After doing some troubleshooting on a system consisting of a CP4N, DM-MD16x16, DM-DGE-200-C, and a TSD-2220, I've encountered a strange issue that I can't recall ever seeing before. The issue is that the fb joins on the DGE or the XPanel are passing through to the press side, for example: if the Projector_Power_On_fb (running into fb117) is high, it is driving press117 high. The same thing is happening on the analog joins (an_fb is passing through to the corresponding an_act). I've been able to reproduce this in Debugger, and any fb join that goes high causes the corresponding press join to go high for as long as the fb join remains high. Has anyone seen something like this before? The TSD, DGE, and the CP4N have been swapped out, firmware has been updated on all devices, and the program has been reloaded with the current device database.? I've also loaded the program to my bench RMC4 and I'm not seeing the same odd behavior.? As far as I know, this shouldn't be possible, but maybe I'm missing something, or there is a way to force this behavior in Simpl or VTPro, but that seems unlikely.? I didn't build the program, but I have it and I don't see anything out of the ordinary that could cause this issue.? Any help is appreciated.
