开云体育

FTR, we got things working with the strings as noted above. Seems to work great - 115k baud BTW...because we really need to turn it on quickly!...HaHa It still did take us 4 hours unrelated to the

How you set up FB massage for Crestron in BS player? Is it send UDP "name of feedback" in advanced section of movie files?

There is a third important setting when you want to control via lan hdbaset : in my memory it’s (in French, sorry) : ? mode attente ? activated in ? Réglage AV ? > ? sortie AV ? I don’t

There's 2 important settings in Epson projector menu: Signal I/O, A/V input to *ALWAYS ON* Signal I/O, HDBaseT communication to *ON*

My latest article, "Managing a Home’s Air Temperature Based on the PMV Comfort Model” is being published by the good folks at Residential Tech Today Magazine on their web site. Since the

Here's what we use: Power ON-- \x02PWD:1\x03 Power OFF-- \x02PWD:0\x03 Mute ON-- \x02MUT:1\x03 Mute OFF-- \x02MUT:0\x03 Input 1-- \x02INP:1\x03 Volume 50-- \x02VOL:050\x03

\x02PWD:0\x03

Many of the current generator installs they have an on board or add-on I/O and Relay board that can be programmed for various faults/statuses (Kohler calles it a PIM for example). We always tie into

Must admit, I love protocols that start and end with \x02 and \x03 :)

That's what I thought but their docu was confusing to me, with their example string... Thanks Eric!!

For Crestron you would use \x** to send a hex character. So, you would use \x03 not [0x03]

Hi All, I'll be working on a project with rs-232 control of a Seura Shade 2 TV and have the protocol doc. it lists the following for the start and end characters: ? Start with 0x02 (hex) ? End

I have one controlling a few different brands of fans plus some RF shades in the house. Jay's module works well, but I also have an ISY-994 controlling the same fans with some pretty simple commands.

We used to do this with our Generac and then Kohler. Just used a bunch of 120V DIN rail relays and then watched the inputs on the processor. Caleb Radecky | Manager, Online Products & Services

Something like this would work into the GPIO of another device. https://www.juicegoose.com/images/pdfs/Datasheets/RT-REL_Data_Sheet_R1.pdf

Update...I received a Codec Plus with OS11 and was able to check this myself (previously was working with a tech in the field). What I found is that, unlike 0S10, with OS11 if you have a Cisco widget

I don't personally use the Bond bridge or Bond bridge pro in my own home.? However, I did write a Crestron driver for integrating them with a Crestron system including the use of Bond Sidekick

The Bond Bridge Pro is incredibly reliable and has a great range. I've had the same issues and I'll always install a Bond Pro. I'm in a high-density area in downtown Chicago for the most part and I

In a related subject, Does anyone have an experience about the performance difference with Somfy Shades, between the Bond Bridge and the LinkPro Z gateways regarding range and control reliability?? I

I had to do something similar for a customer that found, during a power outage, that their generator had died and hadn’t been performing its weekly load test. We just wired the coil of a relay to