开云体育

Be sure your build report is set to the most detailed version.? That report will tell you what cars were considered and what cars were rejected.? There is a reason and it is in the build report.?

Bob that sounds great. Any chance of getting the xml and script file(s)?

Cliff and Pete: thanks much for cleaning up after me. I was quite embarrassed to see my 3 files in Root, but did not know how to move them. Next time I upload files I'll be sure to put them into an

I have the LE Panel on my desktop PC, dated 7/22, which should be the version I loaded onto the RPi. But, I may not have the file as stored on the RPi: I deleted it and then loaded the new version on

I'm not an expert on this, and people will probably give you a dozen solutions. My thought is, list the track/everything as 2 different 'railroads', say O and On30 (If they are actually 2 different

You don't say what the problem is. Please state what you think problem is, what you see occurring, and what you want to occur. I'm guessing that you're getting a 6 car train, and want a 7 car train.

This occurs when a PR3 or PR4 is used in 'stand-alone' mode. Digitrax uses CV128 to turn the motor drive off in a Digitrax sound decoder allowing testing the sounds only with the power available from

Fraser Shame you have to master SM soldering perhaps tere is a market for assembled units ? John Pearson Sent: 23 August 2019 11:31 To: [email protected] Subject: Re: [jmriusers] Can Buss Hi Mike,

Rob, This is a known issue with some Digitrax programming hardware. The value of CV128 (often but not always master volume) is reset to 0 in certain circumstances. Others with Digitrax knowledge can

Rob and John, Asking JMRI to "Read Type from Decoder" should always be the first step. Selecting a model because you think that's the model you have is a potential cause of problems. Reading the full

Thank you for the technical info I am convinced I will be using 3 dc cab power supplies Tony

Thank you for the info Project is more difficult than i was let o believe. I will be using 3 dc cab power supplies Tony

Thanks everybody for all the help! You saved me a bunch of wasted effort trying to start over installing JMRI... I was able to quickly find and start it. I've also edited the owner fields and added

Hi George, A quick update. It appears the problem is not with my PR4 but with my DN163A0. As you suggested I tried another locomotive on my test track with the Digitrax Sound Loader and it read that

My friend has a railroad with Standard gauge and On30 trackage, with a very small common mixed gauge area. I view this basically as 2 seperate railroads is my thinking correct? What is the best way to

Two other approaches. Copy a profile and change the start up options to include Open Roster. If an icon is really important, copy the PanelPro icon with a new name and modify the properties. Dave Sand

Thank you all for your replies: that is very helpful. I am now away from home for a week, so I will have to try these recommendations when I get back. Thank you again!

Click on Roster followed by Roster again in drop down menu. No need for a second start icon. -- Peter Ulvestad JMRI Users Group Moderator - http://www.jmri.org ( http://www.jmri.org ) Tam Valley Group

Don: The PanelPro pane on top, tools > programmers... Since the RPi-JMRI is targeted to running the RR I think Steve started with the PanelPro pane as a logical choice for that... Jim Albanowski

Don, Decoderpro is built into Jmri. It is not a separate entity. The user interface just looks different. Steve's image doesnt have the decoderpro launch icon, but you can still get to it from