开云体育

So I’ve had the opportunity to install quite a few of these. They are actually remarkably nice for the money. ?When they first came out they actually had a fairly nice set of discrete IR controls.

The following files and folders have been uploaded to the Files area of the [email protected] group. * /TCL TCL Universal.ir ( /g/crestron/files/TCL%20TCL%20Universal.ir ) *By:*

Hello, hope you guys are doing great. So, I just tried adding an Automate Pulse 2 hub (already configured by a 3rd party) to Crestron Home. The driver appears as ONLINE in the about tab, and all of

As Lincoln mentioned Verify the Card in the DM switcher and the Program definition. 2 Series CPU Card used 2 digit Hex the CPU3 changed to a 3 Digit. This bit a top Corp 500 when upgrading the cards

Thanks, Jeff. Yeah, I will be staging two seperste elements in SIMPL (stage 1, stage 2) and then present them to Lutron as one 3rd party Tstat. Looks like this will work...

Sometimes its the scaling on your Windows display properties. Set it to 100% instead of 150%.

It's something easy to overlook - though I am a little surprised TB didn't shine the light. Lincoln -- Lincoln King-Cliby Commercial Market Director Sr. Systems Architect | Crestron Certified Master

Are you for certain it's the Crestron Socket and the not the device. I've used the S+ tcp clients on a variety of devices without that issue. Here's my socket receive from a Vaddio EasyIpMixer which

Can the DM 8x8 CP3 handle multiple IP table entries so that it can be controlled from more than 1 physical processor? example 50 mycp3.localhost 51 mycp4.localhost

Fixed. I feel like a dumb ass. I could have sworn I triple checked that. Sent: Wednesday, June 26, 2024 2:40 PM To: [email protected] Subject: Re: [crestron] Processor not talking to

Has anyone had any luck with these TVs and getting discrete control? I have the ability to use HDMI-CEC, LAN, or IR control, but need to know if there is a solution I should pursue which others have

This is probably the problem will fix and report back Sent: Wednesday, June 26, 2024 2:34 PM To: [email protected] Subject: Re: [crestron] Processor not talking to endpoints [External Email] Is

Is your SIMPL Windows program referencing a DM-16X16 or a DM-16X16-CPU3 definition? If you have a CPU3 card but SIMPL is using the 2-series DM definition you either need to update the programming to

Oh. I didn't realize the video was fine. [email protected]> wrote:

Solid green flashing orange. It's passing video just fine. Trey Sent: Wednesday, June 26, 2024 1:44 PM To: [email protected] Subject: Re: [crestron] Processor not talking to endpoints [External

What are the leds at the DMs RJ45 connections doing? [email protected]> wrote:

Howdy, I am installing a new dm switch and endpoints in a classroom. Pro3 processor DM 16x16 cpu3 rps Usual endpoints dm rmc 4kz scaler c, dm tx 4kz 202 Programming has the correct switch setup

Found the issue within the Matrox supplied module. - T

The Crestron QSX Module Suite has a third party module, that allows you to send the temperature from another source, and it will update the palladium thermostat.

And now today I see this in todays release of Crestron Database. I wonder if this fixes the 2 series D3 scheduler: *Fixes/Changes from 225.05.001.00 to 226.00.002.00:* * Fixed an issue where