开云体育

I sent mine to Yaesu in California.? Very happy with the repair and I thought the cost was very fair. -- Rob VE3RXH

Hi, when does not found an repair person, I have an address in Switzerland, Write me when you not found an repair center in our city. Vy 73 de Martin HB3YDM

Please remember the original Winamp battery has 9-12.6 V normal voltage 12.1 V Normal capacity 3000mah/33.3Wh

Yes Jerry I use a great guy in South Dakota. He worked on my 817, Kenwood 2000, and Kenwood 450SAT. He does not take credit cards but the best thing is he will not charge you until you get the radio.

Or herre directly by Windcamp. https://www.windcamp.cn/productinfo/375211.html

is there someone outhere who i could send my radio to so i can have it repaired? as i had it hooked up to a 2 meter amp and something wierd happened and it was backfeed with rf somehow and burned

Sorry, the configuration is one 3-long string of 2 cells in parallel (not 2 parallel strings). I dug deeper into the reviews. People say there is indeed a built-in charge balancing in the Aili

I use a palm radio pico paddle attached to the underside of the FT817 when doing on the air cw. But i go on VBAND website to practice a lot, and for that i detach the key from the radio connect it to

Thanks every one. Think Ebay will do the job. Appreciate it. Dave -- 73's de NU4N

https://www.ebay.com/itm/166192020661?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=ugvi3nxzqhq&sssrc=4429486&ssuid=zRJG2-U2RkS&var=465744565380&widget_ver=artemis&media=COPY Many of the kits on

Just looked on Ebay. Mostly the battery-plate-charger kits. Or same kit with the plastic stand.I've had good luck with the Windcamps (have 2 FT-817ND's)73, Rich W1GBBSent from my Verizon, Samsung

Thanks Kevin for the reply. I am trying to find someone that just sells the battery alone. Not the charger or battery plate. I already have that. Just need a smaller battery than the 8 cell one I

If you have not done so yet I would highly recommend just going with the windcamp battery. I’m not sure what you are running but the windcamp has been excellent for me. Works great for my POTA

Ok Martin the battery is a 8 cell 2000mAH. Size is 4 inches x 2 1/2 inches. Takes up the entire compartment. No way will the Wind camp panel I ordered will fit. Dave -- 73's de NU4N

Thanks for the reply Martin. I will open the rig up and get back to you. Dave -- 73's de NU4N

Hi Dave does you have an pictures from the Battery with the technical data? Vy 73 de Martin HB3YDM

Thank you for the quick reply, Bruno. I've used a Vibroplex semi-automatic key and a Lionel (I still have that) so I'm used to dits with the thumb and dahs with the index finger. In this case, though,

A hint about the battery you have would go a long way in getting feedback comparing the physical size of your battery to that of the windcamp battery... Ken, N2VIP

I recently ordered a Wind Camp Battery plate. Seems the battery I have is too large for the plate.?? Dumb question, is the Wind Camp Battery that much small than the battery I? have? I assume