|
Locked
Re: CMRI and JMRI
If your layout computer is connected to the Internet, please open the ¡°Upload debugging info¡± item on JMRI¡¯s help menu, fill out the form, check all the boxes (to send everything), and click send.
That¡¯ll put all your configuration information into place where we can look at it and see what¡¯s going wrong. There¡¯s probably some mismatch in the detailed setup of your C/MRI connection. Bob On Aug 31, 2018, at 10:44 AM, pjmattson@... wrote:-- Bob Jacobsen jacobsen@... +1-510-708-5988 AIM, Skype JacobsenRG |
|
Locked
Re: CMRI and JMRI
Ken:
? I tried that. All seems to be OK with the connection and the NODES. PJ |
|
Locked
Re: CMRI and JMRI
PJ,
Important issue, first time around, don't try loading the panel. You need to get the connection correct, then add the nodes. That means how many SMINI's, what node addresses, how many and which type of I/O cards if you have a USIC. That data sometimes gets lost during an update due to file format changes. Since you were coming from that far back 4.4, I suspect that's what happened. Once you get the nodes configured, and restarted, then try the panel load. -Ken Cameron, Member JMRI Dev Team www.jmri.org www.fingerlakeslivesteamers.org www.cnymod.com www.syracusemodelrr.org |
|
Locked
CMRI and JMRI
I am trying to upgrade from 4.4. I downloaded 4.12. Had a problem. I then downloaded 4.6 and 4.8. Had the same problem. It seems they aren't recognizing the CMRI Sensors. An ERROR message comes up and says an ERROR loading? NAME ¡°CS50¡±? User Name: ¡°PS-15-2¡±. There are about 50 of these that is says it can¡¯t load. I checked the CMRI Nodes and connection. They are OK. I when to the web site it said to but it siad site not found. Now what do I do. I know I can reinstate 4.4 but I wanted to upgrade to the new Digitrax 240 command station. 4.4 does not have this in its list. |
|
Locked
Re: Progress to higher level
Hi George,
I think I am doing what you¡¯re talking about doing. I have no sensors on my layout, which is small, but I use Routes and Trains in JMRI to build my work orders. My layout is small but with delusions of grandeur. I model from central Illinois to the west coast. I have two mains, 1 yard, and several industrial sidings on a 3 x 6 foot layout. I drew my layout in PanelPro, and then replicated it several times (on the same panel) giving each new yard or siding a new name. I also put these names in Locations. Basically I mimicked the UP, BNSF, etc from Illinois to Portland and use replaceable magnetic signs for the yard and spurs. 3/4 of my system is ¡®virtual¡¯. When I build a Route I use the existing real UP or BNSF routes as inspiration. I can then do set outs and plan drop offs all along the way when I create a Train. I then use the Move function to move the train icon in the Panel to the next location and do set outs or pickups according to my Work order. Actually operating the trains, switches, and signals is completely manual. I have the laptop running JMRI next to the layout. Once you get used to it it works pretty well. You wouldn¡¯t have to go through all of this if you¡¯re layout is strictly physical, but putting it into PanelPro and using Move let¡¯s you keep track of where each train is, where it¡¯s going, and what it¡¯s supposed to do when it gets there. Getting them there is a manual operation. |
|
Locked
Re: Error while trying to run auto train under Dispatcher
Ok, I'll look at that logic. Do you think correcting that will also affect the NT14 issue?
Thanks,? Allen |
Bob Jacobsen
Ken Cameron
Mike Heintzman
ahouse3761