toggle quoted message
Show quoted text
Technically it should be an 8 ohm speaker, but pretty much any external
speaker should work. The one you pictured should work fine. I generally
hit Goodwill and grab a pair of bookshelf speakers as they work to hold
up a shelf as well. Typically around $5 for a pair and they sound great.
If they don't have an audio cable with 3.5mm plug on the end at
Goodwill, you can usually get them at Walmart.
Michael WA7SKG
Gene Smith - K7HPF via wrote on 9/19/24 10:56 AM:
> What*/Speaker Jack/ *is required for the external speaker on the back of
> the IC-7000?? My headphones work and the internal speaker is disabled -
> good.
> What external speaker jack do I need?? Nomenclature? Where can I get one?
> K7HPF, Gene
|
Technically it should be an 8 ohm speaker, but pretty much any external
speaker should work. The one you pictured should work fine. I generally
hit Goodwill and grab a pair of bookshelf speakers as they work to hold
up a shelf as well. Typically around $5 for a pair and they sound great.
If they don't have an audio cable with 3.5mm plug on the end at
Goodwill, you can usually get them at Walmart.
Michael WA7SKG
Gene Smith - K7HPF via groups.io wrote on 9/19/24 10:56 AM:
toggle quoted message
Show quoted text
What*/Speaker Jack/ *is required for the external speaker on the back of
the IC-7000?? My headphones work and the internal speaker is disabled -
good.
What external speaker jack do I need?? Nomenclature? Where can I get one?
K7HPF, Gene
|
What Speaker Jack is required for the external speaker on the back of the IC-7000?? My headphones work and the internal speaker is disabled - good.??
?
What external speaker jack do I need?? Nomenclature?? Where can I get one?
?
K7HPF, Gene
?
?
|
Hi
the situation is very hard !
On solder side I think there is an opportunity but I have no idea
with the damage in other side !
You should to clean the other side well and to do some other
photos to understand if there is a space to fix ! If the area is
full of SMDs component, it's very hard to fix, the situation is
very very difficult.
Please, if you can of course, try to do other photos of other
side (side with coil) ; before clean well . Thanks
73s Pasquale IW0HEX
Il 16/09/2024 15:05, Reg Du Toit ha
scritto:
toggle quoted message
Show quoted text
Hi Pasquale
Here are the photos
73, Reg
On 15-09-2024 11:15, Pasquale S via
groups.io wrote:
Hi Reg
so you are fault in VHF section, I'm studying the schematics
!
Please, put here a photo with the burnt area so we can
support you with any idea to fix the PCB. In the past I fixed
some PCBs with burnt, often it's no possibile but sometimes
can you do it.
73s, Pasquale IW0HEX
Il 15/09/2024 08:14, Reg Du Toit ha
scritto:
Hi Paul
Just thinking, I would even consider a faulty board as
long as its not burnt up. Mine burnt at the junction of Q501
and L531. There was a dry joint on L531 and it burnt a hole
in the board. I would be able to get a working board out of
the two of them. Just hoping
Many thanks, Reg
|
Reg, Thank you. I have friends with this model radio so I'm trying to keep track of their history. It may help them in the near future. Thank you? Bob W4JFA?
Hi Bob
Here are the photos
Sorry I put the wrong name
73, Reg
On 16-09-2024 00:39, Bob via
wrote:
Reg, Please send it to me also if you don't mind.
Thank you.
Bob W4JFA
Hi Pasquale
Many thanks for your reply and offer to help
I'll take photos and send it to you
73, Reg
On 15-09-2024 11:15, Pasquale S via wrote:
Hi Reg
so you are fault in VHF section, I'm studying the
schematics !
Please, put here a photo with the burnt area so we can
support you with any idea to fix the PCB. In the past I
fixed some PCBs with burnt, often it's no possibile but
sometimes can you do it.
