开云体育

I purchased a movie, in disc form, that my client wanted to watch this weekend. In order to register the digital copy, I had to download the app named Movies Anywhere to my phone. This allowed me to

I use the Grace Digital Internet radio to listen to music, mainly Pandora. I'm currently using the IR file to control it that is in the Crestron database. Does anybody have a module that allows for

I'm not familiar with those particular dimmers but, in general, you can use a SmartThings hub to integrate Z-Wave/Zigbee devices with a Crestron system with the code I host on my github -

Hi all, Can anybody recommend a cheap controller for using Crestron with Z-Wave / Zigbee? I`d like to use Fibaro or Homy dimmers and I`m looking for a gateway.

Good Morning. Well, I have been one of the early adopters of Sonos and have spent many a phone call getting chewed out for that exact scenario. The good news is that Crestron has finally fixed the

Correct, you can wire it direct just skip the (-) on the balanced input, or tie it to ground. There are many unbalanced to balanced wiring diagrams out there. If you have 2 open channels on the Avia

Have a customer that we took over. system is 2 rooms with playbars. There are more Sonos devices in the system, but not that we are controlling. He added a boost to the system a while back which

I appreciate it either way I will try that module. I have tried a couple others but not this one. I am mainly an anti-module programmer as I find Modules tend to do things that I don't want them to do

TCP/IP control on the Vaddio cameras does require a login to establish a full connection. Not sure if you are doing this or not. When I have controlled these cameras in the past, I setup a macro to

Didn't understand your original message on first reading. Sounds like you've already got a module but it won't work. Maybe you could look at the module from the application market and see what they

There is a module on the application market that I have used for tcp/ip control of a roboshot. It is listed for another vaddio camera, but I've found that all the basic controls work on several

I have a RoboSHOT camera that I am attempting to control via TCP/IP. I have read the manual on the Camera for control information and the code they give me in the manual does not appear to work. I am

I recently had an issue very similar with Samsung tvs, either the DM switcher or the sources didn't like the EDID from the samsung display. I loaded a Crestron default EDID to the switcher and it

Thank you!

Does anyone know if there is an easy way to initiate party mode on SONOS? I would like to build a button that goes out an puts every speaker on the same group (on the SONOS app, it is Select All -

I have the same issue at my house. Some of my switches seem much more susceptible than others to this issue.

FWIW, I’ve noticed this when switch itself or switch plate is screwed in too far, usually after electrician has done the install and our crew has done the engraved buttons weeks later Trey

Had this happen yesterday. It seems that the switch slid to the left and get caught under trim.

anyone else have problems with the air gap switch getting stuck in the open position, I think that people are just hitting the bottom of the switch to turn it off, and then on accident hit the airgap

Thanks, but that is rtsp I reached out to a smarty at Axis and they told me for mjpeg: http://user:pass@#.#.#.#/axis-cgi/mjpg/video.cgi?/streamprofile=profilename I was waiting till we get back on