开云体育

Marc, Thank you for the hint. I will check next time I’m at the club. Doesn’t explain why it works when the USB cable is unplugged from 1 computer and plugged into the other. Ross Sent: Thursday,

Phil, I have created a simple test case which replicates your issue. I have a pretty good idea of what is happening but I don’t have a solution yet. In the meantime, create a GitHub issue. Dave Sand

Typo – S/B 4.15.9 Sent: Thursday, August 1, 2019 4:31 PM To: [email protected] Subject: Re: [jmriusers] Help getting JMRI working on a new WIN10 computer Is that JMRI version 4.17.9 a typo ?

I'm assuming that you know to look at the Device Manager on the computer for the LocoBuffer connecting, and establishing a COM port ? If that's not appearing to work, then.... Are the ports on the

Marc, All 8 boxes are blank. Ross Sent: Thursday, August 1, 2019 4:29 PM To: [email protected] Subject: Re: [jmriusers] Help getting JMRI working on a new WIN10 computer

Phil, Now that I understand that you were using one of the panel editors, what you describe seems to make sense, but only almost. Certainly it is common for the panel editors to each make any name

You also need to do Read Type from Decoder, as new Loks from atlas, scale trains, etc are Loksound V5 decoders, not Selects. Add in Old V4.0 and Essential Sound Units, all of which are different, and

I've hit a road block establishing communication between JMRI and a Digitrax DCS100 using a LocoBuffer-USB interface. This is a new installation in a computer replacing a recently failed unit. After

There is a new board called a "decoder buddy" from NixTrains. Almost straight drop in for OEM QSI boards. Gives you a 21 pin motherboard to install any 21-pin decoder (I prefer Loksound) Thomas

Friends, Just FYI on this off-topic thread. I BETA tested for QSI and the only decoders that had the short-circuit problem were the original OEM decoders OR those that were set for dual mode (analog

YES a BIG help indeed.? THANK YOU and I will do as you suggest.? THANK YOU.

Howdy Cliff.? I was merely renaming several memory variables in the table (under tools) using the JMRI right-click "Rename" function.? It almost worked.? In already defined Logix, all the changes I

Yes...I am using a windows 7 laptop computer (locobuffer-usb) and my DCC system is Digitrax ....sorry about the confusion

Frank, I believe in most decoders they are (as far as the JMRI people knew when they wrote the definition). The exception - you guessed it - are sound decoders... (I definitely know that about

Phil, What problem are you trying to solve? Dynamically changing the name of a memory location is a big NO-NO in software. Something akin to pulling a rug out from under your own feet. You must have a

I am trying to add a new Atlas GP-7 locomotive to my DecoderPro roster so I can set the decoder address and other things the way I want them. First I go to NEW Locomotive and select ESU as decoder

Using 4.16, if the user name of a memory variable is changed (renamed), in Logix, a copy memory to memory action is not fully updated with the new name.? The subject memory variable is updated, but

folks, thanks for the explanation. Your assistance and advice is appreciated .

That explains the problem. Would using Decoder lock ( cv15&16 ) prevent this?

Hi ...sorry....I did not explain my self very well, the Computer data...Digitrax engine numbers, speed table and CV settings. THANK YOU..... :>)....Have a good day.....Frank W (iPad)