开云体育

I've had similar "can't connect" errors while using a smartphone. Usually it's been caused by the two computers (phone and JMRI computer) being on separate networks.?? That's easy to do with phones,

That does not actually mean too much. When you "turned on wifi", does the phone say what SSID it connected to. I know that *my* phone lists the network (SSID) it connects to,

Also, the length of the train could be artificially lowered at the origin to limit the number of cars it takes initially. Phil

Dan, Once again the depths of your fore-thought in to what this programs can do continues to amaze me! TY!...TY!...TY! Pete J

Neil In 128 mode Start 21 increment 21 speed steps should be good for most things Steve G.

Hi guys. Thanks for all you info. I have profiled about a dozen locos to date but used, let me check .... about 240 mm. I had a feeling a longer run would be better, just asked to confirm really. I

Here are some code snippets that might help you put together what you’re trying to do. First, get some system objects you’ll need (assuming you have only one LocoNet connection): connection =

In my opinion, do not do this! Clearing the LocoNet "slot table" is very rarely a "good idea"! It often confuses throttles more than they were before. In my opinion, any JMRI "solution" for this

Not to diminish any of the suggested means to balance which train(s) get the gon, but never forget the most basic principle that any problem that can be solved by just acquiring more rolling stock

Good morning, I am a modeler from Poland. I wanted to write code for JMRI that would automatically clear the LocoNet slot list as implemented by the Digitrax control panel. I have already used

Yes, please. Details matter a LOT when trying to diagnose network issues remotely. I'd also like to see a screenshot of the About screen while connected. That will show the SSID and type. Or, just

I did test this, I put a phone in airplane mode, then turned on wifi, and I could surf the internet. Just has one. T-mobile support had me create a second one (2.4gHz only) as a test, no joy there

Random thing to check; Are the phones actually connecting to the router? They *might* just be using Cellar Data. Also: Does the T-Mobile router have two SSIDs? -- eg a local home LAN and a "Guest"

Did that, unfortunately I didn't record the exact wording but the log basically said "can't connect from ${ONEIP:PORT} to ${THEOTHERIP:PORT}". It'll be next week Tuesday before I can get back over

Tim, First debug step for EngineDriver is to enter the IP and port manually, then find and post the exact (and complete) error message here. You can find it in the EngineDriver log. Note: I don't have

Greetings all, Wondering if anyone has encountered this: Before: JMRI & WiThrottle running on a desktop PC connected to the home network, everything wireless through the router, internet

The "day" can be anything.? You can create "Day Shift", "Night Shift" and "Graveyard Shift" when creating train schedules.

gs Your thinking of speed matching; profiling is where you build a throttle setting/scale_speed table to driver trains at a scale speed, calculate stopping distances, consist with a softthrottle,

Dan - Thanks.? That's more or less what I expected after mulling it over for a while. Pete - Thanks also for your thoughts.? Each shift, the Switcher needs to bring down whatever MTs are on the

I don't know if there is a requirement to use a straight section of track.? I use a closed circle of N scale Unitrack with a Speedometer.? Easy to setup and take down for storage.? I have a 4 foot