开云体育

I take it that the Operations portion of JMRI has reached maturity with no new updates the last couple of years.


Gordon Spalty

Hi guys, I loaded the test version 4.7.6+R570b2bc with Java 1.8.0_131 (en_GB), on Windows 10 64bit Version 1703 OS Build 15063.413.


Much improved in various ways, especially drop-down lists of objects from the editor in Panel Pro.


I do however have some problems.


1. Signal Mast orientation is getting lost over restarts.
1.1 Also, the default orientation on a crossover seems arbitraryily set.
1.2 Also right clicking on the mast icon to bring up the menu sometimes (often) doesn't work unless you avoid the light and click the leg...
2. I am getting flashing green/red mast aspects on a cross-over. I realize that there may be a conflict in the logic. What I had hoped was that if I could choose a route by setting a signal to green manually, but when it flashes, it seems the logic is not 'active' properly, nor can I click on it to set it to an aspect. Is there a way round this? Is there a definite reason for the flashing??
3. Had a problem loading panels after maybe adding logix or something in a test panel, but then worked ok - my layout also wont load....
4. I am not sure if I am saving properly - when I quit out it tells me to save configuration data... but doesn't saving panels do this anyway?? What is the correct procedure for updating configuration data please??
I think some logic is getting lost over saves probably as I am not doing this right. I will look at this further...


This all may not be the case in older versions...


I am very happy to test further updates / provide my panels (test ones are more useful - the larger layout may give people headaches!)


John

Running 4.7.6. I read a suggestion in another post to run
TurnOffXmlValidation.py before loading the panel and that works. Panel
will now load without the error.

Here are the offending lines:

<signalhead
class="jmri.implementation.configurexml.SE8cSignalHeadXml"
systemName="IH:SE8C:"LT419";"LT420"" userName="LH82">
<systemName>IH:SE8C:"LT419";"LT420"</systemName>
<userName>LH82</userName>
<turnoutname defines="low">LT419</turnoutname>
<turnoutname defines="high">LT420</turnoutname>
</signalhead>

On Jul 1, 2017, at 3:39 AM, jimalbanowski@... [jmriusers] <jmriusers@...> wrote:


The public beta of the newest Mac OS came up Thursday. My "spare" Mac is now up on it and initial JMRI start is good, more as I test.

Thank you!

Did you need to (re-)load any hardware drivers before it would see the layout?

Bob
--
Bob Jacobsen
rgj1927@...

Richard,



First thing is to look at the log file from starting JMRI. Since you aren't
getting a screen to interact with, you go to the files. Off the JMRI
directory under your username, ex c:&#92;Users&#92;Richard&#92;JMRI and then look for
the 'log' directory. The file session.log is the results of the last attempt
to start JMRI. You can read it with a simple text editor like Notepad. Doing
a cut/paste from that into a message for us would help.



The files message.log are a sequence of all your prior runs of JMRI. There
may be further clues in there, but the current session is the starting
point.



-Ken Cameron, Member JMRI Dev Team

www.jmri.org

www.fingerlakeslivesteamers.org

www.cnymod.com

www.syracusemodelrr.org

Hi.
I had a similar problem with my 64bit Windows 10 laptop. It was something
related to Java I suppose. Just open the task manager and look for services
that start with "jogamp"+a series of numbers. If they are there, try to
terminate them and the jurisdiction startup should resume. Hope it helps.

Roberto

Il 01 Lug 2017 01:13, "richard@... [jmriusers]" <
jmriusers@...> ha scritto:

Is anyone else having this issue? After installing 4.7.5, I see the Java
logo, and then the JMRI logo, but then nothing. No error messages, nothing.
It just goes away.


So I tried 4.7.6, but get the same result. Then I tried 4.6 production
with same result. Next, I uninstalled Java and JMRI, wiped out the
directories, and rebooted. Installed 4.6 again but still no launch.


I am running Windows 10 Pro on a 64 bit machine, and I have had numerous
successful prior versions on this machine for years.


Any ideas?


Thanks,


Richard

Hi,


I found the answer to importing division and csv modules in to JMRI script:


Place:


from __future__ import division
import csv



as the first lines in the script.




Regards


Nick

I have not used JMRI for several months and the only chnage to my layout since its last use is the introduction of NCE EB1 circuit breaker. ?Since fitting the EB1, I have been able to operate everything with my Power/Pro Cab and SB3a booster but now find that I cannot operate anything through JMRI. ?JMRI loads properly; there are no error codes or messages in red; I can display the panel and the roster but cannot get either the throttles or the points to work. ?On screen, the points change but nothing happens on the layout - equally, the throttle functions highlight and the slider works but nothing moves. ?Can anyone iddentify the problem and tell me how to overcome it pleas?
Harold.

