There is documentation available on 'opening up' the IC-7000 to access out of band frequencies for use on MARS, CAP, Coast Guard Auxiliary, etc.?authorized frequencies.? Would that procedure allow Silas to setup his special repeater split?
?
-- Jim, KG4FXV
toggle quoted message
Show quoted text
--- On Sun, 1/6/13, kf7ycz <kf7ycz@...> wrote:
From: kf7ycz <kf7ycz@...>
Subject: Re: [IC-7000] No transmit on -10.00M Split
To: ic7000@...
Date: Sunday, January 6, 2013, 2:52 PM
?
Oh yes I see that now Mark. Thank you for bringing that to my attention.
-Silas
--- In ic7000@..., Mark Krotz wrote:
A USA version radio will only transmit on 70 cm from 430-450MHz, as
documented in the manual.
Mark
On 1/5/2013 7:35 PM, kf7ycz wrote:
When setting up a special repeater memory. 433.600 -10.00M split and pl tone. I am getting no transmit light when keying up.
I am setting VFO A to 433.600 and setting VFO B to 423.600 PL tone 100. the screen shows FM-TONE on TX frequency. Turning on split, and storing into memory. Will not key up. When I do key it shows VFO B frequency on the screen and tone. It's also showing "-10.00M" @ bottom of screen, but no TX light.
I have verified other split frequencies to work, and all simplex, and other set repeaters work fine. It just seems to be this one repeater.
Any Ideas?
Thank you sincerely.
-Silas
------------------------------------
Community email addresses:
Post message: IC7000@...
Subscribe: IC7000-subscribe@...
Unsubscribe: IC7000-unsubscribe@...
List owner: IC7000-owner@...
**
"Spam, racism, name-calling, vulgarity, religious or political propaganda, personal insults and/or verbal abuse will not be tolerated in this group at any time. Any member posting such material will be placed on moderated status, and is subject to deletion and banning."
**
Yahoo! Groups Links
