开云体育

Thanks guys! So it looks like each of my Peco ElectroFrog turnouts needs to be it's own block. I think what that means is regardless of whether the train is in the throat of the turnout or in any of

Hello again Jeremy, Sorry...........I seem to remember that there may be 1 more step. Click on all of the SQUARES that are at the very bottom left hand corner of your screen. You might see your icons

PLEASE NOTE THAT MARK's ORIGINAL QUESTION / ISSUE IS NOT ABOUT LOCKING HIS DECODER!!!! -=Tim

Interesting Its actually here https://www.jmri.org/help/en/html/hardware/loconet/Digitrax.shtml. Item 13. Apparently the local version, got from "Window Help" never updates the URL doesntalways update

Good afternoon Jeremy, This worked for me........ Create the following directory structure ~/.local/share/applications Create 2 text files in that applications directory Call one of them

Read this and look at the Tsunami section. It' slightly different from the standard for locking: https://hostlersinn.blogspot.com/2023/04/cv-15-and-16-locking-decoder.html John, nice write-up. Just

I strongly agree with Dave about NOT using LibreOffice Writer to edit *text* (configuration, data, etc.) files. LibreOffice Writer is a *word processor* and is not really meant to be used as a

Tim, Basically a signal is used to "protect" a "block" from being entered by reason of some conflict, usually either a conflicting route alignment or occupancy by another train. A "block" is a

Steve, That link doesn't work. It points to your local harddrive. I assume you wanted the link below, but I'm not sure what on that page you are referring

Hi John, The program allows you to use the same physical track for several industries.? Use the "Pool" feature to do this. You would create a spur track for each of the industries that will use the

Jeremy, The Linux install was recently upgraded. See https://www.jmri.org/install/Linux.shtml I recommend you use the Linux text editor instead of LibreOffice Writer. Dave Sand

Hi Wouter, Ah, I understand you, yes I only have one Cab in the form of the handheld Powercab, that could explain things, thanks.? Kind regards?Duncan?

I am following the Guide for installation of JMRI on UBUNTU 22.04. It has all gone successfully, until the last step. I can run PanelPro and Decoder Pro from the command line but I would like to have

Wow thank you guys for the help, It is greatly appreciated. Truly. So I went and cleared everything I had in the roster, threw the loco on the programming track, and clicked "Identify", after moving

I’ve tried showing all cabs and it only does the current one on the handheld screen unfortunately. ?I am running window 11 on a laptop. ?I wonder if I’m missing anything else? -- Kind

If memory serves, EVERYTHING on the cab bus (with a cab ID) shows up. Pretty certain my NCE USB did Phil G

ScottIf you are using a loconet connection is the "Transponding Present" in advanced options set to yes as per item 13 here

Mark, Read this and look at the Tsunami section. It' slightly different from the standard for locking: https://hostlersinn.blogspot.com/2023/04/cv-15-and-16-locking-decoder.html

Hi John & Folks I believe one way to do it is to set up the team track with "phantom" numbers Team Track-1. Team Track-2. Team Track-3, for each industry The Set Out won't be "Ryan's Rebar", it

Hi Duncan, You are confusing loco cabs (the locos under your control) with NCE's concept of a cab, which is a controller connected via the cab bus to the command station, in your case just the power