[Non-text portions of this message have been removed]

Group:


The public beta of the newest Mac OS came up Thursday. My "spare" Mac is now up on it and initial JMRI start is good, more as I test.


Jim Albanowski

Hi,


As part of some tests I'm doing on RFID tag reading at speed I'd like to use the division and csv functions in my JMRI script.


Does anyone know how to import/ turn on these modules?.


Also which version of Jython does JMRI 3.8 and 4.6 use?.




Regards


Nick

With these steps the train's manifest appears in preview.
>Operations?>trains>build>preview>
Is it possible to print this preview manifest to file? If so how is this
done please?
James (Gil) Oakes


[Non-text portions of this message have been removed]

Is anyone else having this issue? After installing 4.7.5, I see the Java logo, and then the JMRI logo, but then nothing. No error messages, nothing. It just goes away.


So I tried 4.7.6, but get the same result. Then I tried 4.6 production with same result. Next, I uninstalled Java and JMRI, wiped out the directories, and rebooted. Installed 4.6 again but still no launch.


I am running Windows 10 Pro on a 64 bit machine, and I have had numerous successful prior versions on this machine for years.


Any ideas?


Thanks,


Richard

If the bell on 5629 was ringing or its headlight was on prior to selecting CON 5203, you will not be able to turn either off using CON 5203. You will need to select CON 5629, turn them off and then reselect CON 5203.

You can only operate switches in the loco cab you currently occupy (the CON xxxx you currently have selected), same applies to a real loco.

If all locos need to respond to the command (e.g. Sound On, Mute, Brake) that is when you set that F key bit in CVs 21/22)
--
Dave in Australia

Have you Read Sheets to confirm the CV21&22 settings?
--
Dave in Australia

Silly question, what consist address are you using?
Jay-AT&SF

Dave,

Nothing changed. All fields for both locos in JMRI Consist Tab, are set to "Locomotive Address Only. Wrote the sheets to both locos. And CV's 21 - 24 are all set to "0".

Something strange, when I select CON 5203, and ring the bell, it only rings once then shuts off. Loco 5629's bell continues to ring.

Still scratching my head on this one.

Ted

George,

You need the latest version of Decoder Pro -Ver 4.7.6

Gerry


On 1/07/2017 8:41 AM, decals@... [jmriusers] wrote:

Writing an article for the Trolleyville Times and the decoder of
choice was the Tsunami2 TSU-1100 Digital Sound Decoder. This decoder
is versatile but requires medium to extensive reprogramming for the
various features. My version of Decoderpro, 4-6, would not even
recognize the decoder although it seems to respond as expected. What
is my proble,, please?

George Huckaby
Custom Traxx

[Non-text portions of this message have been removed]

--
Gerry Hopkins MMR #177 FNMRA
Great Northern Downunder




NMRA Australasian Region
Contest & AP Chairman
Web Administrator

Writing an article for the Trolleyville Times and the decoder of choice was the Tsunami2 TSU-1100 Digital Sound Decoder. This decoder is versatile but requires medium to extensive reprogramming for the various features. My version of Decoderpro, 4-6, would not even recognize the decoder although it seems to respond as expected. What is my proble,, please?

George Huckaby
Custom Traxx

Correct. The port you want will not appear on a Mac until you plug in the USB cable for the device and its driver loads. I usually find it necessary to do that before starting DecoderPro.

Another way to check what port is being loaded by your device is:

Unplug your device. Open a Terminal Window (from /Applications/Utilities), copy and paste the following command in EXACTLY (including spaces and punctuation) then press Enter.

while : ;do clear;ls -lt /dev|head;i=$((i+1));echo $i;sleep 1;done

This command should show about 10 lines of output and then sit looping, with a counter incrementing every second.

Plug your device back in and wait a few seconds. Two new items with names like cu.xxx and tty.xxx should appear in the list. They should disappear if you unplug your device. If this does not happen, you do not have the correct drivers installed for your device and you will need to solve that before proceeding further. Once you have found your device, write down the name you see.You want the cu.xxx version not the tty.xxx version.

If you have got this far you know your device is be being seen by the Mac, that it has a matching driver installed and the name of the connection port "cu.xxx" you need to select in JMRI. If you cannot get this far, there's no way JMRI can find your device until the driver issue is resolved.

Note that in the latest test versions of JMRI we have changed the external library we use for serial ports and you may not see the tty. device any more (or even the cu. prefix).
--
Dave in Australia

Trying to create the switchboard through PanelPro 4.7 and it will no detect any turnouts, however they can be controlled if done through the turnout table, any ideas, thanks?