开云体育

Bryce, I'm not sure if it was you commenting when you had upgraded your cutterhead, but the revelation that it seemed to lack the power that it had with straight knives combined with the intimidation

Just got a new saw today! Ordered in March, so it has been a long wait. Unfortunately Felder shipped someone else’s slider with it. The first thing the rigger brought in was that incorrect slider,

How do you know that Rod? i.e have you stretched out the tire to find out, like so... Or measured them?.... As the profile disappears when the rubber is bent around a circumference I didn't find this

That looks like a much nicer looking head than the one i put in my CF531. One thing i noticed when i did, was that the machine seemed a little underpowered compared to the original 4 knife head. In

Tom, the FB510 tires are rectangular in profile, they aren’t meant to have camber. Regards, Rod.

Understood. I'm having the same challenge - it doesn't look like there's an 80A GFCI breaker.

in hindsight I should probably use a larger breaker, but I am only using a 60A breaker. When I installed the breaker, I only had a single 3P machine that use 5.5kW so I thought I have plenty of

Thanks for the info! Are you using an 80A breaker on the PTE010? Can you share the product you're using for that?

Just saw this video. Seems very affordable and may offer solutions to larger machines as well. Looks just like a Silent cutter head. https://youtu.be/I8XOZ3K2raA?si=BGGV4v9LHF9sMVmY PK

First, I miss your posts Sang Luu, hope all is well with you. I may be wrong but IIRC, Sang Luu started #rfp thread. So here it goes. The best part of woodworking, for me, is to be able to use couple

Hi Aaron The weight of the A3-31 is enough to prevent any movement when work is passed over or through the machine. As a result, I leave it resting on the wheels. The original lever/lift actually is

Hi Due to my past inexperience on usage and tuning of a bandsaw, I think all my blades have developed a lateral wobble in them (measure at proper blade tension without the guides engaging as close as

Thanks all, I have ordered 1/2" and 3/4" Wood Slicer blades and will update here with my observations. Cheers, Rob P.

The way I see things is the tires are telling you something, Not convinced on the new green tires either, they look to have little camber (which is imperative for one who wishes to attain the most

Great thank you for the info

Hi Chris, that was a common failure with the tires on the FB510 at one point. Felder have a new tire 505-15-4562 which is green in colour and seems to solved the issue. Regards, Rod.

I'd guess the wheels need to be aligned if it's throwing tires, sounds very dangerous, as per an ongoing thread on lumberjocks, of which below I've screenshot. (yes it seems the RPM was altered, but

David, that picture says it all. Seeing that just had to make you feel sick. I don't understand why, for an extra $300 of heavy OSB, they would not enclose the machine completely to protect such a

That looks more like a freight company issue than the Felder crating work.

Laguna recharges Resaw King blades for reasonable prices. They are good for veneer slicing. Adjust for drift and parallel cutting and feed at a steady rate for best results.