开云体育

David, In the next test release 4.13.5, I've added check boxes to the "Manifest Print Options" window that will allow you to the show caboose and passenger car loads . Dan

Wain, It looks to me that the NCE command station crashed. Other than the Macro tool, was anything else communicating with the NCE command station?? The console shows a timeout to a valid macro

Dave? I have been using JMRI for a while now, but I cannot seem to get where I want to be. I have a Digitrax system, DCS50, Windows Vista RR-Cirkits and loconet. I believe Dave has my layout (George

Your fallback method (copying the "roster" folder) is the one I prefer. The Export Complete Roster option takes a long time to complete (with no busy/completed feedback) and actually produces a ZIP

/g/jmriusers/message/153685 There are only 4 messages in the original thread. Your answer is in the second message. /g/jmriusers/message/153695 -- Peter Ulvestad JMRI

Mike, Wouter is correct. I need to update this page: <http://jmri.org/help/en/html/hardware/nce/NCE.shtml#usblimitations> Also, as Wouter has said, ignore the el-cheapo RS232 to USB connectors you see

Greetings all; My first note of this snag seemed to have been co-opted to the discussion of some other problem - so I'm re-printing it. ------------------------------------------------------ Another

I have numerous logix running on my layout and have for years.? I recently have added several signal heads and more logix to go with them.? Every once in a while, when the logix controlling a signal

Hi, Today I attempted to export the roster from one computer to a new computer.? They are both Windows 10 and JMRI on both is 4.12. I used the "Export Roster" option and the "Import Roster" options.

Dave and Cliff, I was having some issues finding the lines you suggested Cliff, then saw Dave's suggestion and followed that.? It works as requested!!? Thank you for the quick reply and help, both

Wain, An alternate solution to Cliff’s approach. Add "import time” Change the print line: print time.strftime("%Y-%m-%d %H:%M:%S"), mesg Dave Sand

The Preview seen on my screen prior to sending is not always in agreement with what is reported at the groups.io website 2018-11-21 09:24:41,939 script.SensorLog INFO - Sensor NS550 (East Yard) from

Wain, The modifications suggested here approximate what you asked for and were developed several months ago. The only tests that I have performed were on Digitrax DCS200 and NCE simulator. These

I may be totally off base since I am a newbie.? It was my understanding that (when using 4 motors) the "supporting turnout" was used to indicate the "pair" to select a route across the crossover.?

Hi, The use of macros in JMRI with the NCE PowerHouse command station has been a problem for several years and even as late as last year it was advised not to use the feature.? Last night, in

Wouter, thanks for the guidance. I will try that connection type. Mike Sent: Wednesday, November 21, 2018 7:13 AM To: [email protected] Subject: Re: [jmriusers] NCE AUI Sensors not detecting active

Jim, The advantage of throwing one pair or the other is that you have then defined the proper route through the turnouts so that you can set the proper polarity on the crossing rails. If you throw all

Hi, I have recently started using?SensorLog.py as a tool to validate block assignments on our layout and it works quite well, thank you.? The only change I would like to see would be to add a time

Hi Mike, Although I am not sure that this is the actual cause of what you are experiencing, the choice of using an NCE-USB with a PH-Pro is most definitely incorrect(*). That device is specifically

Mitchell, Following Steve's note above I've added the direction sensors to signal logic so that signals are set to danger when the section isn't allocated for my single track segments. ?It seems to