开云体育

I'm pretty confident that Apple has done a fairly good job of getting this functionality correct, meaning that "should" and "will" are interchangeable in this case. They would have a lot of unhappy

*Should Not* are the operative words... Limbert, That's likely what is going on...But it shouldn't. It's one of my biggest pet peeves with the digital age...for various reasons, things beyond our

Geof is right, maybe there is something with the content, try to see if there are any differences in the format (4K HDR, HD, FULL HD) of the content you are trying to reproduce, for example: 4K Movie

Hi All, Has anybody written an audio taper module? I have a demanding client that has an installation with WAAAAY too many Bose ESP processors and they want audio taper functionality. I have tried

The rear USB port goes to the video board and the front USB port goes to the Control board. You can use rcon commands to to get to the video board (slot 9) from the control board USB port but I am

IIRC the front and rear USB go to physically different places (the front to the video board and the back to the CPU board or something like that – or maybe I’m thinking of the DMPS-not3-300-C –

Personally, I'm more concerned about the lack of a 64-bit Android app... :-) Happy Holidays!

I’ve had quite a conversation with tech support They’re working on it is all I got. My customers not happy with me telling them, just don’t rotate your phone until we get the fix… Happy

So the front panel will not work. Only when I access the rear USB and restore and initialize does the front panel say "Rebooting". It just hangs after that. I can access the entire console from the

Has anyone heard of a fix for this, or a time-frame?? I have clients/dealers holding off on updating their phones....

If the Apple TV is configured for 720P/SDR, it should (will) not try to send higher resolutions and/or HDR. Geoff

Thanks guys! The AVR and projector definitely only support v1.4, they're 10 years old!!...:) Limbert, do you think that even if the Apple TV is set to 720p/SDR, that it would still try to play? the

Thorsten, Do you have the ADCP protocol doc that you could post? TIA!

Your post prompted me to look at the adcp protocol. I want to switch to it myself because it will give temperature feedback which I don’t think the pjlink protocol will provide. My projector is in

ADCP is just another control protocol that the Sony projectors support, besides PJLink (which is used by the Crestron module). Cheers, Thorsten Von: [email protected] <[email protected]> Im Auftrag

Hi Andrew, I did it on my own - it?s actually just a SIO that sends out the corresponding ASCII commands. Cheers, Thorsten Von: [email protected] <[email protected]> Im Auftrag von

Hi, i think it?s an HDCP issue. The ATV plays out HDCP 2.2 content and i would think the projector (and/or AVR) will only support HDCP 1.4. This can be fixed by using an HDFury Linker. Cheers,

Hello! Please check if the content has HDR or Dolby Vision, those contents need a specific HDMI cable, which could be why you see a black screen. Limbert.

Did Crestron release any information about a future Matter support? Might be more Home OS related than my regular commercial playgrounds but I'm about to change jobs and Matter, maybe even Thread,

Hi All, I've been working remotely with a client that is having an issue with playback or *SOME* content on Netflix and A-Prime. Though many titles play fine, some titles will start to play but only