Re: Tascam players
So I'm having the same issues as the OP getting commands to work on a Tascam BD-MP4K, and the protocol guide for the BD-MP1 was helpful...to an extent. I've loaded the commands in the guide, and I can
By
Brian
·
#245627
·
|
Re: Crestron Flex video output blanking
UC will turn off display based on Windows settings. Make sure you have the HDMI EDID pass throughs installed. wrote:
By
Brandon W
·
#245626
·
|
Re: Crestron Flex video output blanking
Download and run the PowerShell MTR remediate script will fix that issue.
By
cam@...
·
#245625
·
|
I need a scaler that can take a 240hz input and knock it down to 60
Hey all, Just like the title says. I need to take a 240hz 1080p signal and drop it down to a 60hz 1080p signal over HDMI. This is for an eSports setup. I *may* be able to get away with 120hz on the
By
Josh
·
#245624
·
|
Re: Cisco Room Os 10
Yes, we have essentially removed the Cisco touch screen entirely.? We are using the Crestron screens exclusively with all the required functionality per customer needs.
By
Walter Birriel
·
#245623
·
|
IOS/android tablet tablet primer?
I have never tried using a apple or Android based tablet for a crestron? interface but would like to give it a shot.? Curious if there's a primer someplace to help get me started Thanks Chip
By
stefuel2
·
#245622
·
|
Re: Color picker widget snaps to zero
ah yes that was my issue, I forgot all about the feedback required to make it stick, thanks.
By
Bruce Levy
·
#245621
·
|
Re: Color picker widget snaps to zero
Do you have the analog inputs and outputs tied together in SIMPL? ?IIRC that is required for it to operate correctly.
By
Michael Block
·
#245620
·
|
Color picker widget snaps to zero
The " hue saturation" and "lightness slider" of the color picker widget both snap to zero after about a second of selecting a color. This makes it difficult to get an actual color, because the
By
Bruce Levy
·
#245619
·
|
Re: Crestron Home with Unifi Cameras
*It maybe more secure and easier to connect via a vpn you setup in the UDM-Pro?*
By
Luke
·
#245618
·
|
Re: Yamaha 3080 multiple connections
A couple Follow-up points for others' edification. - The Yamaha modules that the above link references are the ones that I've used successfully for both RS232 and IP control. As mentioned the IP
By
ckangis
·
#245617
·
|
Re: Yamaha 3080 multiple connections
Hi HTH, The module I'm using is this one: https://applicationmarket.crestron.com/yamaha-rx-a3010/ Chris just solved my problem, as you can see in my previous email. It was about me thinking that the
By
Daniel Arola
·
#245616
·
|
Re: Yamaha 3080 multiple connections
Hello Chris, First let me thank you for helping me. I'm still new this and documentation is really scarce. I followed your tip and... that was exactly what I was looking for!!!! I had 3 sockets
By
Daniel Arola
·
#245615
·
|
Re: Cisco room devices 4.0 - module cannot find the related CLZ on program compile
The reason for this is because of the silly decision to include half of the module on the application market download, and the other half of the module in the Crestron Database itself. Whenever there
By
Troy Garner
·
#245614
·
Edited
|
Re: Yamaha 3080 multiple connections
I think I may know what your issue is!! The module you're using has external TCP/IP input/output connections - Are you using these, attaching them to a TCP Client in the Device Symbol section?? If so,
By
ckangis
·
#245612
·
|
Re: Yamaha 3080 multiple connections
Hello ckangis, Seems like Rs232 connections are way more stable then IP connections. Those 3 I'm working on are connected via ethernet only, using 1 TCP/IP socket each on the ethernet slot of the AP3,
By
Daniel Arola
·
#245611
·
|
FS: TSW-x60 panels
Hi All, I have *(2) TSW-760-W-S?and?(1) TSW-560-B-S* All new, open box - units just have been used for a little bench testing, but basically are clean and ready to go. All include the mounting
By
ckangis
·
#245610
·
|
Re: Yamaha 3080 multiple connections
Daniel, I've been testing/refactoring my interface module for the RX-AxA series, which is ONLY IP controllable (IR of course) and I have not had any connectivity issues that you describe. I'm holding
By
ckangis
·
#245609
·
|
Re: Cisco room devices 4.0 - module cannot find the related CLZ on program compile
Copying the module and related CLZ to local folder fixed this issue. Was hoping I could use the user module folders on this PC but it still does not work correctly. Would still like to know if others
By
Tray Schaeffer
·
#245608
·
|
Cisco room devices 4.0 - module cannot find the related CLZ on program compile
Migrating to a new PC and cannot get the Cisco Room Devices 4.0 module to compile properly in my program. Opened the CiscoRoomDevicesWrapper v4.0 and cannot compile that module. Error: Statement
By
Tray Schaeffer
·
#245607
·
|