开云体育

Tracy wrote: difference. On lower HF frequencies, due to atmospheric QRN and other noise, that extra 6dB above QRP can really make the difference between a Q-5 QSO & a Q-3 in-the-noise QSO,

John O wrote: Absolutely yes! 73---Bonnie KQ6XA

I'm not a member of the sgc2000 egroup, so I'll just make it short: It's not a contest or DX rig, selectivity isn't very good and forget CW although I have operated CW mobile with it on occasion. It

Take a look at message 68 on this e group there you will see a pic of an IC706 used with a portable bnc base loaded 20m whip antenna resonating on 15m with a full length antenna of 9" running approx

I've been looking for user opinions on the sgc2000... would appreciate your view. Drop it into the sgc2000 e-group so as not to clutter this one regards steve

in One's opinion of a manufacturer is, of course, based on one's own personal experience. My experience with Yaesu is that they are among the best. Example. Had an FT-470 handheld that was

He said with a whip on a backpack! Don't forget to read before you reply! Its like the old addage. Engage brain before putting mouth in

Well... QROing up to 20 watts from five gives you - as everyone here knows - one S-Unit. Sometimes this will make a difference, sometimes it won't. Every operator of any experience knows that

I think one additional question on the poll should be, "waiting infant mortality proof" Remember all of the new VX5R's that people rushed out and bought with the CTCSS bug, howling speaker,

xtalradio@... wrote: Well, I have to say that you are dead wrong. Perhaps if you were using a dummy load as an antenna.... 5 watts is more than enough power on HF when the band is open AND

Actually, SHE (Bonnie) said with a whip on a backpack. Engage your own brain. Also, as pointed out, 1 S-unit is not gonna make a discernable difference. Furthermore, using the SG-2020 as the 20-watt

So, Bonnie, you are going to: - run an amp on portable power? - not operate SSB below ~18MHz? - use the MP-25 instead? - change your mind about the SG2020? - stay home and QRO? I'd love to hear

Bonnie -- thanks for this (and previous) info. The thing I'm a little concerned about is whether Yaesu will follow in the path of several of their product introductions and release a product that's

polrbear wrote: I've tried all sorts of whips on my various HF backpacks. The most important aspects for me have been flexibility, durability, and lightweight. For HF backpack, length=efficiency. 8

HF SSB Needs More Than 5Watts To Get Out... -------------------------------------------- Using various backpack portable HF SSB systems with simplistic wire and 3meter whip antennas at close to

Enter your vote today! Check out the new poll for the FT817 group: Have you ordered your 817 yet? o ON ORDER NOW! o Did not order o Waiting for some to show up o I won't buy it o

Has anyone thought of an HF antenna that can be used on the move? I was thinking something like an helecticly wound vert. Using 1/2" pvc with that foam pipe insulation over it to get a larger

John O. Newell wrote: I have had an SG-2020 for a few years, and it performed well as a portable both for NVIS and DX use on jungle and mountaineering expeditions to the Andes. For battery portable

Hi Gary! Hello list subscribers! Can somebody put a scan of this Ad into the files section? Here in germany the FT-817 is expected to be delivered in december, but up to now there was no yaesu ad

Basically, I looked at the LDG BA-1 kit and found a torrid in the junk box. Amidon something, same size as the ones used for the tuner. I wounded a similar one and mounted it inside the enclosure.