开云体育

Imran, I got those P rail Aigner mounts David mentioned and here's a couple of pics of a P rail to F rail mount that's super easy to make.?JohnJMK Services

Thanks David.

https://www.molykoteproduct.com/content/dam/Dupont2.0/Products/molykote/literature/en/Molykote_G-4500_Synthetic_Grease.pdf David Best - via mobile phone

Okay, since there is no response, I will ask the question differently. What are you using to lubricate the Saw Height/Elevation guide. I assume all motorized saw have this maintenance requirement.

that's what I'd do.? The Hammer? scoring is? pretty primitive. It works but it is uncomplicated and relies on simple mechanisms.

Hi Lucky, thanks for the details that really helps as your thoughts are in line with what I would want if I add the power drive option, I had remembered hearing about some issues but now I do think I

Hi David, Thanks for the link. I also see what you did with two modified couplings with flat bar in between. Do you use that often? The angle bracket is too limiting where it would not accommodate

Tom, I sent you a PM, if you are interested in one since Randy’s sold. Imran

Hi David: Good to see you posting on FOG. You’ve been missed. Warm regards, David Lucky Dr David Luckensmeyer Business Manager Luckensmeyer Medical Pty Ltd melissaluckensmeyer.com.au and Designer

No..sorry..It sold in minutes..I was surprised.. Thanks though Randy

I’m ran, the P-channel pressure module coupling including Felder part numbers is documented in this series: https://flickr.com/photos/53698949@N05/sets/72157679368916583 David Best - via mobile

The angle brackets may raise the pressure module too high for your application. Thanks, Chris Perren 512-415-6951

Aigner makes angle brackets that can be used with their regular mounts https://www.scosarg.com/aigner-angle-bracket-i Dave Davies wrote:

Not sure if this helps but Felder has a p channel attachment that can be used with aigner accessories.

Chris, I found this on eshop: Looks like you were able to buy just the part that mounts on the p rail in the item above. I can see why it would be advantageous to have the flat bar. It would allow one

I believe one will work although I just received my Aigner pressure module a few days ago. I’ll test it tomorrow. Thanks, Chris Perren 512-415-6951

Chris, Thank much for quick feedback. Do you need two to support the flat bar in between? Did it come with flat bar? I will check eshop but likely it is still messed up and will have to call in. Imran

Hi Imran Felder makes an p channel adapter that may help. I order a couple from my Felder sales guy. Around $50 each plus shipping. Thanks, Chris Perren 512-415-6951

I did electronic search on survival guide for Aigner and only came up with distometer. I know David Best has machined the p coupling (may be two of them) to accept the Flat bar but are there any other

On my CF741 I have power drive for the shaper only. I have the hand wheel read outs for the table saw and have height set to the only thing that matters to me- dado. The angle readout on the handwheel