开云体育

I have a program that needs the Biamp Tesira v1.7 modules updated to v3.3, but they aren't like for like. The v3.3 modules all have an Integer_Parameter called "Command_Processor_ID", and the old v1.7 has a Buffer_Input "From_Module$", and a String_Output "To_Module$". Do I need to use an Analog Init to define the Command_Processor_ID? Main reason the update needs to be done is Mic level/muting as well as dialing pad don't work on v1.7. I read that if the processor was a CP3N or newer, v3.3 must be used. Not quite sure why the integrator (won't name name) did not update when they originally coded the program. I also can't seem to load the Biamp config file to a test Tesira, to workout the kinks at my desk rather than the conference room, which is used quite heavily.

Has anyone interfaced with a Barco CTRL room software using Crestron?

I did ask this on the Crestron Discussions forum, but it seems to take days to get a response there. So posting here in the hope that you guys can help out. On a TSW panel, I can send an image to the panel like this: \images\icon - camera 100px wht.png The actual location on the panel is in: /display/swf/images On a TST, sending \images\icon - camera 100px wht.png does not work. The location on the TST where this graphic is stored appears to be: /display/app/project/assets/img Attempting to send: \display\app\project\assets\img\icon - camera wht 100px.png Yields no image What is the correct path to retrieve an image from the TST? I've tried a few combo's but nothing seems to work.

Hi All, I have a DMPS3-300-C that I want to talk to a Mipro wireless receiver using RS485. I have done this with a CP3 (native RS485) and so I know that my code and wiring works. What I cannot get working is RS232 to RS485 conversion on the DMPS3-300-C. I have tried 3 different RS232 to RS485 adapters (ie 3 different models) with the cable that works on the CP3. I tried every available hardware handshake setting on the RS232 port. No joy. I have even tried using ST-COM (2 different units), still no joy. Has anybody ever succeeded in doing this? Any ideas? -- Cheers Phil

Hello everyone, I want to control DT8 driver using DIN-Dali2 module. I have already controlled DT6 drivers. My issue is when I add DT8 driver, it takes one address. How I can control a CCT led strip using simpl program. Currently I have CP3 processor and up to date firmware and database. Needs help/guidance to configure DT8 drivers. Thanks in advance for support.

Has anyone attempted to control the Pentair Intellitouch or Easytouch using the Screenlogic Protocol Adapter? Pretty sure this is a long shot and there's no drivers or documented commands, but it does apparently offer a ethernet to Pentair bus interface.

I'm hoping to use one of these in my sons apartment but having a little trouble wrapping my brain around setting it up. First question is, is there any benefit to connecting via Ethernet over cresnet? If I use cresnet, i only need a 10 inch long cable direct to the processor. There will only be 4 sources accessed by 2 TV's. (Living room and bed room). I don't need audio breakaway. I'm missing something here. Looking at it in program mode, I'm not seeing what initiates the input and which output you want to send it to.

Using either the SSH or TCP driver in Extron GC Pro, is there a way to connect an IPCP Pro 550 to a Crestron NVX endpoint and tell it to set to a certain multicast stream, start video, etc? I have been searching everywhere for commands that could facilitate this, but cannot find anything? I am trying to do this without a crestron processor intermediary. This is similar to an earlier post I made, but this is spurred on by a question from a colleague who absolutely does not want to use a crestron processor to switch one D30 between two E30's.

Howdy, I am a programming novice, and mostly deal with modifying existing code to add basic functions. I have been trying to integrate 6 NVX's(NVX350,352, 2 D30s, and 2 E30's) into my complex A/V system(two 3- series processors and a 64x64 and 128x128 dm matrix switchers, and a whole lot of endpoints) using a DIR-160, and am a bit lost on how the programming logic should go. I've been told that the Director should act more or less like a DM switcher, but I am not sure how the logic with streams should go. It seems to me that with or without the director, I still need to pull the individual streams into a serial strings for the logic. would I be correct in saying so? My main goal is to get some hands on experience, as there is an expansion that will be all NVX based, so I want to have a head start on how to use these devices. Thanks!

