server pane
shows both addresses...? I would quit out of JMRI though...

When I posted on? my "fix" of the two displays problem that's indeed
what I did.

It is true however that if you've built your own Pi cinfig running JMRI
connecting to the "house" WiFi using the Pi WiFi connection you'll not
need the wired.

Jim Albanowski
Locked Re: Complete Raspberry PI source question

Don Cummings
 

It was a bad connection in my wiring. The switch servo works good using the loconet switch LT1 with the Pi.? Please ignore the previous post.

Control both from the panel and the Zephyr.? Now to test it at the club using a DCS 100 and a slew of switch motors.

Don
Locked Re: NCE USB Help

[email protected]
 

Alright so i think i? have successfully re installed the driver. The comport now shows up as 10 and i have changed to port 10 in decoder pro preferences.??

Here is my log?

2019-09-10 22:45:36,071 util.Log4JUtil? ? ? ? ? ? ? ? ? ? ? ? INFO? - * JMRI log ** [main]

2019-09-10 22:45:36,083 util.Log4JUtil? ? ? ? ? ? ? ? ? ? ? ? INFO? - This log is appended to file: C:\Users\Heavy\JMRI\log\messages.log [main]

2019-09-10 22:45:36,083 util.Log4JUtil? ? ? ? ? ? ? ? ? ? ? ? INFO? - This log is stored in file: C:\Users\Heavy\JMRI\log\session.log [main]

2019-09-10 22:45:36,095 apps.AppsBase? ? ? ? ? ? ? ? ? ? ? ? ?INFO? - DecoderPro version 4.16+R6f9aced starts under Java 1.8.0_45 on Windows 8.1 amd64 v6.3 at Tue Sep 10 22:45:36 EDT 2019 [main]

2019-09-10 22:45:36,303 gui3.Apps3? ? ? ? ? ? ? ? ? ? ? ? ? ? INFO? - Starting with profile My_JMRI_Railroad.3f4675c3 [main]

2019-09-10 22:45:36,572 node.NodeIdentity? ? ? ? ? ? ? ? ? ? ?INFO? - Using jmri-kYhD5Lo3uvljafAGMxHvlr-3f4675c3 as the JMRI storage identity for profile id 3f4675c3 [AWT-EventQueue-0]

2019-09-10 22:45:36,694 xml.AbstractSerialConnectionConfigXml INFO? - Starting to connect for "NCE" [main]

2019-09-10 22:45:37,151 usbdriver.UsbDriverAdapter? ? ? ? ? ? INFO? - NCE USB COM10 port opened at 9600 baud [main]

2019-09-10 22:45:37,458 util.FileUtilSupport? ? ? ? ? ? ? ? ? INFO? - File path program: is C:\Program Files (x86)\JMRI\ [main]

2019-09-10 22:45:37,459 util.FileUtilSupport? ? ? ? ? ? ? ? ? INFO? - File path preference: is C:\Users\Heavy\JMRI\My_JMRI_Railroad.jmri\ [main]

2019-09-10 22:45:37,459 util.FileUtilSupport? ? ? ? ? ? ? ? ? INFO? - File path profile: is C:\Users\Heavy\JMRI\My_JMRI_Railroad.jmri\ [main]

2019-09-10 22:45:37,459 util.FileUtilSupport? ? ? ? ? ? ? ? ? INFO? - File path settings: is C:\Users\Heavy\JMRI\ [main]

2019-09-10 22:45:37,460 util.FileUtilSupport? ? ? ? ? ? ? ? ? INFO? - File path home: is C:\Users\Heavy\ [main]

2019-09-10 22:45:37,460 util.FileUtilSupport? ? ? ? ? ? ? ? ? INFO? - File path scripts: is C:\Program Files (x86)\JMRI\jython\ [main]

2019-09-10 22:45:47,258 jmrix.AbstractMRTrafficController? ? ?WARN? - Timeout on reply to message: AA consecutive timeouts = 0 in nce.NceTrafficController [nce.NceTrafficController Transmit thread]

2019-09-10 22:45:47,358 nce.NceConnectionStatus? ? ? ? ? ? ? ?WARN? - Incorrect or no response from NCE command station [nce.NceTrafficController Transmit thread]

?
Still doesn't work lol! Does not work on 19200 baud either.?
When i select the device in device manager it is named (COM10) but in location says?Port_#0004.Hub_#0002.
Thanks again Luke B.
Locked Re: OpenLCB Fast Clock

 

Nom,

There are few known bugs with the implementation.? This is one of them.? There is a hardware fast clock in development that will work with the JMRI fast clock over OpenLCB/LCC.? I'll ping the developer that worked on this feature to comment.

Thanks,
Stuart
Locked Re: NCE USB Help

[email protected]
 

No problem Dave! Thank you for repsonding.?

Here is my 9600 baud JMRI log?

