开云体育

It looks like somehow the steps that create the “version” code aren’t being run. When you tell Ant to do the build, the “update-template-code” step handles that. Do you have Eclipse

I am working on an installation of Team Digital BLOC8D for our club and would like some help on the readout I get when monitoring the LocoNet via Decoder Pro. This is the sequence I get when using the

Ah, I must have missed that. Thanks! Sincerely, Steve

Bob Z, One clue if you do use SSL is that to combine turnouts, you need to create virtual signals and then make the real one 'distant' to the virtual so it combines the logic results. When 'distant'

I'm also Win10, Eclipse Oxygen 4.7.0, and doing fine with HEAD. I can run or debug just fine and not getting similar errors. -Ken Cameron, Member JMRI Dev Team www.jmri.org

I have a JMRI git repository on my Win 10 system. in Eclipse Mars 2, 4.7.1, 4.8 and 4.9.1 build correctly. 4.7.1 runs fine from Eclipse including Locobuf and CMRI interfaces. However, I get the

The large majority of locos have all the wheels on each side directly electrically connected. So I am not sure how the frog voltage could ever be different from the track voltage? Andy

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the jmriusers group. File : /Bob Z Virtual Signals/SignalLogicKiskiiWest2.png Uploaded by

Bob Z, Check out my web page http://quaker-valley.com/CTC/QV_CTCnew.html about mid way down is a picture of the layout editor panel with all of the intermediate internal signals revealed. I used SSL

Please see the file "LayoutDiagram.png" in folder Bob Z Virtual Signals. I am wondering if Simple Signal Logic will meet my needs. I am trying to control the signals at CP Kiski westbound (to left)

Gary Probably easiest to create a head using the Double Output driver. This will display correctly when you select Dark, Red or Green. Create a mast using this head as a head controlled mast and as

The current is limited to less than the short wants (very high current) but more than any loco would want otherwise a loco moving onto a frog set correctly would trigger it. The frog voltage will move

FYI, with JMRI 4.8 or later the ESU SwitchPilot decoders have JMRI decoder definitions, are fully programmable on Program Track (read the ESU manual to see how to connect for Program Track Mode) and

Steve, Since you are using direct connectivity, JMRI is providing the timing for your flashing reds. So, you should not need to change anything in CATS, but make your changes in JMRI, as you first

The German signals don't work that way. Depending upon which signal type they are more complex in that they show aspects and can show more than one aspect at the same time depending upon whether there

This can only be done if the decoder supports such an option. I know that ESU decoders can be configured so that a function key works as a combined Volume/Mute key; a single press mutes or unmutes,

Hi Fraser, I looked at your XML panel file, but am pretty sure the structure of the matrix signal masts is ok despite being written in 4.6. After I deleted all the extra stuff, except for 1 matrix

I am trying to set up a basic Signal with 3 states Red, Green, and Dark. I have tried all of the various Signal Heads. The signal is being driven by an ESU 51820 Accessory Decoder using 2 of the 4

Thanks to all that worked to bring us Version 4.8. It installed with no serious concerns and seems to address the burning issues. Good Job! Walt

Steve, They are indicated on the label on the top. Left is LocoNet termination, Right is Railsync power. Dick :)