开云体育

You have to send the "Stop" command before you send another command, such as a preset save or recall in order for it to save the preset properly if you are using multiple presets. It simply tells the

In Simpl+ review makestring.

i'll check the sleep settings again to be sure mark

"I need help to write a module" The EASY way to do that would be in S+. Is that what you'd be interested in, or did you need/want to have it done in SIMPL? - Chip

Hi Rk Can you send me the Roku IP Control Command...

I need some help with some a very simple project. I need help to write a module that has 20 inputs 60 outputs where the command code is: [Input]V[Output]. and to do a single input to multiple outputs

"I also had to send a "Stop" command after the preset "Save" or "Recall"" Okay, first of all, thank you *SO* much! Second - I'm almost scared to ask - what does the STOP after each save or recall

How did you go about getting those from TBTS? I just talked to them they acted like I was crazy. Did you have to talk to someone specific? Maybe one of the days I will learn the secret handshake

Can anyone help me with a simpl or simpl + module to control/interrogate a new alarm panel I am co developing in the UK please ? I have the protocol document but due to the NDA and other legalities

Actually yes, I used the SRG-300SE IP v1.0 module, but I did have to do preset save/recall using an SIO and I also had to send a "Stop" command after the preset "Save" or "Recall" Ex: Preset 1 Save

Race between allayou and Crestron tech support. I'd *assume* this was the case, but wouldn't mind confirmation... Have this camera, and curious if anyone has controlled it with the SRG-300SE module

I haven't encountered the issue, but have seen others discuss something similar when using CEC to control a Sony TV, on a different forum. The solution there was to change inputs before sending the

"I can only assume it uses a proprietary command set beyond the required power off" Any chance it's just shutting down the CEC "listener" when it's powered off? Is there a "deep sleep" setting buried

I have tried all the IR commands that I could find I can turn it off with CEC, but can't turn it on with any of the commands in the Crestron CEC Display module I did add a 3rd power on command to the

The linear actuator is now sold. Thanks

Hallo, i have the same Problem with the modul. The Modul 1.3 dosn`t work also. The Problem is in the Simpl Plus Modul in this macro. Both moduls don`t work about a longer time. You must send only the

I should also mention that a linear actuator doesn't have to be used in the way I envisioned using it. There are lots of other projects you can tackle with a linear actuator. I recently saw a device

Thanks for your interest. I don't believe someone could force the window against the linear actuator. These things are pretty powerful and the chain drive that comes out of them is very heavy duty. I

My latest blog post, “Does an Energy Monitor Really Add Value to a Smart Home?” is being published by the good folks at Residential Tech Today Magazine on their web site. You can find the full

That looks like a lot of fun. I have a question about security. Since you have to leave the window unlocked, does the Linear Actuator prevent someone from opening the window? Does the motor stop