2019-09-10 22:25:50,223 util.Log4JUtil? ? ? ? ? ? ? ? ? ? ? ? INFO? - * JMRI log ** [main]

2019-09-10 22:25:50,234 util.Log4JUtil? ? ? ? ? ? ? ? ? ? ? ? INFO? - This log is appended to file: C:\Users\Heavy\JMRI\log\messages.log [main]

2019-09-10 22:25:50,235 util.Log4JUtil? ? ? ? ? ? ? ? ? ? ? ? INFO? - This log is stored in file: C:\Users\Heavy\JMRI\log\session.log [main]

2019-09-10 22:25:50,246 apps.AppsBase? ? ? ? ? ? ? ? ? ? ? ? ?INFO? - DecoderPro version 4.16+R6f9aced starts under Java 1.8.0_45 on Windows 8.1 amd64 v6.3 at Tue Sep 10 22:25:50 EDT 2019 [main]

2019-09-10 22:25:50,472 gui3.Apps3? ? ? ? ? ? ? ? ? ? ? ? ? ? INFO? - Starting with profile My_JMRI_Railroad.3f4675c3 [main]

2019-09-10 22:25:50,758 node.NodeIdentity? ? ? ? ? ? ? ? ? ? ?INFO? - Using jmri-kYhD5Lo3uvljafAGMxHvlr-3f4675c3 as the JMRI storage identity for profile id 3f4675c3 [AWT-EventQueue-0]

2019-09-10 22:25:50,877 xml.AbstractSerialConnectionConfigXml INFO? - Starting to connect for "NCE" [main]

2019-09-10 22:25:51,276 usbdriver.UsbDriverAdapter? ? ? ? ? ? INFO? - NCE USB COM4 port opened at 9600 baud [main]

2019-09-10 22:25:51,585 util.FileUtilSupport? ? ? ? ? ? ? ? ? INFO? - File path program: is C:\Program Files (x86)\JMRI\ [main]

2019-09-10 22:25:51,586 util.FileUtilSupport? ? ? ? ? ? ? ? ? INFO? - File path preference: is C:\Users\Heavy\JMRI\My_JMRI_Railroad.jmri\ [main]

2019-09-10 22:25:51,586 util.FileUtilSupport? ? ? ? ? ? ? ? ? INFO? - File path profile: is C:\Users\Heavy\JMRI\My_JMRI_Railroad.jmri\ [main]

2019-09-10 22:25:51,586 util.FileUtilSupport? ? ? ? ? ? ? ? ? INFO? - File path settings: is C:\Users\Heavy\JMRI\ [main]

2019-09-10 22:25:51,587 util.FileUtilSupport? ? ? ? ? ? ? ? ? INFO? - File path home: is C:\Users\Heavy\ [main]

2019-09-10 22:25:51,587 util.FileUtilSupport? ? ? ? ? ? ? ? ? INFO? - File path scripts: is C:\Program Files (x86)\JMRI\jython\ [main]

2019-09-10 22:26:01,383 jmrix.AbstractMRTrafficController? ? ?WARN? - Timeout on reply to message: AA consecutive timeouts = 0 in nce.NceTrafficController [nce.NceTrafficController Transmit thread]

2019-09-10 22:26:01,483 nce.NceConnectionStatus? ? ? ? ? ? ? ?WARN? - Incorrect or no response from NCE command station [nce.NceTrafficController Transmit thread]

2019-09-10 22:26:11,485 jmrix.AbstractMRTrafficController? ? ?WARN? - Timeout on reply to message: AA consecutive timeouts = 1 in nce.NceTrafficController [nce.NceTrafficController Transmit thread]

2019-09-10 22:26:11,586 nce.NceConnectionStatus? ? ? ? ? ? ? ?WARN? - No response from NCE command station [nce.NceTrafficController Transmit thread]

?
Looks the same to me.?
The com port shows up when unplugging and re plugging and is still Port #4. The Hub is #2 does that matter?
The cab bus light is not stuck on. Both of the lights on the NCE USB Flash when plugging in the coiled cord ,although the usb light does not flash when plugging in the usb cable.
I think we have found the problem upon uninstalling the driver and? reinstalling it has give me a error. Will keep you updated!
Locked Re: Turnout Table

 

Marc,

Table attributes are stored in the user-interface.xml file, not a panel xml file.

Find the node identity line near the beginning of the system log:

2019-09-10 21:17:38,917 node.NodeIdentity ? ? ? ? ? ? ? ? ? ? INFO ?- Using jmri-fRzxqYX7eKAk3I6pDkRFKN-3f01583d as the JMRI storage identity for?profile id 3f01583d [AWT-EventQueue-0]

Go to your profile/<nodeid> directory. ?With JMRI shutdown, edit user-interface.xml using a xml aware editor.

Search for dividerLocation and remove the property section.

? ? ? ? ? ? ? ? <property>
? ? ? ? ? ? ? ? ? ? <key>dividerLocation</key>
? ? ? ? ? ? ? ? ? ? <value class="java.lang.Integer">40</value>
? ? ? ? ? ? ? ? </property>

Save your changes and start JMRI. ?The table divider will now be based on the width of the text in the left column. ?You can also just change the value to something that works for you.

Attempting to change the width with JMRI running will result in a small left column again.


Dave Sand



On Sep 10, 2019, at 8:15 PM, forfoum@... wrote:

By the way ?. I do not save the table. Upon restart of PanelPro, I end up with the same, three character, first column.?

Marc
Locked Re: Complete Raspberry PI source question

Don Cummings
 

Hi guys, hope you can help here..

Test setup using a DCS51, Zephyr x, with locobuffer USB.? Using a single turnout to test on a breadboard.? Without a connection to the Pi except as providing power to the Arduino the Zephyr is able to actuate the turnout servo from an initial power on situation using switch t/c buttons. After hooking up the Pi and starting panel pro in autodetect mode (finds the hardware fine) I cannot throw the switch using the panels created.? I have created both internal and loconet turnouts and connected both to the switch on the panel (one at a time) but the switch does not operate.? At this point I cannot throw the turnout from the Zephyr any more.? I have to repower the Zephyr and disconnect the loconet usb to regain control.

The last time I used my laptop using windows 7 it all worked fine.?

It appears to me there is some issues with the Pi and Loconet and Zephyr I cannot get a handle on.

Being that this explanation is as clear as mud, I hope someone has some pointers try.
Thanks Don
76741 - 76760 of 239971