Mike,
For the program to be reserving track space, there has to be a built train.? I would expect the built train to terminate into staging using the track that has the reserve value of 192 feet.
Dan
|
From your description, it is not clear that you created the turnouts in JMRI.? The fact that the PowerCab can control them does not mean that JMRI can until you have created entries in the Turnout table with the correct accessory addresses.
|
Dennis,
If the dispatcher had access to the JMRI panel, there are train icons that he could use to understand train length and number of cars in the train.? With regards to "Call Time", I don't have much experience with trains running on schedule.
Dan
|
Locked
Re: Having Issues with Panels Pallets
Hi Bob,
I use PanelPro a LOT but I have not loaded Version 14.8 or higher on my system yet. The current version I am using is 14.7.4.?
Since you mention "pallets", may I guess that your are using Layout Editor. Have you tried changing to using the Panel Editor ?
I say that only because I have a friend that built his panel with Layout editor and I worked on some modifications using my system and Panel Editor . When I loaded his panel onto my system (same operating system) I was getting a lot of errors because of the file locations in my preferences vs his. When I used Panel Editor, they went away.
Nick Kulp
"I'm not a failure. I started at the bottom and I found it easily attainable. Life is too short to set unattainable goals"
- Nick Kulp
|
Hi Mike,
If you answer 0 of the 2 questions it's going to be difficult to keep those helping here motivated.
Wouter
On Tue, 4 Feb 2020 at 18:44, Mike Swederska < shur-way@...> wrote: Dave,
I believe it did what is supposed to do and that there are files in the dropbox folder. What I believe is going on is I need to populate those files from the J MRI. I don¡¯t know if it¡¯s in the instructions on the help file because I didn¡¯t miss it. Is there a way that you can show me how to populate those files in the dropbox with my existing operations files and my decoder pro roster.
Mike Swederska Sr
> On Feb 3, 2020, at 8:51 PM, Dave Heap <dgheap@...> wrote:
>
> ?Mike,
>
>> On 4 Feb 2020, at 1:44 AM, Mike Swederska <shur-way@...> wrote:
>>
>> User Files Location: C:\Users\Mike Swederska\Dropbox\JMRI\
>> Roster Location: C:\Users\Mike Swederska\Dropbox\JMRI\
>
> That looks good. That's what I'd expect.
>
>> Profile Location: C:\Users\Mike Swederska\JMRI\Meramec_Valley_Lines.jmri\
>> Settings Location: C:\Users\Mike Swederska\JMRI\
>> Current Config file:C:\Users\Mike Swederska\JMRI\Meramec_Valley_Lines.jmri\ProfileConfig.xml
>> Scripts Location: C:\Program Files (x86)\JMRI\jython\
>> Program Location: C:\Program Files (x86)\JMRI
>> Temp Files Location:C:\Users\MIKESW~1\AppData\Local\Temp\
>> Log Files Location: C:\Users\Mike Swederska\JMRI\log\
>> C:\Users\Mike Swederska\JMRI\log\messages.log
>> C:\Users\Mike Swederska\JMRI\log\messages.log.1
>> C:\Users\Mike Swederska\JMRI\log\messages.log.2
>> C:\Users\Mike Swederska\JMRI\log\session.log
>
> The rest is fine as well. Two things:
> 1) Please give us a list of the files and folders currently in:
> "C:\Users\Mike Swederska\Dropbox\JMRI\"
>
> 2) Please go to the Help->System Console menu item, click Copy to Clipboard and paste that into message for us all to see. Alternatively, upload the "C:\Users\Mike Swederska\JMRI\log\session.log" file to a folder with your name that? you create in the Files area of this list and in the Problems Being Worked On folder already there.
>
> Dave in Australia
>
>
>
>
>
>
>
>
>
|
go to locations-click edit the rip track-go to tools and click show cars. Then go back to tools-cars-print
Mike
|
Hi
?Since upgrading to the latest version, JMRI seem to be ignoring track lengths. My latest build has a staging track that is 500', used is 478' and it is reserving 192 more feet. this is not the first train build to do this. There are no other trains built and an not using planned pickups.
thanks
Mike
|
Dave,
I believe it did what is supposed to do and that there are files in the dropbox folder. What I believe is going on is I need to populate those files from the J MRI. I don¡¯t know if it¡¯s in the instructions on the help file because I didn¡¯t miss it. Is there a way that you can show me how to populate those files in the dropbox with my existing operations files and my decoder pro roster.
Mike Swederska Sr
toggle quoted message
Show quoted text
On Feb 3, 2020, at 8:51 PM, Dave Heap <dgheap@...> wrote:
?Mike,
On 4 Feb 2020, at 1:44 AM, Mike Swederska <shur-way@...> wrote:
User Files Location: C:\Users\Mike Swederska\Dropbox\JMRI\
Roster Location: C:\Users\Mike Swederska\Dropbox\JMRI\ That looks good. That's what I'd expect.
