开云体育

eBay, of course... https://www.ebay.com/itm/CCTV-Connector-4-0mm-x-1-7mm-DC-Power-Female-Jack-Socket-Pigtail-Wire-Cable-30mm/172679726864 Randall _____ Sent: Friday, April 19, 2019 4:56

I found it beneficial to attach a small box to the rear panel via the threaded boss serving as a chassis connection. The 817 is in the bottom of the box completely protected and the pp is mounted on

They have them in the local flea market. Other place to look is any thrift store. Get one with the right barrel connector and cut the cable Good luck. Doug Lynch President Aries International,

Where is that pigtail available ? Sent from AOL Mobile Mail Get the new AOL app: mail.mobile.aol.com

I will probably roll my own. I can buy a pigtail with a female 1.7 x 4mm socket and add a PP to it. Randall _____ Sent: Friday, April 19, 2019 3:31 PM To: FT817@... Subject:

Hi Randall: This is a case where the solution is to cut the cable that feeds the rig, and install a PP connector. ? And... you can install a PP connector on the piece you cut off, so as to make a

Does anyone make a Power Pole adapter for the MFJ-1317 switching power supply ? Tried searching, didn't find anything. https://www.eham.net/reviews/detail/6351 thanks Randall _____ Sent:

My CW setup using the U5 link attachment: It's handy but if you use it for CW and connect it to the rig you have no place for a key or paddle.? I tried an audio Y cable and it works great! Second

Google for: yaesu ft-817 anderson powerpole adapter And you’ll get a bunch of results/vendors, including one you can 3D print. 72 de Bryan, k0emt

The 3d printed adapter being sold on ebay is what i use now but after having owned 7 if these little beasts I have never had any connector issues and my windcamp battery works great after 6 years on

Running a FT817 using 28W of solar, Charge controller to match the battery, and a 12AH lithium is a good match up. I run mine with an 11 Ah pack, and 20W panel and a charge controller to match the

It primarily depends on how fast you want to charge the battery. The climate wherever you operate can also be a factor in that you need enough sunlight to capture energy. A lot of cloudy days

Tom, I have the BioEnno 28 & 120 w solar panels. They are heavier than some but are a pretty high efficiency compared to the stuff like Harbor freight. I like the Budipole Power mini for use with

I was wondering what kind of solar charger everyone uses for Bioenno batteries. I am considering a 12A battery and would like to charge it using solar power during field

The Power pole adapter product in EBAY is my item/design...so it's available if u need it. https://www.ebay.com/itm/132393671077 https://www.ebay.com/itm/132393671077 Ancel

Mike, I have the mfj power supply. Same problem.band I use it for 2 different purposes John, I could be a beta tester. ? Otherwise it be next month when I get my disability check. (Hence the

Believe it or not Randy, With over 3,500 adapters sold over the past 2 years, you are the very first person to ask for this. But I will investigate it and hopefully do a short run. But it won't be

Best of luck brother. There is nothing like the FT-817 for pure ALL-BAND and ALL-MODE operation. NOTHING! Vy73 - Mike - KD5KC. El Paso, Texas - DM61rt. SOTA W5T-Texas Association

https://www.ebay.com/itm/FT-817-FT817ND-818-PowerPole-PCB-adds-7-layers-of-Power-Protection/132393671077?hash=item1ed34719a5:g:AXQAAOSwPDBaBT5- Doug W1DMH

thanks to every one for their help, i am going down the power pole route with an external battery, which battery type i'm not sure still reading about that as well as taking in what you guys have