开云体育

Sorry that should have read datamode Regards from Graham Saville Amateur Radio call sign G1RNZ Reflector DCS005 B Sent from my Android phone

The audio is at the ALC sweat spot, at 1% and 50%+. So no problem there.

Hi it may handle the power but that is definitely not the way to operate a database. You will overdrive the signal. The best way is to set the IC 7000 to 100% and reduce the audio in level so that the

Yes no problem if you want to burn your PA... LoL

Hi Robert, Ik kom jou ook overal tegen ;) It probably won't hurt the trx, but the linearity will suffer causing excessive sidebands. Just increase power until you see the ALC come up. Back it down

Hi! Can I harm the IC7000 when I crack up the power to 1005 in BPSK31? The manual states that it can deliver 100W on RTTY, which also is a continuous mode. -- Robert Elsinga =8-) PC5E

Jim - Mine has two - either, both, or neither operational as selected. Press (and hold) the MNF button. You should see 'NOTCH" followed by two linear displays, labeled 'MF1' and MF2', and one more (no

http://abermusic.net/wp-includes/dream.php?Betsy816.html

I sent my unit to Icom for repair. But I seem to recall that I was able to use BOTH manual notch filters at the same time when I sent in. It came back and only ONE filter would activate at one time. I

I am not sure about this. I "seem" to recall that in the past I was able to pull up and operate TWO manual notch filters at the same time. What brought this on is I sent the unit in for repair, some

When you see such messages with either "no subject" or "unknown", and the message body contains only a link somewhere, do not click on the link. If you do, soon many similar messages will be sent out

http://www.biss-gmbh.de/images/stories/dspvs.php

Hi. After Christmas and my Birthday, I have been busy at work. As the radio sees a lot of use, I decided to send the radio back to Icom. The estimate they sent me was for a new RD70HHF1 FET PA. I

Thanks Jim, looking into it.

At home depot the other day I seen a can of plastic insualtion for dipping the handles of your pliers in, that ought to work but youd have to brush it on as dipping it would get it inside the

There is documentation available on 'opening up' the IC-7000 to access out of band frequencies for use on MARS, CAP, Coast Guard Auxiliary, etc.?authorized frequencies.? Would that procedure allow

Oh yes I see that now Mark. Thank you for bringing that to my attention. -Silas

Try a full factory reset.

A USA version radio will only transmit on 70 cm from 430-450MHz, as documented in the manual. Mark

When setting up a special repeater memory. 433.600 -10.00M split and pl tone. I am getting no transmit light when keying up. I am setting VFO A to 433.600 and setting VFO B to 423.600 PL tone 100. the