Profile Location: C:\Users\Mike Swederska\JMRI\Meramec_Valley_Lines.jmri\
Settings Location: C:\Users\Mike Swederska\JMRI\
Current Config file:C:\Users\Mike Swederska\JMRI\Meramec_Valley_Lines.jmri\ProfileConfig.xml
Scripts Location: C:\Program Files (x86)\JMRI\jython\
Program Location: C:\Program Files (x86)\JMRI
Temp Files Location:C:\Users\MIKESW~1\AppData\Local\Temp\
Log Files Location: C:\Users\Mike Swederska\JMRI\log\
C:\Users\Mike Swederska\JMRI\log\messages.log
C:\Users\Mike Swederska\JMRI\log\messages.log.1
C:\Users\Mike Swederska\JMRI\log\messages.log.2
C:\Users\Mike Swederska\JMRI\log\session.log The rest is fine as well. Two things:
1) Please give us a list of the files and folders currently in:
"C:\Users\Mike Swederska\Dropbox\JMRI\"
2) Please go to the Help->System Console menu item, click Copy to Clipboard and paste that into message for us all to see. Alternatively, upload the "C:\Users\Mike Swederska\JMRI\log\session.log" file to a folder with your name that you create in the Files area of this list and in the Problems Being Worked On folder already there.
Dave in Australia
|
Hi Andy,
Can you throw the switches from JMRI using Tools, Turnout Control?
If so, then the easiest way to control those turnouts from EngineDriver is to define them in JMRI using Tools, Tables, Turnouts. Include? meaningful UserNames. Use File, Store to save that list as a file. Add that file to the Edit, Preferences, Startup to load each time you start JMRI. EngineDriver will then show them in its Turnout list.
An alternative is to enter them manually in EngineDriver. You'll need to enable "Turnout Creation" in Edit, Preferences, WiThrottle, Allowed Controls, to allow this.
--SteveT
|
I have established a R.I.P. track in my yard.? I would like to print just the cars on this track.? Is this possible? If so, how do I do it?
Thanks...Ken
|
Good morning, I already spoke with NCE and they really could not assist me. So now I am turning to you good folks. This actually involves 3 parts. The NCE SwitchKat, JMRI and EngineDriver on my phone. When using my Powercab I can program and use the SwitchKat to throw the Kato switches. Works as advertised. When I moved to the Phone running via JMRI the switches don't show up under the turnout page. They are DCC and they are given accessory addresses. It appears to be a JMRI issue, What am I doing wrong or what do I need to do to get it to show up under "turnouts" on my engine Driver
|
Locked
Re: Some questions about signaling and the best way to debug the layout
I think I found the Firefox problem, new PR shortly. Also, did I get the MavinsHills-layoutPanel-29.xml sample file from you? The definition of IF$tsm:BR-2003:3($0005) seems to have an error in how it¡¯s ¡°Danger¡± appearance is defined. Most of the masts are like: Proceed: SMT-1-TownA-P = thrown Caution: SMT-1-TownA-C = thrown Danger: SMT-1-TownA-D = thrown but that one is Proceed: SMT-1-Halt-P = thrown Caution: SMT-1-Halt-C = thrown Danger: SMT-1-Halt-P = thrown (note the last -P) Bob On Feb 4, 2020, at 4:04 AM, Andy Brown <andy.badshot@...> wrote:
Sorry, Max speed was my error - I was quickly scanning through the JMRI tables and comparing these to the xslt output and forgot it was calculated (I think I had block length in mind, which is also missing :)....)
I've tried JMRI.4.19.3ish+jenkins+20200204T0524Z+R02e3ae7ae2 and I can see Routes and Memory Variables changes ok - thanks.
In Firefox my Blocks display is still "shifted". I've tried "Preferences-Clear Data" but to no avail. However, in Opera it looks fine. I'm thinking there's some cached item still floating around in Firefox. I'll try it on another machine when I get the chance.
Using this made me think something similar for the tag ids xml would be really good....
Andy
-- Bob Jacobsen jacobsen@... +1-510-708-5988 AIM, Skype JacobsenRG
|
On Tue, Feb 4, 2020 at 08:10 AM, Dave Barraza wrote:
What am I looking for to verify that I have duplicated the original crash, a specific error code of some kind?
I cannot duplicate either of these crashes, so it's very hard to verify potential fixes. What would be perfect is if you could describe a repeatable scenario where one or both occur, so that I can then repeat those steps and see the error. It would also be helpful to get the session.log file after a session where one or both of these errors occurred. You can email them to me or post them online. --SteveT
|
Locked
Re: Some questions about signaling and the best way to debug the layout
Happy to add ID tags, but I don¡¯t have a sample file that shows the kinds of things that appear. Is there one somewhere? I¡¯ll add block length. (I¡¯m not just displaying all the content for some items, because there are a _lot_ of things that never seem to change) Firefox looks OK to me, but of course there are lots of versions, I might not be looking for the right thing, etc. You could try a shift-reload. Bob On Feb 4, 2020, at 4:04 AM, Andy Brown <andy.badshot@...> wrote:
Sorry, Max speed was my error - I was quickly scanning through the JMRI tables and comparing these to the xslt output and forgot it was calculated (I think I had block length in mind, which is also missing :)....)
