开云体育

I'm looking to buy a festool ctm36 vac with the plan to use it with a kapex saw and orbital mainly. The vac come standard with a 3.5m 27mm hose, but you can also get a 3.5m 36mm hose. I've read that

Tally Ho launched a few days ago. A lot of awesome woodwork in that boat! There is more to do before she sails away, but I suspect the bulk of the woodwork is done. David Best - thank you for

Hi Noah, Also new to Felder, but I believe 0.01 inch is the tolerance their technicians will work towards. This doesn't mean you must have a 0.01 inch difference if you are not happy with the

Hi Noah, If you can pay handsomely, just have Felder come out and do a calibration on the machine.? I've been pleased with the skill of their techs, and I always learn something when they come

Hi, send me a pm please Regards, Rod

It looks like people use a wide variety of methods to manage particulate matter suspended in the air in their shops. The particulates that are the most hazardous are nearly invisible to the naked

Several yeas ago I purchased a Dri-Eaz HEPA air scrubber for use on-site in customer's homes when performing particularly nasty work such as plaster demolition. It doesn't see much use these days, but

FWIW, I bought a whole house squirrel cage blower for $20, 20 yrs ago. Built a plywood box, 2’x2’x4’ long. There are 3 stages of filters all are 2’x2’. First is a cheap furnace filter, 2nd

I quite like this new machine also, I may gonna pull the plug on this rather! Thank you!

This is excellent feedback, thanks so much for taking the time!

More than likely, you’ve left your wheel engaged when not using the planer. martin/campshure/co/llc mac campshure 7412 elmwood ave. middleton, wi 53562-3106 608-332-2330

My planner is not engaging / slipping at higher speed setting.? ? I noticed this after maybe setting my depth of cut a little too deep on a wide board (my mistake). I took off the back panel and

Here is my experience and viewpoint. I purchased a Dylos DC1100 Pro Air Quality Monitor a few years ago when I was troubleshooting a fireplace that wasn’t drawing well. I did some research including

I have a Laguna version of that device. I cannot find n English-language version of that site to be sure, but it looks very similar. I rarely use it, as my dust collection works pretty well and I use

I’ve owned a Jet AFS-1000B filter that looks just like that for 8 years…works well for cleaning the air but is loud, and very heavy when you try to mount it to the ceiling. Jet has redesigned the

Hey all, I am struggling to get my A3-41 jointer tables to correctly joint a board without any concavity. I've got the tables coplanar (points of contact at the throat and ends, they aren't flat

Hi there, definitely won't be running 3 phase. Looking at Laguna c flux 3, Clearview (looks too tall), Sherwood

Also, wondering how often you need to change? a fine dust bag vs the course bag shavings? Running buzzer/thicknesser, saw, bandsaw. Chris.

Hello Everyone, Are you aware of this device? https://www.felder-group.com/de-ch/shop/luftfilter-sc449842/number-1-luftfilter-lf-950-sp449841 There seem to be a similar offering in the similar price

I think you are expected to get the machine in position and connected to power and dust extraction before the tech shows up. The tech and I worked together to install the slider on my saw. I had the