开云体育

Hi Folks, we are about to install a system with Cisco Touch 10 with room control functions. The Touch 10 will be the only touch panel in the room. I never did this before, unifortunately the Cisco

Hi Group, What is the best 32" TV for control integration currently? I have to replace a couple of 14 year old LG units that were on serial control. Last time I replaced a 32" it was with a Sony which

Thanks chaps. It's a CPU3 DM

SETL 0 That's the command Lincoln was referring to. Sets the auto-log-off time of a processor, in minutes. Zero turns the function off. -- Josh Winn The LiquidPixel Group

yes. the serial I/o product works great. ?I have used them to control AppleTVs and Mac's. ?They just appear as a wireless keyboard- easy peasy. Get the BlueSnap DB9 w/ FAST-HID firmware option and

I threw the code and the instructions into a Pastebin --- https://pastebin.com/c2MPHAZ0 -- come back and search for this later if you decide to try it. My Pastebin contains links to order the same

Hi Michael, that sounds really cool, although I might have to agree that my mileage would/will vary as I have not worked with Arduino before and don't use ChatGPT... ;-) I was hoping for a

CPU2 or CPU3 card? If a CPU3 card you may be up against the idle timeout auto logout that all 3- and 4- series processors have by default. There is a command that you can used to adjust the time or

Ok, so RS232 to Bluetooth HID keyboard? Here we go! Just for fun, I went and grabbed an ESP32 Arduino microcontroller (actually I grabbed an M5Core Basic, which is an ESP32 in an enclosure... because

Could someone direct me to a currently available and working *RS-232 to Bluetooth-HID-Keyboard* hardware adapter that could be used to control a device that accepts Bluetooth keyboard commands? Had a

As per title, I'm trying to work on a remote site through TeamViewer. Each time I step away and come back, the Tool has disconnected.

Hi Folks, Is there anyone have a working module for crestron and modbus RTU integrations., other than crestron application market which is not working for me to communicate with a VMS(vessel

This worked for me admin Crestron123

Is PAGEJOINTRANSMIT a command-line feature of the DGE-200? [email protected]> wrote:

Thanks much, metalmok; I got it working.

Hi Chris, OK, now i understand the setup. Well, I guess that?s the reason why we prefer to connect everything directly. Any chance to at least connect the sources directly to the Trinnov and then

When the touchpanel page has a join, and the interface is showing that page, the corresponding press join will go high.? This is normal behavior.? You can track what page you are on in SIMPL if you

i had to rebuild a prodigy system from scratch the composer locks 3 buttons on the keypads, top is on/off, bottom 2 are vol +/- problem is that the vol+ button doesn't have any code in the OLD days

Dear Udhayan, sorry - the 300Z has no Ethernet port either. It can only be controlled by the factory supplied IR remote or front panel buttons.

Dear Bauer, Sorry, i am looking the command strings to control DN-300Z over IP Control Regards, V.Sudhakar udhayan <igor.pero.bauer@...> wrote: