|
Re: 3d Dro stop
Checked out some print sites. Wow! Anyway, I like the darker blue, or I can do them in black. $25 each plus shipping. Paypal, cash app, venmo or? a check is fine. I'll also upload the file to the FOG so you can print them yourself, or someone else can print them. It's called Kappa Fence Extension... Let me know at my email. Thanks Bill B¨¦langer On Fri, Dec 31, 2021 at 9:50 PM Jack Decker via <vernaculardesign=[email protected]> wrote: Excited to see how it comes out.? |
|
Re: 3d Dro stop
Bill,
I am immediately ready to buy one (or two, since I inevitably will sacrifice one in the next few years) from you in whatever color is easy for you.? Blue is great!? So is Format 4's version of silver (RAL 9006)! Just let me know how to pay! I would also offer all of the other bribes that others are listing, so just let us know! PK PKwoodworking |
|
Re: Felder K940S
¿ªÔÆÌåÓýDavid, In your pictures, I noted the overhead saw guard¡¯s shield for angled cuts stowed under the rip side extension table. Is that the factory location or did you move it there? On my saw it is stored under the rip fence bar. While it is not in the way it does get sawdust on it that I end up cleaning often. Should not be too hard to move. Imran On Dec 31, 2021, at 10:03 PM, david@... via groups.io <david@...> wrote:
?Felder does not provide leveling feet with their 700 and 900 series machines. ? The unthreaded hole in you machine base ?is 11mm. ?Here is a link to the leveling feet I use and recommend: David Best https://www.instagram.com/davidpbest/
|
|
Re: Felder K940S
¿ªÔÆÌåÓýFelder does not provide leveling feet with their 700 and 900 series machines. ? The unthreaded hole in you machine base ?is 11mm. ?Here is a link to the leveling feet I use and recommend:David Best https://www.instagram.com/davidpbest/
|
|
Re: Felder K940S
I have the same saw and had to drill a couple holes to install leveling feet. The 10mm shaft works ¡°ok¡± ?and I also chose the larger foot for looks but starting over knowing I would need to be drilling holes I would have used a larger shaft, likely 3/4 for the more extended back two feet. On a level floor all would be well, mine is on a sloping garage floor facing the door making the most extended foot approx 4¡±. Method of hole drilling was right angle attachment on cordless drill with stepped drill bits (harbor freight ones work well). Lifting was done with a pallet jack and blocking.
-- Mike B |
|
Re: 3d Dro stop
I was just poking fun about putting your name in it but I can if you really want me to? Do you have a preference of color? I¡¯m actually going to make mine blue. It¡¯s almost done I¡¯ll send you a picture in a few minutes. I¡¯ve been printing the stupid things all day long it seems like one dimension or another has been off all day by tenths of a millimeter? Bill On Fri, Dec 31, 2021 at 19:22 Glen Christensen <grchris1966@...> wrote:
|
|
Re: Felder K940S
My leveling foot for the Kappa 400 Bill Belanger On Fri, Dec 31, 2021 at 18:21 <jppetricca@...> wrote: Hi, |
|
Re: 3d Dro stop
Bill, I like it. Are you willing to make six or so? just let me know what I owe you. Time, materials, cocktails, Ect. Thank You I'm not sure about mauve but do you have Hot Pink?? LOL Glen Alpine Moulding and Millwork Inc. Mail: ?? P.O. Box 486 ?????????? Murphys , CA. 95247 Shop: 441 Pennsylvania Gulch Road ????????? Murphys, CA. 95247 ????????? 209-540-7501 LIC # 707507 On Fri, Dec 31, 2021 at 1:26 PM Bill Belanger <Bill@...> wrote:
|
|
Re: Felder K940S
¿ªÔÆÌåÓý?Like Brian I also have never heard of Felder supplying leveling feet. I assume the holes you are speaking of on the right side (facing machine standing on the rip side) are located in the main cabinet¡¯s front & back corners. On my K975 there are two more, one on each end of the extended chassis under the slider. These are accessed by removing the panels in the rear (standing facing the control panel) of the said chassis. For this reason, they may not be easy to spot. Imran On Dec 31, 2021, at 8:21 PM, jppetricca@... wrote:
?Hi, I¡¯m new to the group. I just received my Felder K940S sliding table saw. I called Felder before it arrived and they told me it comes with leveling feet. I¡¯ve just finished unloading it and took it off the crate with my pallet jack. I can¡¯t find them in any of the poorly labeled baggies that all of the nuts and bolts are in. Can anyone confirm that the saws do in fact come with leveling feet (it appears there¡¯s only holes for two on the right side of the saw). If it does come with them can someone please provide a picture of what they look like. This group is awesome by the way! Thanks for your help! |
|
Re: Which wax paper to order?
