开云体育

I have created a module for our Epson G5450 projectors. Everything seems to work but I have a couple questions. 1. When the projector is "Off", I get a ERR\x0D when polling the projector, I will

[Moderator's Note: Yahoo Group mangles email addresses (presumably to help protect people from spam), so if you want your email address exposed for everyone to see, do something to trick Yahoo like

I would check the same thing. You can pick up a cheap coax ground loop isolator from the shack or get something like the Jensen at the bottom of this page.

If you disconnect the cable from the cable did tou continue to see the loop? {Paf} Le 1 mai 2013 16:48, "weddellkw" <weddellkw@...> a 閏rit : [Non-text portions of this

You could also use an ATOD symbol. Negative numbers are the only ones that have the highest bit set. - Chip

Although, take a look at the help file, I dont remember if the acomp has a signed/unsigned parameter.

There you go

my values are generated with an INIT, and can range from -2d to 32d. I just gave it some more thought, and I'm thinking I can compare my value to 32,768, instead of zero, and when my value is > 32,768

Where are you getting the values from, self generated or from a device/feedback? And what is the range of values you're comparing?

I was trying to use everyone's favorite symbol, Analog Comparison (Full Set), to tell me when an analog signal was either positive, negative, or zero, but then I realized it is treating analogs as

Or you can use an abuf driven by the digital press join of the slider.

I have a client who would like us to install a simple multi-zone music/intercom system in a guest house. He is looking for: 2-4 sources, where one of the sources is an iPod 4-6 zones includes an

A cable with different connectors on either end cannot be considered "straight through". :) - Chip

I've got the same error if creating a new project and save in the default location called "projects" folder where is in server. No problem if I change it to "Public Projects" where is in C drive.

It's very easy to setup, and I've done it dozens of times. If you need to see a live example of the code let me know and i'll get you something. Regards, Cody

I just fixed this issue today. Here is what I did. Analog equate driven off econnect room id that triggers an abuf for each room that sets tp's analog fb to vol out of that room. I have 3 sets of

I attempted this several times and I still can't come up with a viable solution. I am going to do my best to explain this and if anyone wants to help it would be appreciated. I want to use a slider

Hi After eventually seeing green ticks next to all my equipment Including idoc :) i decided to try and upload And then...... An error occurred while synchronising Details... Type mismatch What does

I'm not sure why everyone is having such trouble with Grace. When I asked, I got a message with attachments including the IR protocol and IP control info. Sure - it's UPnP, but they shared it freely.

Got ya, thanks!