开云体育

another option is Solberga gear driven drill

Hi Tom, PM 2820 looks like a great DP. Nova Voyager is in the same price range but viking is half the price so it fits my budget for an unplanned purchase. Like you I am not thrilled with electronics

Hi David, This is an older post from you and it says something important related to 1100 vs 1300 outrigger in conjunction with 2500 slider. May be worth confirming if this is still true. “A 2500mm

Hi Imran, I just picked up a new drill press myself. I have a very small shop, so I wanted a drill press without the motor hanging off the back, which limited me to the Teknatool Voyager/Viking, the

“ So my 2 cents is, go with the short stroke slider if you are fine using a track saw to break a sheet down before you make cuts on the KF. You can also make really good straight line rips with a

And once again I forgot one more thing.?? The other day, I just happened across this video that shows a hands-on "feel" comparison of Hammer and Felder saw-type machines.? This could be helpful t

Thanks, David, for all the details on the different combinations of outrigger/fence and how they work.?? Follow up on your statement here: "With the 1300 fence on the 1100 outrigger table, you can

Hi Tom, I was told the same by the Teknatools person I spoke with yesterday. FWIW, he said they received a large shipment of lathes etc recently. He also said that they will continue to honor the

It is my understanding that Teknatool is reorganizing, and will no longer be selling through retailers (Woodcraft, Rockler, Grizzly, etc...), and in the future will be direct to consumer. -- Tom

Aaron, I have both but was referring to the Euro guard.? The pork chop guard is a piece of junk. Steve

Stan, I'm neither a hobbyist, nor in a small shop but I can offer you the perspective of someone who is fortunate enough to have all of the configurations you are considering. Our shop is 40x100, a

Thanks David for clarifying the outrigger options. I know one member who bought a used KF700 with 1100 outrigger and it did not have the 90 deg stops as shown in the pic below but he was able to add

Thanks, Jonathan. Imran Malik IAM Wood Creations https://www.facebook.com/groups/362481112015700/?ref=share

Hello all, I'll try not to repeat most of the excellent points already made here, but I had similar considerations, so I wanted to share my experience—and add another voice encouraging you to go as

Stan, The 1100 outrigger tables for the Hammer line is a totally different beast from the 1100/1300/1500 for the K500 and K700 series. It’s much lighter weight and attaches to the Hammer sliding

This makes a lot of sense and actually explains why the 1300mm Hammer fence shares the option code with the larger outrigger fence on Felders and not with the 1300mm fence. Despite how heavy and

Imran, this one reference's off the slider. Kindest Regards Jonathan Samways www.fineinteriorwoodwork.com www.richardmartinwindows.com *Este mensaje se dirige exclusivamente a su destinatario y

Here are some clarifications. The KF500 utilizes the X-Roll sliding table, so the bolt-on items (outrigger tables, crosscut fences, butt-bar, edging shoe, clamps, etc) that apply to the KF700 also

Hi Stan, As a reference, here is a picture of what my K700S unit looks like in my garage (which is exactly 20 x 20).? I have the 1500 outrigger and the full size 1250mm rip area.? The machine is

Hi Stan, The outrigger glides along the length of the slider with unlocking of one kip lever. So you don’t need to retract the slider all the way to make a cut. On my 10’ slider, I routinely have