Wondering if anyone has had issues with Sonos devices all dropping offline after a reboot? We have a rather large network and Sonos devices are on two switches in two separated racks connected over fiber. What's interesting is I get "Multicast Success" on the diagnostics page but all of my devices show up not registered. Wondering if I may still be having some kind of multicast/ network issues. Only major thing of note in my opinion is that our router/ primary managed switch are not in the same rack as our Cp4-R. Thanks!

Hello, I'm coming from an AP3 system and just finished setting up Crestron home OS 4. I'm facing two major issues between the 2N and the TSW-1070: 1- Whenever a call is issued from 2N the touch screen will only display the outdoor camera with action buttons as long as the call is still ongoing so panel needs to keep ringing otherwise it's not possible to see who's outside 2- It seems that it's impossible to change the ringtone of the touch panel and I must admit I can't stand it. With the AP3 it was a bit more complicated but one a call is initiated a 3 seconds ringtone is enough to display the RTSP page with the action button until I open the door or reject. Also I was able to play any ringtone using http commands... All this seems impossible with OS4 or I'm missing something? Thanks.

Hello group! I have been tasked with specifying a security system from the Works With Crestron Home list. Does anybody have any personal reccomendations or caveats concerning any particular systems? Would like to use Honeywell or DSC because of availability through our partner, but can go another route if anything integrates particularly well. Thanks!

I've built a project in Construct as a TST-1080. I don't have a physical panel to test it with. How can I launch the panel like I would do with an SG XPanel? Looking through the online CTI videos on YT - no clues there. Thanks

Has anyone here done any work in a Gulfstream private jet? If so do you know if there's a way to control the onboard video switching and amplifier source selection?

Rachio is a household name in smart residential irrigation control. Rachio is now expanding into outdoor lighting control. My latest article looks at their first outdoor lighting control product. You can find the article here: https://restechtoday.com/rachio-expands-into-landscape-lighting-control/ For those interested in earlier articles that I've written, you can find those here: https://restechtoday.com/author/jaybasen/ For these interested in even earlier content that I wrote, you can find it all here though older content has formatting issues due to a transfer from blogspot to wordpress. https://topicsinhomeautomation.wordpress.com/ Thanks

For those using my Crestron-Hubitat integration driver that allows you to integrate hundreds of different Zigbee, Z-Wave, and off-the-shelf IoT devices with a Crestron system I wanted to let you know that I've uploaded a new version of the Crestron-Hubitat integration code to my GitHub (https://github.com/jbasen/Crestron-Hubitat-Integration). The new version adds support for: 1) Double-Tap and Press-Hold events for switches and dimmers. Note - not all switches and dimmers support these events. It has been tested with devices from Zooz. 2) The multi-sensor module now supports all the sensors in the Aeotec MultiSensor 6. Enjoy Jay

I'm pretty sure that the answer is no, but is there any way to trigger a reserved join number programmatically? EX: I want to launch the App Setup screen (res.Join 17242) from a running VTP project, but I want to make it a P+H instead of just a press on a button. TIA!

Hi All, Does anyone remember the console command to *refresh* the Weather app. i.e. change the default based on the VTP zip code?? TIA!

Hello hive mind, can anyone confirm if AUTH requirements can still be disabled on a new DMPS-4K-350-C? I have a very high end boardroom that we did an eon ago that is using a third party control interface integrated with their building management system. Its essentially a version of CommandFusion with a very custom UI designed to look like LCARS (from StarTrek) if anyone remembers them. Their DM finally died after forever and I would really really prefer to just sell them a new one and swap it out for the old one and be a hero with minimal drama. These are still 3Series if I'm not mistaken? We actually have a few of the scenarios out there and I still wish there was a magic command to disable it of 4Series...just sayin.

I wanted to control the extron dsp DMP 128 plus with Crestron Control processor does anyone having the simpl windows module for dmp 128 plus