开云体育

Hi Frank, I doubt your battery is 1650AH capacity. I suspect it is 1650mAh.? ie 1.650Ah.??Cheers, ? Owen? VK6YBA

I just received a new 1650Ah battery and looked (quickly) through the manual for some sort of cross-reference on the charging. I see three levels for charge, 6, 8 & 10 hours. For a 1650Ah

Jeffrey, Look into the tools offered at http://www.pignology.net <http://www.pignology.net> I use "HamLog" with my macbook laptops to control my rigs with a cable. However, he also has a serial to

Hi Tim, Any Android or Windows tablet support Serial over Bluetooth, even newer ones (based on Bluetooth 4, but backward compatible with Bluetooth 2 and 3). None of the iPads, even the older ones

Does anyone know what tablets support Bluetooth Serial protocol. My understanding is a newer standard that may keep some older tablets from being used. My goal is to use a small tablet for

As I'm aware, iPad does not support Bluetooth serial protocol, so you cannot use it for CAT over Bluetooth. -- 73 Dan YO3GGX https://www.yo3ggx.ro

Hello Jeff, I agree I wish there were more apps on the iPad for control and digital modes. I also know there are plenty on androids. The best I have are from wolphi.com. Too bad no one has done

I use groups with my FT817 for repeaters to cover different areas. The groups are 20 memories per group. To use groups you need to select groups in menu # 34. If you turn off groups the memories

I have seen there is Android apps for the 817. And I already have the blue tooth adaptor for it. But I do not know of the software or appplication to be able to use my iPad Air 2mvia Bluetooth fr

I would be interested in hearing how members are using the 817nds memory and group categories. I understand that you have 10 groups and each group can hold 20 memories. As part of my planning I

Good point, thanks.

Used to use 24v on commercial 12v for this reason. Problem is once capacity goes down current soon drops so you dont get much more for your money compared to two 12v in parallel.7ah is 7ah however you

I would try to find a decent Android Tablet running KitKat (4.4), Jellybean (4.1-4.3), or Ice Cream Sandwich (4.0). 817Companion supports more functions than pRxTx, but won't run on anything newer.

Hi steve go for a 4 cell, the use a bridge rectifier to drop the voltage a little bit, the amp has a over voltage 16v diode fitted that will crowbar and short at that voltage and blow the fuse it

Hello Everyone! Thank you all for the great responses. I've included two below (I hope they get all the way through the yahoo system...) The first is the very first reply I saw to the group from

I have just acquired an MPX-50M and I'm wondering what is the best way to power it. My current thinking is to get a 5 cell Lipo at 8mah this outputs about 18.5 v, I will then put this througha buck

Jonathan, /"Be Prepared!"/ the FT-817 will do FM just as well, if not better, than a 2m Baofeng. What's the exact problem? Generally, when the 817 is set to 2m (144MHz) with the band switch, and

Hello Bill here N3GTY I use my FT817 from time to time as an APRS Fill in Digi for Packet I must use the Microphone input for FM if not all you will get is a Carrier transmitted For sound card

What port on the 817 are you using for the data, rear data port, head phone jack for rcv or mic??? If using rear data port the rig must be in digital mode, selected with the right/left arrows on

Select user for SSB and packet for FM.