I'm with Mark on not giving Uline my money.?
We use brown craft paper for these types of protective uses. We get it at Litin Paper on Plymouth Ave. It's totally adequate for the purpose, it's recycled and recyclable. We even use it in the vacuum press for epoxy glue ups. Jason Holtz J. Holtz Furniture 3307 Snelling Ave. South Minneapolis, MN 55406 612 432-2765 -- Jason J. Holtz Furniture 3307 Snelling Ave. South Minneapolis, MN 55406 |
|
Re: Help - RL160 shuts down on its own, trips breaker after a few minutes
#dustcollection
#electrical
I'll second Imran's suggestion of confirming that the motor is wired correctly. I just received a new 3ph RL160, and the instructions are very insistent on confirming that the motor is spinning the correct direction, and that improper rotation could result in overheating.?
For my machine, Felder wants the motor rotating clockwise, and they want the BROWN wire on the High/manufactured leg of the three phase (if present).? -- Tom Gensmer Heritage Home Renewals, LLC Minneapolis, MN |
|
Re: Help - RL160 shuts down on its own, trips breaker after a few minutes
#dustcollection
#electrical
¿ªÔÆÌåÓý?I should add that you can try cleaning the filter as well. There is the differential pressure switch that indicates filter needs cleaning. It is however not reliable, as many folks state that the light is always on on their unit. Differential pressure switch only controls light on my unit and is not able to turn motor off. Since you are having a thermal shutdown it indicates hot motor. I noted you mentioned that breaker also tripped. That would indicate high current. There is a possibility that the motor is developing a short therefore overheating. So I would check amps to confirm that there is not a short. You should not see current greater than nameplate FLA. Imran On Dec 31, 2021, at 12:01 PM, imranindiana via groups.io <imranindiana@...> wrote:
? Jay, Is it a 3 phase motor? If so and if it has never run differently swap two of the 3 wires to change direction. This happened to me when I wired RL125. It pulled deceptively enough air that I did not suspect that the blower direction was backwards. If that is not the case then my next step would be to remove the filter and then run it to find out if the plugged filter is causing the issue. My $0.02 Imran? On Dec 31, 2021, at 10:58 AM, jbowen@... wrote: ?Hi, I have an older RL160 I bought from a forum member this past summer that is like new condition. Unfortunately I am running into issues with the RL160 shutting off after about five minutes of use generally any operation that takes more time than cuts on the slider. This RL is connected directly to my slider with <4' of flex and no sharp 90s and I would switch the hose to my joiner/planer where it would shutoff. Yesterday I was doing some drywall work which created some dust in my shop so ran the RL160 without it connected to anything to clear the air and after a few minutes the breaker on the machine tripped. After checking with the previous owner he had the same experience I did but Felder suggested it was his wide belt sander produce too much material and he didn't pursue warranty with them at the time. In all cases it is the machine side thermal breaker that trips.
I was hoping the forum members could suggest where to start diagnosing the problem or suggest parts I could replace.? Anyone else have this issue? Thanks, Jay B. |
|
Re: 3d Dro stop
¿ªÔÆÌåÓý
Looks nice!!
From: [email protected] <[email protected]> on behalf of Bill Belanger <Bill@...>
Sent: Friday, December 31, 2021 4:25:48 PM To: [email protected] <[email protected]> Subject: Re: [FOG] 3d Dro stop ?
Too fancy? ???
Bill
On Fri, Dec 31, 2021 at 13:41 JP Rice via <jprphotos=[email protected]> wrote:
For those without a 3D printer, it was extremely easy to make my own from scap wood. Made wooden piece to fit inside the extrusion and attached a piece of Baltic birch plywood to it with two screws. With bottom piece of BB plywood is attached with two screws so it is easily replaceable.? -- Michael Marsico |
|
Re: 3d Dro stop
Too fancy? ??? Bill On Fri, Dec 31, 2021 at 13:41 JP Rice via <jprphotos=[email protected]> wrote: For those without a 3D printer, it was extremely easy to make my own from scap wood. Made wooden piece to fit inside the extrusion and attached a piece of Baltic birch plywood to it with two screws. With bottom piece of BB plywood is attached with two screws so it is easily replaceable.? |
Bill Belanger
PK
Jack Decker
imran
David P. Best
Jason Holtz
Tom Gensmer