73s, Pasquale IW0HEX
Il 15/09/2024 08:14, Reg Du Toit ha scritto:
Hi Paul
Just thinking, I would even consider a faulty board
as long as its not burnt up. Mine burnt at the
junction of Q501 and L531. There was a dry joint on
L531 and it burnt a hole in the board. I would be able
to get a working board out of the two of them. Just
hoping
Many thanks, Reg
|
Hi Bob
Here are the photos
Sorry I put the wrong name
73, Reg
On 16-09-2024 00:39, Bob via groups.io
wrote:
toggle quoted message
Show quoted text
Reg, Please send it to me also if you don't mind.
Thank you.
Bob W4JFA
Hi Pasquale
Many thanks for your reply and offer to help
I'll take photos and send it to you
73, Reg
On 15-09-2024 11:15, Pasquale S via wrote:
Hi Reg
so you are fault in VHF section, I'm studying the
schematics !
Please, put here a photo with the burnt area so we can
support you with any idea to fix the PCB. In the past I
fixed some PCBs with burnt, often it's no possibile but
sometimes can you do it.
73s, Pasquale IW0HEX
Il 15/09/2024 08:14, Reg Du Toit ha scritto:
Hi Paul
Just thinking, I would even consider a faulty board
as long as its not burnt up. Mine burnt at the
junction of Q501 and L531. There was a dry joint on
L531 and it burnt a hole in the board. I would be able
to get a working board out of the two of them. Just
hoping
Many thanks, Reg
|
Hi Paul
Here are the photos
73, Reg
On 16-09-2024 00:39, Bob via groups.io
wrote:
toggle quoted message
Show quoted text
Reg, Please send it to me also if you don't mind.
Thank you.
Bob W4JFA
Hi Pasquale
Many thanks for your reply and offer to help
I'll take photos and send it to you
73, Reg
On 15-09-2024 11:15, Pasquale S via wrote:
Hi Reg
so you are fault in VHF section, I'm studying the
schematics !
Please, put here a photo with the burnt area so we can
support you with any idea to fix the PCB. In the past I
fixed some PCBs with burnt, often it's no possibile but
sometimes can you do it.
73s, Pasquale IW0HEX
Il 15/09/2024 08:14, Reg Du Toit ha scritto:
Hi Paul
Just thinking, I would even consider a faulty board
as long as its not burnt up. Mine burnt at the
junction of Q501 and L531. There was a dry joint on
L531 and it burnt a hole in the board. I would be able
to get a working board out of the two of them. Just
hoping
Many thanks, Reg
|
Hi Pasquale
Here are the photos
73, Reg
On 15-09-2024 11:15, Pasquale S via
groups.io wrote:
toggle quoted message
Show quoted text
Hi Reg
so you are fault in VHF section, I'm studying the schematics !
Please, put here a photo with the burnt area so we can support
you with any idea to fix the PCB. In the past I fixed some PCBs
with burnt, often it's no possibile but sometimes can you do it.
73s, Pasquale IW0HEX
Il 15/09/2024 08:14, Reg Du Toit ha
scritto:
Hi Paul
Just thinking, I would even consider a faulty board as long
as its not burnt up. Mine burnt at the junction of Q501 and
L531. There was a dry joint on L531 and it burnt a hole in the
board. I would be able to get a working board out of the two
of them. Just hoping
Many thanks, Reg
|
Hi Raul
Thanks for the reply. I could not find it so if you can send me a link that will help
73, Reg
On 15-09-2024 12:34, Raul J Pla via
groups.io wrote:
toggle quoted message
Show quoted text
One came up on eBay today on my daily search email. It's $59
I think.
|
One came up on eBay today on my daily search email. It's $59 I think.
|
Reg, Please send it to me also if you don't mind. Thank you. Bob W4JFA
Hi Pasquale
Many thanks for your reply and offer to help
I'll take photos and send it to you
73, Reg
On 15-09-2024 11:15, Pasquale S via
wrote:
Hi Reg
so you are fault in VHF section, I'm studying the schematics !
