开云体育

Do you have a mac reservation for the Roku's IP address in the router? If not that is why. That is the only IP control issue, I have seen with Roku on any platform.

We have a CP4R and use Crestron Home to IP control a Roku Ultra. The app will work fine for any number of days, then no control at all with nothing changed in he setting or anything. The Crestron Home

Yep.? Ether roll back to D3 - 3.05.001, Crestron Database 212.00.002.00, Device Database 200.180.001.00 and SIMPL from the same era... or edit the program in simpl and fix the scheduler.? It was a

Yes this was confirmed by Dave H on the FB group. They have no intention of fixing it because 2 series is EOL. Which really pisses me off as there are so many 2 series D3 jobs out in the wild running

The?Meanwell SP-300-24 is the power supply inside the 300W Cresnet power supply I just had to open up. That part number appears to be obselete (well, people are selling them "reconditioned" online

In case this helps others: I updated an old job the other day, it was a D3 system on a PAC2M. After I'd long gone the client complained that time of day events weren't happening any more. After poking

Hi LEvans, I have mine setup with VM VC-4 and there is not much to configure. Under Settings>System Setup there is a Crestron Fusion Server URL which points to your instance of fusion. The path

No, i checked the settings for the app before. Looked good to me and are the same after the re-install. Perhaps something was screwed up with the first installation and got sorted with the re-install.

OK, but that brings the network permission for the Crestron Go app to my mind. Maybe after the first install you didn‘t allow it and with the second you did?! Not shure what the behavior would be if

Hi All, anyone have one of these that they'd like to get rid off? Regards

It’s in the quick start guide. pull the air gap, press and hold the bottom button the close close the air gap button and it will set the dimmer to forward phase. if you need to get it back to auto,

OK, guys – i got it working. Deleting and reinstalling the CrestronGo app did the trick. Cheers, Thorsten Von: [email protected] <[email protected]> Im Auftrag von Thorsten K?hler Gesendet:

Hi all, communication should be open, nothing blocked. But i?ll move the iPad into the same subnet just for testing and report back. Everything else (files, etc.) seems to be OK. Cheers, Thorsten

Have you tried the blocked IPs command through text console to see if the IP is being blocked? You can also connect to the processor and go to the authentication settings and see if the admin account

Hi, so for this seems to be an issue that the iPad can‘t reach the processor or better not with all necessary connections. Because you don‘t get an error message I can‘t believe it‘s a

When you placed the iPhone files in the HTML folder, make sure that you you are transfering two separate files, not the one folder.

I'm trying Lincoln's solution mentioned above, since I'm not having the luck that others apparently have with the Global Cache devices.? ?However, despite being set up how I feel is properly (same

Hello, have any of you ever used the BACNETRegasfd (register as foreign device) command from the processor console? I want to communicate with a bacnet controller that is on a different VLAN (I can

If you are looking for the buttons to show feedback then that is not a feature. If you are just looking for button presses then, I just tested this on a TS-1070 using latest firmware without an

How do I activate these ? I tried using the default Slot One in Simpl, my Signal works through Debugger (close App). However the button does not. I also tried VTPRO reserve Close APP and that does not