开云体育

I think Brendon is indicating that there is a press held high in the program, not that the button is in an 'Active' state, though that may be also the case. The only times I've seen this is in the old

For this sort of thing where it’s an AC powered load, I would search Amazon for “current sensor switch”, which is a non-contact loop that you run the wire thru, that requires no direct

My understanding is that that is intentional. You can use advanced buttons in VT Pro-e to change the appearance of each state or use a different digital join for the press.

Hello, I really dislike the Jandy iAqualink and its Toggle only commands. I have a client who wants a night time scene that turns on his pool and spa lights (and some TVs on and other house lights).

After doing some troubleshooting on a system consisting of a CP4N, DM-MD16x16, DM-DGE-200-C, and a TSD-2220, I've encountered a strange issue that I can't recall ever seeing before. The issue is that

That’s what I thought I remember too, 0.0.0.0 did not work for me either. This was noteworthy to me because in most other programming environments, creating a socket on 0.0.0.0 means “bind the

Just make sure you click the options tab and host tab while the Xpanel is opening. It will use what you used last time. If you are too slow, you will need to enter them again.

Thanks chaps, I got this working by setting the UDP listener to 192.168.10.255 My main processor is on 192.168.10.4 & the processor running the listener is on 192.168.10.3 Setting the listener to

Hi Tony, I just came across your post. Hopefully you can answer a few questions for me. We have two H2's installed on a site & I have UDP comms working to both, although these don't have all the cards

Is there a way to not having to enter the Host Settings every time I want to launch/load the? .vtz file?

DN-300Z does not have a RS232 port.

What kind of output does the desired module need to have? Are we pushing to HDMI and displaying on a screen, or are we wanting to drive a narrow horizontal strip of LED’s with information crawling

Dear Team, can anyone share the Serial command for Denon Dn-300Z.

Thank you Thorsten! This is a real education for me on this particular subject (HDR, etc.).? As early on in the hi-res (4K) business, nothing was reliable so I down-res'd things for client sanity and

Just send out a reply with an embedded screenshot – that doesn?t seem to have gone through. So here again without screenshot: Hi Chris, ?- We're not using the TNV outputs. Its an audio

Oh yeah, use a program called PacketSender to test your programming. Makes it much easier to troubleshoot or test functionality of your programming [email protected]> wrote:

I'm doing this now. I have raspberry PIs with temp sensors in each room in my house, and sends data over UDP using Python. I have a Crestron User Module that listens to that data. I could have written

On Sat, Nov 23, 2024 at 03:21 AM, Thorsten K?hler wrote: > > > > * Which output are you using on the Altitude? If it?s an older unit, only > output 2 is capable of the full range. > * The Altitude

As long as you have run CrestronXpanelSetup.exe you should be able to double click on any .vtz file and it will open as an Xpanel. I use this all the time. It is really helpful when you are logged

Hi Chris, just some random thoughts: * Which output are you using on the Altitude? If it?s an older unit, only output 2 is capable of the full range. * The Altitude can be pretty picky about EDID