开云体育

For any one that is interest I've just commissioned NVX USB Routing, working with a Logitech Camera and Shure P300 going through a USB hub. Equipment: 1 x NVX-363 (as USB Remote as Decoder) (Logitech

I have modules that one of the team at Schneider kindly wrote. Would you like me to email them over ? If so please send me a message

That was it, thank you.? Working quick I guess, didn't even catch that and went right into a rabbit hole of overthinking

Working on creating my first XPanel in Construct. I'm using a project that has resolutions for TSW-760, TS-770, and TS-1070 panels and it works great on those panels. How do I specify which resolution

You must be using the old xpanel

I've never had an issue adding a large number of joins, but SIMPL just caught me off at 127 serial joins on an Xpanel.? This is my first time programming for an RMC-4, is that possibly the

Hi Simon, Do you still support the module? I put an email through the website and hadn't heard back. How can I get this? Thanks, Dan

If you have a programmed system already then you need to do programming in your simpl code and make pages in VTPro to make that happen. If it is a new system our software nVision Hydra has that

It worked!! ?Thank you! ?I used port 2 as you suggested for the display. ?For some reason with fiber, I thought I had to select port 3. The NVX using the Netgear fiber based M4300 switch really

On Thu, Feb 1, 2024 at 05:57 AM, Bob Baxter wrote: > > I've got a network with 5 NVX-351 in transmitter mode and 8 NVX 351 in > receiver mode on dedicated VLAN using a Netgear M4300 switch.

I've got a network with 5 NVX-351 in transmitter mode and 8 NVX 351 in receiver mode on dedicated VLAN using a Netgear M4300 switch. ?Everything has the latest firmware including the Netgear switch.

There is nothing built into the panels. You have to change the program and panel to create a password protection. In other words, you have to get the person that programmed the system to add this

I have key code protected settings pages on all our touch panels in our classrooms here at Dalhousie University. I am using: Password Logic (fixed pwd) (cm) module OR gate Simple_timer_v1_0_1 (cm)

I’ve done one, it’s just a full screen subpage that covers up the main menu screen and goes invisible when the correct passcode is entered. Mike [email protected]> wrote:

I believe that health and wellness is an important function of smart home technology.? With this in mind, and that people are looking for help fulfilling their new year's resolutions for fitness, my

Unable to find any resource to add device passcode on TS-1070 touch panel? Too many people touching the touch panel and i wanted to have locked. I do have access to Toolbox, processors and if any

TB just helped me fix this one, but I'd thought I'd throw it out here in case it hits anyone else. Visiontools suddenly stopped opening my projects, it would just give me "Error! Cannot create

Instead of adding another 363, why not just replace the existing 363 with a 351. Use the dual HDMI inputs of the 351 and ditch the costar. Use the signals in the Kaleidescape module to determine which

We had a similar issue a while back with the identical setup. We found that a simple reboot returned the system back to normal operations. Best regards, Michael S. Moran

Hi; Yes, spent a while on the phone with both Bob and Rusty ensuring it was correctly set up.? Rusty noted some messages about EDID errors when the M500 tried to play but was unable to actually