开云体育

From: Bob Jacobsen Sounds quite reasonable. What should the syntax be? As near as I can tell, everything but the wildcard characters (# and +) are valid in MQTT topic names. That means that we can’t

It will help us hugely if you go to the Help->System Console menu item, click Copy to Clipboard and paste that into message for us all to see. Alternatively, go to the Help->Locations menu item, click

Bob,? I was only saying that changing everything towards ON and OFF, might make Masts or Signal Heads a little messy. So was rather suggesting that we keep it in a way to configure the messages

I figured out why I was getting two Loconet windows when I started PanelPro. Apparently I had somehow created a second profile and that caused PanePro to open a window for each profile. I had not

I just tried reading the DCS100 op switches with DP 4.13.6, and all I got was system console errors and nothing read: 2018-12-13 20:57:42,766 symbolicprog.CvValue WARN - Exception during CV read:

I’ve tried some stuff with the DCS100 and 4.13.6 1 Soundtraxx Eco-21PNEM Uk steam, program track write full sheet from the CV pane. No errors noted, but DP is using Page mode according to the

I have done as you suggest with the Ullapool - Lochinver branch which also didn't work but which is shorter to play around with.? It works fine - thank you.? I can play a bit and will update it when

John OperationsPro has been available for close to 10 years. I can't reproduce your issue with the instructions you've provided,? My testing of the current release seems to work correctly, at least

Marc, All connections are on NCE and not internal. Still can’t program on main or programming track. Won’t transfer command station to programming track either. Also, should it be set to direct or

Thanks I'll have a look at that.

Would a door bell transformer, three push button switches and three literal doorbells (not the musical chime types) be out of the question? Would keep the operators on the ball and may even help work

Folks, I am currently using the audio card in my computer to play a sound file for an approach bell at one of my towers.? The bell seems to be a popular item, and my operators at two other towers

Depending on how model train automation development proceeds, you have to consider whether and if,? how, a passenger station would publish it's availability, platform length and passenger access

I did try 4.13.6 with the DCS100 and the Loksound decoder, and all was fine, but that was on ops mode only. I can try it in service track mode, too. Mick ________________________________ Mick Moignard

Hi James, Are you suffering the same sluggish response as 'rockpro', or just seeing the WARN messages? The WARN messages you show below only seem to be every few seconds in your listing. If this is

Iain, The method that I used to sort the station distances breaks down with large numbers. Due to the release schedule for 4.14, I am not going to be able to get the fix into the next production

Thanks for all the effort on this. One problem with indexed writes did show up, and that will be fixed shortly. I think you could be seeing issues in the DCS240, either that one in particular or more

Sounds quite reasonable. What should the syntax be? As near as I can tell, everything but the wildcard characters (# and +) are valid in MQTT topic names. That means that we can’t count on colons

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the [email protected] group. *File:* TimeTableData.xml *Uploaded By:* Iain

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the [email protected] group. *File:* TimeTableData.xml *Uploaded By:* Iain