开云体育

I think that you might need to use the VOX to key the transmit. I have used one, but I forget the setup. As I recall there is a chip that will key the PTT on transmit audio if it is high enough to

I need anyone who has successfully interfaced a IC7000 using winlink, the UZ7ho soundmodem and the easy digi usb interface sold on Ebay.? I cannot get the PTT to work.? Can anyone help?

Run a shielded 6 pin cable to the main body and then the Mike will be muted on digital.

A friend gave me a SIgnaLink USB.? Talking to the very nice and knowledgeable lady at SIgnaLink?she indicated that people have done the various soundcard modes including Vara FM Narrow through the

Anyone using Winlink and Easy Digi USB with the ic-7000.? I can't get it to work. I would like to talk to someone or email them on how I should have it hooked up..

Dear Steve, Thanks for the enquiry,i studied lot of cpu failure rigs with fault cpu ,The main problem happened for failure is due to intense heat at the processor ic the BGA(Ball Grid Array) ,the

Prabhu, Can You Supply Some More Information As To You, and your Location as Well ad the Cost Can You Be A Bit More Specific since a few? Hams Have IC7K's And Have Considered in "Parting Them out"

Richard, a 7000 generally will go between? $ 650...750;??the signalink can help you if you use wfview (free, open source)

Raspberry Pi and MFJ RigPi will do the job, cost approx several hundred dollars 73 VK3QA

Thanks Joe. I do have a Signalink USB that I used wir the 7000 when it was my main radio. Perhaps you are right through, there may be better radios suited for my need rather than trying to shoehorn

Richard, It would certainly be possible to configure an IC-7000 for remote control. I have remoted an IC-7200 successfully, but it has an USB port. Icom RS-BA1 software, or HamRadio Deluxe are options

I have not used my IC-7000 for some time. I was thinking of trying to use it as a remote HF rig at some family land a few miles from home. ?Does anyone know the best way to set up a 7000 to operate

Dear Friends, I am a great fan of icom ic7000, after extensive research on cpu failure of icom ic7000 ,if anyone has failed CPU i can fix the cpu even it's processor is failed ,but not burnt at pcb

I’ve used the Icom 7K for 15 years mobile, won 1st place field day three years running. Many Dx contacts anytime I’m mobile. Love the color screen, have it go to a nice 7” screen, lean on arm

I to really liked my 7000 mobile. That with a screwdriver antenna and I could work just about anywhere. With the control head mounted on a flexible shaft and mounted to a seat bolt I could use the

Gary, I was a big fan of my IC-7000 and when the IC-7100 came out I was unimpressed with the wedge control head. Fast forward a few years and I am looking for a new mobile rig having repurposed the

I agree that the 7000 is a perfect mobile HF rig. That is what it was designed for and what it’s successor should be. Small is better. The launch at the Dayton Hamvention featured young ladies in

I don't think that the IC7100 is going to last much longer. It has had to be redesigned to be able to source many of the parts that are now obsolete and in the arena of unobtainium. That said it also

Edit to add, neither Yaesu has 144 or 440 Sent: Sunday, August 28, 2022 10:33 AM To: [email protected] Subject: Re: [ic7000] Rumor mills time!!! 7000/7100 replacement? The 7000 was perfect for

The 7000 was perfect for mobile use. Having the head unit up high enough to be usable. The internals of the 7100 were/are a step in up in performance with the DSP but the head unit was an abomination