I've tried JMRI.4.19.3ish+jenkins+20200204T0524Z+R02e3ae7ae2 and I can see Routes and Memory Variables changes ok - thanks.
In Firefox my Blocks display is still "shifted". I've tried "Preferences-Clear Data" but to no avail. However, in Opera it looks fine. I'm thinking there's some cached item still floating around in Firefox. I'll try it on another machine when I get the chance.
Using this made me think something similar for the tag ids xml would be really good.... -- Bob Jacobsen rgj1927@...
|
Sorry for my confusion -What am I looking for to verify that I have duplicated the original crash, a specific error code of some kind?
I think the earlier crash may be related to 6-7 users at once - at least that was true when I captured it.
I will try to duplicate the results from the reboot scenario.
Restarting the client results in a quasi-connected state on the phone. The screen changes from the "connect" screen to the throttle screen, but it is non functional - for example you are not able to acquire a DCC address, or toggle the layout power, and the web server option does not appear.
Dave
|
Hi Everyone,
A while back I was dispatching at the layout of a friend that is using a JMRI US&S CTC panel as well as JMRI Operations.? Everything went well but the idea came to me that having a lineup of trains would help the dispatcher.? The freight agent that generates the manifests is in another room and delivers the manifest to the train crews as they're generated but the dispatcher doesn't see a copy.? The dispatcher doesn't need to know what cars go where but it would be nice to know things like work locations, power assigned (if available), but most importantly the train length and call time.? Train length is needed to allow the dispatcher to plan meets where trains will fit since not all sidings are the same length, and call time so the dispatcher knows what's coming.? Thanks in advance for any assistance.
Cheers, Dennis Drury
Dayton, NV
|
Found this at bottom of XML panel file ....?Written by JMRI version 4.12+Rb6a9bb1 on Sun Jan 19 17:59:11 EST 2020
That is the version I upgraded from
|
Locked
Re: Signal heads losing SSL during power down and up
Ken,
I would have preferred to let JMRI delete the heads; as you say, one character ...... Backup, backup, backup.
Any ideas as to why the delete button did not work? At the time, the issue with the heads was out of sequence turnout addresses in the initial setup. JMRI appeared to allow the initial setup, including SSLs, but, apparently, removed the SSLs on reboot.
Thanks,
John
On Mon, Feb 3, 2020 at 8:23 PM Ken Cameron < kcameron@...> wrote: John,
I generally run with an open console somewhere on the screen. I'll check it
now and then for odd messages. Particularly if I suspect issues and before
exiting, in case something did happen. While something could happen without
logging, that would be extremely rare.
I've found that resorting to manual (edit the file outside of JMRI) to
remove signal heads was seldom needed. But to clear out all the SSL, I've
found it the only true way a number of times.
But you must be very exact when doing that type of edit. One character left
in the wrong place can really mess up the file.
-Ken Cameron, Member JMRI Dev Team
|
Locked
Re: Having Issues with Panels Pallets
Cliff
Thanks for the advice and I apologize for providing scanty information. I should have some time this evening to pull what you suggest together.?
Thanks!
toggle quoted message
Show quoted text
On Feb 4, 2020, at 1:44 AM, Cliff Anderson <cliffaa@...> wrote:
? Bob,
It is entirely likely that others on this list are having the same difficulties that I do. Bluntly, there is not enough information provided to surmise what kind of help can be suggested.
Please read very carefully the requested information message and provide at least a copy of the text in your jmri/log/session.log file or a copy of the text in your "JMRI System Console" window using Cut and Paste but not as an attached file.
There are three Panel Editors that are commonly used and a fourth Editor that I have no experience with. Identifying which Editor you are using goes a long way toward how one of the members can couch a response to your question. Your mention of signal heads and pallets suggest that you might be having trouble with Layout Editor.
Looking forward to your added information.
Cliff in Baja SoCal
|
Locked
Re: Some questions about signaling and the best way to debug the layout
Sorry, Max speed was my error - I was quickly scanning through the JMRI tables and comparing these to the xslt output and forgot it was calculated (I think I had block length in mind, which is also missing :)....)
I've tried JMRI.4.19.3ish+jenkins+20200204T0524Z+R02e3ae7ae2 and I can see Routes and Memory Variables changes ok - thanks.
In Firefox my Blocks display is still "shifted". I've tried "Preferences-Clear Data" but to no avail. However, in Opera it looks fine. I'm thinking there's some cached item still floating around in Firefox. I'll try it on another machine when I get the chance.
Using this made me think something similar for the tag ids xml would be really good....
Andy
|
splasher
Andy Zimmerman
Bob Jacobsen
Dave Barraza