开云体育

Nice to hear from you Denny! Your experience raises another point: Surge protectors don’t last forever. After enough hits (or a big enough single hit), they’re not “protecting” any more. This

Larry, I thought I would add a couple of tips to help you along. First and you may already have figured this out, the numeric part of the System Name, ie. the 257 of LT257 and 258 of LT258, are the

Suggest you look at these two links. They will explain what needs moving, even if you aren't interested in using Dropbox: <http://jmri.org/help/en/html/Dropbox.shtml>

I would highly recommend a whole surge protector be installed in their house. I believe that it saved my major electrical components for the lightening strike at my house. Both neighbors on either

i need to migrate my Decoder Pro files from my ancient PC to a MacBook Pro. I've installed JMRI 4.8 on the Mac, now what Decoder Pro files need to be copied over that contain my roster of locos with

A 240v power surge in January fried almost everything in the house not on surge protectors. The latter did their jobs well, but gave up their lives in the process. Denny Sacramento Denny S. Anspach MD

Thanks for the help. The solution definitely had to do with profiles. When I got to “set active profile” and selected another I had created much earlier when starting with the program. The old

Open up decoderpro, select engine in question and right click. On the menu about half way down will be something like "media and functions". Select that and you'll get a window where you can label

Bill, JMRI is probably hanging up because it's trying to connect but can't. I'd suggest setting up a profile (or modifying an existing profile, if you have one) with one of the simulators selected as

Billybob, Yes, that makes a lot of sense! I was checking out all the signal head types in JMRI and "Quad" seemed to be a type that would work, but it had four spots in which to enter turnout addresses

Thank you Peter, once I got over the system name not being what I expected it to be, I was able to get to work. Larry

When I open a new throttle, I see grayed out buttons F1 - F15. When I select a locomotive and click <Set>, however, all those buttons turn into SS1 - SS16. Also, when I look at the function map, I

Reference: JMRI Ops ?I am a new user of JMRI Operations, trying to use itin simple form for operations only, with no interface to my HO railroad. I havebeen working on implementation for two months

Equivalent for Android? Nope, better. Engine Driver (a most excellent app with superior support) is what I use. It connects to WiThrottle on JMRI, and as mentioned above, DigiTrains is available as

Does your WiFi interface have an ip address when the computer isn't connected to the network? Does your computer run dhcp for the phones that will be trying to connect?

You could also try DigiTrains (by Gyori Belazs) which also works on Android and talks to JMRI. I have both DigiTrains and Engine Driver on my phone, so I can use whichever I feel like. Ian Morgan

I've seen close lightning strikes (tree outside the building) where the induced voltage in internal-only cabling has been sufficient to destroy (blow the tops off) chips (including opto-isolator

Several years ago we had a power surge due to a nearby lightning strike. It burned up the compressor motor to the heat pump. Didn't damage any Digitrax equipment but fried some chips in C/MR-I. I

Well probably the cheapest solution then is to disconnect the Loconet cable (6 conductor flat wire) at the entry / exit from each of the metal boxes. Easy to do but a pain. That way if there is a

I have a Lenz based system using signal mast logic and full occupancy detection using Lenz and LDT kit. I can run dispatcher and autotrains on a simple loop, turnout and signal heads all change and