On Jun 14, 2020, at 3:34 PM, imranindiana via groups.io <imranindiana@...> wrote:

?Okay, since there is no response, I will ask the question differently.

What are you using to lubricate the Saw Height/Elevation guide. I assume all
motorized saw have this maintenance requirement. Please share if this is not
correct.

Thanks,

Imran

-----Original Message-----
From: [email protected] On Behalf Of imranindiana via groups.io
Sent: Saturday, June 13, 2020 2:32 PM
To: [email protected]
Subject: [FOG] What Grease to use for Saw Height/Elevation Guide

K975 manual says to grease the saw height guide every 40 hrs or monthly. It
does not mention/recommend a grease type. I have grease for the shaper
spindle in the gun. I forget what it is but it was recommended here and I
got it from NAPA store. Is it okay to use for the saw height?

Imran