开云体育

Just some info... Purchased a new FT 817 @ Dayton this year. I found extremely low Tx power & Tx audio only in the USB & LSB modes (all bands & both front and rear antenna). Checked SWR, changed

Barry W5WB wrote: Thanks for anwering all the questions about the AP-10A, Barry! The AP-10A coil and its hardware would be useful piece parts that could be mixed and matched with other antenna

From: ham73ch@... Date: Sat, 02 Jun 2001 20:53:34 -0000 Hi Steve, Could you please publish more info about the NorCal QRP BLT tuner You can take a look at

Hi Steve, Could you please publish more info about the NorCal QRP BLT tuner 73! Mike

FWIW, I got around to opening the FT-817 I purchased at Dayton (shipped to my home) today and noted two things. First, the ferrite bead is now part of the accessories. Second, the 7240 kHz birdie

Cc: FT817@... From: "Pres Waterman" <pres@...> Date: Sat, 2 Jun 2001 11:30:06 -0400 If you mean a "cellular" headphone ( and I am sure you do ) I have been

The BLT tuner is available...I just built one, nice kit....with a ribbon wire feeder and mini dipole i was able to work several states on 10,15,17 meters (ssb) on a quick test in my back yard

Anbody else going to SuperComm in Atlanta this week? It's a telecommunications trade show, for those who don't know. We could hook up for a malted/distilled beverage (or three) and swap

The user guide is less than helpful when it comes to knowing how to send a CTCSS Tone to the FT-817. The Opcode command chart lists: CTCSS Tone P1 P2 * * 0B P1~P2: CTCSS Tone Frequency

I just got my AD-1YM adapter and have hooked up my Heil Pro-5 and it works fine. I am a little unhappy at the adapter gymnastics for the 1/4" stero off the headset, but I added a Rat Shack right angle

Yes, Yaesu has. It's compact, well built, inexpensive, and guaranteed to not blow up your rig. It has the proper connectors on it. CT-62 is the model and it's $30 Pres Waterman W2PW c/o Patchogue

Gang, Has anyone built a simple RS-232 interface for the FT-817? Any replies or suggestions welcomed. Thanks, Karl - W5QJ

V1.4.604 of FTBasic is available for download at http://www.bob.freeth.dial.pipex.com/polarplot/download.shtml This version fixes a problem that crept in whereby an FT847 would be one tone off the

If you mean a "cellular" headphone ( and I am sure you do ) I have been thinking this one over, especially for bicycle use. The only problem is there is no headphone audio for receive present on the

The FT817 Group is a very active group that generates LOTS of messages. PLEASE change the subject line in your replies to posts/messages to reflect the subject you are talking about. This will

Hi John, I believe what Bonnie was asking me was if the B&W coil could be mounted in place of the MP-1 coil. That is the reason for the 1/4-20 to 3/8-24 converter. I forgot to mention that the

For those not in the know.... The MFJ is really a transmitter of abt 10mw .... If your using an antenna for multi-band with a manual tuner, the MFJ makes it very easy to setup for TX on the bands

nestoji@... wrote: See the June issue of CQ magazine on kite antennas. Nick WB4SQI

How about an MFJ 910? I believe this is a small box with fixed caps that can be switched to aid in finding a good match. Usually mounts at or near the base. I haven't seen anyone discussing this old

Or, to drill out the hole and tap 3/8-24. Should be enough stock left for that (though I think I'd prefer not to do it with a hand drill). Getting back to the bigger topic, though, as