If your layout computer is connected to the Internet, please open the ¡°Upload debugging info¡± item on JMRI¡¯s help menu, fill out the form, check all the boxes (to send everything), and click send.
That¡¯ll put all your configuration information into place where we can look at it and see what¡¯s going wrong. There¡¯s probably some mismatch in the detailed setup of your C/MRI connection.
Bob
On Aug 31, 2018, at 10:44 AM, pjmattson@... wrote:
I am trying to upgrade from 4.4. I downloaded 4.12. Had a problem. I then downloaded 4.6 and 4.8. Had the same problem. It seems they aren't recognizing the CMRI Sensors. An ERROR message comes up and says an ERROR loading NAME ¡°CS50¡± User Name: ¡°PS-15-2¡±. There are about 50 of these that is says it can¡¯t load. I checked the CMRI Nodes and connection. They are OK. I when to the web site it said to it siad site not found. Now what do I do. I know I can reinstate 4.4 but I wanted to upgrade to the new Digitrax 240 command station. 4.4 does not have this in its list.
--
Bob Jacobsen
jacobsen@... +1-510-708-5988 AIM, Skype JacobsenRG
Bob Jacobsen