Please, put here a photo with the burnt area so we can support
you with any idea to fix the PCB. In the past I fixed some PCBs
with burnt, often it's no possibile but sometimes can you do it.
73s, Pasquale IW0HEX
Il 15/09/2024 08:14, Reg Du Toit ha
scritto:
Hi Paul
Just thinking, I would even consider a faulty board as long
as its not burnt up. Mine burnt at the junction of Q501 and
L531. There was a dry joint on L531 and it burnt a hole in the
board. I would be able to get a working board out of the two
of them. Just hoping
Many thanks, Reg
|
Hi Pasquale
Many thanks for your reply and offer to help
I'll take photos and send it to you
73, Reg
On 15-09-2024 11:15, Pasquale S via
groups.io wrote:
toggle quoted message
Show quoted text
Hi Reg
so you are fault in VHF section, I'm studying the schematics !
Please, put here a photo with the burnt area so we can support
you with any idea to fix the PCB. In the past I fixed some PCBs
with burnt, often it's no possibile but sometimes can you do it.
73s, Pasquale IW0HEX
Il 15/09/2024 08:14, Reg Du Toit ha
scritto:
Hi Paul
Just thinking, I would even consider a faulty board as long
as its not burnt up. Mine burnt at the junction of Q501 and
L531. There was a dry joint on L531 and it burnt a hole in the
board. I would be able to get a working board out of the two
of them. Just hoping
Many thanks, Reg
|
Hi Reg
so you are fault in VHF section, I'm studying the schematics !
Please, put here a photo with the burnt area so we can support
you with any idea to fix the PCB. In the past I fixed some PCBs
with burnt, often it's no possibile but sometimes can you do it.
73s, Pasquale IW0HEX
Il 15/09/2024 08:14, Reg Du Toit ha
scritto:
toggle quoted message
Show quoted text
Hi Paul
Just thinking, I would even consider a faulty board as long
as its not burnt up. Mine burnt at the junction of Q501 and
L531. There was a dry joint on L531 and it burnt a hole in the
board. I would be able to get a working board out of the two of
them. Just hoping
Many thanks, Reg
|
Hi Paul
Just thinking, I would even consider a faulty board as long as its not burnt up. Mine burnt at the junction of Q501 and L531. There was a dry joint on L531 and it burnt a hole in the board. I would be able to get a working board out of the two of them. Just hoping
Many thanks, Reg
|
Hi Paul
Thank you for your reply
Reg
On 14-09-2024 16:57, Paul Hansen via
groups.io wrote:
toggle quoted message
Show quoted text
I
wish I could. I don’t have
any good ones.
?
Thank
You
?
Paul
W. Hansen, W6XA
Amateur
Radio Service
2134
Carthage Road
Tucker,
GA 30084
(864)
222-3539
?
?
My PA board has burnt out, I need a
replacement PA board,
can someone please help me with a PA board
|
I wish I could. I don’t have
any good ones.
?
Thank You
?
Paul W. Hansen, W6XA
Amateur Radio Service
2134 Carthage Road
Tucker, GA 30084
(864) 222-3539
www.amateurradioservice.com
?
toggle quoted message
Show quoted text
From: [email protected]
[mailto:[email protected]] On Behalf Of Reg Du Toit
Sent: Saturday, September 14, 2024 05:55
To: [email protected]
Subject: [ic7000] PA board
?
My PA board has burnt out, I need a replacement PA board,
can someone please help me with a PA board
|
Hi
My PA board has burnt out, I need a replacement PA board, can someone please help me with a PA board
Thanks
Reg
|
Re: IC-7000 PA board needed
|
My PA board suffered some corrosion damage and is not repairable. Looking for another PA board or a complete parts machine. thx, Alan, W4FBI
?
cass44 at outlook.com
|
Re: Mystery Bootscreen Firmware?
Thats right, the Icom screen is switched off with this funktion but the bluesceen is still there.
?
Iam realy the the one and only with this picture ?
|
Michael WA7SKG
Bob
Raul J Pla
W4FBI