开云体育

Wait a minute…. You seem to be mixing inches and metric. Two and a half divisions on a .0002” per 10” level would be roughly .0005” in 10”. That is roughly .012mm in 250mm. I don’t know

The middle bolt is also available on the K3 slider line. After leveling the machine with After adjusting the leveling feet and let the saw rest for a day or so, the cast iron top moved a bit. I did a

Hi Chad, You may find following link helpful. The x-section of the short extension table is same as the long one used by Felder parallel fence. IIRC, I predrilled for correct hole size but it was

Hi everyone. I'm attempting to design a parallel fence that will attach to the short Felder table extension and be removeable like the longer Felder one does. The short extensions looks like it is the

That's helpful Brian. I'll take it apart and adjust the chain drive.

Thanks, Jonathan!

Thanks Michael and Alex. Got it. I will look into the documentation to learn more about the Grit solution. Oddly, it never came up on my searches. Imran Malik

Hi Michael, Are you talking about a complete air cleaner unit or a sensor which I could add to my air cleaner? Imran Malik https://www.facebook.com/groups/362481112015700/?ref=share

Yes, it turns on based on air quality…you can set the thresholds and to it manually from your phone also.

Hi Alex, I assume you mean that I could turn on my air cleaner when my dust collector is on or a machine is on using Grit Automation. However, what I am after is to turn it on based upon air quality.

Hi Imran, Check out Grit Automation. I use their system to automatically start and stop my dust collector, open and close blast gates, and turn on, and off, my Jet air filter system. It can be used as

No obstructions that I can see. ?Here are a couple of images which might help visualise the design. Chips are sucked up through an opening (410 x 84mm) directly above the cutterblock. That inlet is

Hi JP, Something is not right. My experience is similar to Tom G. I have no experience with Hammer but before RL125, I used 1000 CFM cyclone. OEM measures 1000CFM with 3ft straight pipe connected to

All of this seems fine. This is the only machine I am experiencing a problem with but the magnitude of material from the thicknesser is vastly more than any other machine. The closest in material in

Hi JP, That sounds like a frustrating experience. Which portable extractor are you utilizing? Prior to acquiring my RL160, I was using my A3-41 combination jointer/planer with an Oneida Mini-Gorilla (

Has anyone else noticed that the extraction on this thicknesser is poor? I have it hooked up on a very short run to a portable extractor with 5" hose. The extractor is rated at 2500 m3/h which is well

As I mentioned in my Dylos thread response, I would like my air cleaner to come on automatically when the air quality reaches a certain level. Anyone aware of a meter that also has an output which I

Seeing the dylos love here definitely makes it a recommended purchase BUT it doesn't seem like it is designed well for online monitoring without adding additional hackery to data collection, wifi,

Greetings all, Does anyone know if the "Thick-Box" display for table height can display in Inches instead? Thanks, Karel

No, Off the 120 or 240 tap. PK